Enigma 2 by The_ripper - TEST -

[mworker]

Tested the latest 1.0.29 and it was very promising.
Very good work Ripper and team.

But why is some HD channels stuttering? Any one else had this? For me discovery HD and BBC HD worked a treat but Canal+ Sport HD and Canal+ Film HD (Swedish Canal Digital 0,8W) was stuttering like hell.

I also see this stuttering in HD channels but only when there is no sound.If there is sound,channel works fine.So i think when Ripper fix the audio part HD channels will be ok.

[AAOM]

The problem is the pendrive!!!
Change pendrive, problem solved!!
E2 to fw oficial==> OK
Fw oficial to E2==> OK

Continue with the problems.
Azbox has been locked and I needed to reboot. IP appears always on display. But I have nothing to USB. Reinstall E2, Azup say everything is ok, but kernel copying E2 display appears. After a while, reboot (On display continues to appear the same) and IP reappears. E2 does not install, although Azup says that everything is installed.

[digihoe]

Continue with the problems.
Azbox has been locked and I needed to reboot. IP appears always on display. But I have nothing to USB. Reinstall E2, Azup say everything is ok, but kernel copying E2 display appears. After a while, reboot (On display continues to appear the same) and IP reappears. E2 does not install, although Azup says that everything is installed.

How big is your USB pendrive?

[halabessa]

Guys,

Found this on another forum..... thanks to philippe146

File attached.... hope all of you will give some feed back after trying.

ENJOY:respect-059:

[erlander]

I also see this stuttering in HD channels but only when there is no sound.If there is sound,channel works fine.So i think when Ripper fix the audio part HD channels will be ok.

Ok thanks

[AAOM]

How big is your USB pendrive?

I tried several. One of 256 mb, another of 512 mb and a 2 gb. Sometimes it installed well and sometimes does not work. I now use 256mb.

[digihoe]

I tried several. One of 256 mb, another of 512 mb and a 2 gb. Sometimes it installed well and sometimes does not work. I now use 256mb.

Here: https://www.satpimps.co.uk/showthread.php?t=141890 sattommy specified that one should use 512 megs (that 256 might work but that it also might not). Try with bigger pendrives only to see if this resolves your problem.

[bluedawe]

Here: https://www.satpimps.co.uk/showthread.php?t=141890 sattommy specified that one should use 512 megs (that 256 might work but that it also might not). Try with bigger pendrives only to see if this resolves your problem.

I've tried several 2 gigs, one 4 gigs and two 8 gigs without any problem...

[Cirio]

5.1 channels working?

Yep!!

Watched Dante's Peak in DTS and THe Mentalist in AC3.

Bye,

[arcibald]

Ok just to make you enjoy your weekend, here is a dvbmedisink update.
-Fixed hanging of mediaplayer when exiting
-Put spdif output to compressed (yes you can hear dts now ;-))

Known problem:
-Loss of sync after pausing or using numbers to seek in file
-For the rest, what works works, what not will maybe work in next release ;-)

Howto install:
-Copy both .so files into /usr/lib/gstreamer-0.10/

Hi

I do not think it was reported ... but

I renamed the record file ts in m2ts ... registered with the official firmware 0.9.5020 ... and now you can see and hear in Dolby Digital on my Onkyo amplifier ... only the audio goes out of sync with the frame ... as normal and get this initial warning msg:



Regards

Arci

[@telesat]

Continue with the problems.
Azbox has been locked and I needed to reboot. IP appears always on display. But I have nothing to USB. Reinstall E2, Azup say everything is ok, but kernel copying E2 display appears. After a while, reboot (On display continues to appear the same) and IP reappears. E2 does not install, although Azup says that everything is installed.

How big is your DOM ?

If you use unofficial/nonstandard solution for DOM, replacement with CF and use IDE2CF adapter with additionally power supply (DOM use power from IDE connector and OS have full control) - you must to use DOM no CF , because when use IDE2CF adapter , OS haven't conntrol on power supply on CF because you use additional connector for power, DOM use power from IDE connector and OS have full control, and after make partitions and reboot azbox - must reset CF , but when use IDE2CF adapter this is not posible.

so , solution to your problem is - use DOM , no CF with IDE2CF adapter .
of course you can use bigger DOM , but DOM , no CF

rgs,
telesat

[AAOM]

How big is your DOM ?

If you use unofficial/nonstandard solution for DOM, replacement with CF and use IDE2CF adapter with additionally power supply (DOM use power from IDE connector and OS have full control) - you must to use DOM no CF , because when use IDE2CF adapter , OS haven't conntrol on power supply on CF because you use additional connector for power, DOM use power from IDE connector and OS have full control, and after make partitions and reboot azbox - must reset CF , but when use IDE2CF adapter this is not posible.

so , solution to your problem is - use DOM , no CF with IDE2CF adapter .
of course you can use bigger DOM , but DOM , no CF

rgs,
telesat

I tried with original DOM and DOM adapter and I have the same problem several times. In tests I've used flash drive of 256MB, 512MB and 2 GB

Now, I formatted SDcard with HDD Low Level Format, I have again the DOM adapter with SDcard formatted, I installed everything and it works well. Maybe a bit slower, but Azup has not given me any problems.

Took several days installing and uninstalling E2 with different problems. Most of the time, Azup says that everything is finished, says Azbox restart but the display does not say the same thing.

Can you explain one thing?. E2 is installed, Azbox crashes, Azbox restart, why, sometimes, IP appears in display if there is nothing in the USB port?

If you are interested, everything is published, but is in Spanish.

Sorry for my english.

Regards

Edit: My SDcard for adapter DOM is 4 Gb.

[@telesat]

Can you explain one thing?. E2 is installed, Azbox crashes, Azbox restart, why, sometimes, IP appears in display if there is nothing in the USB port?

If you are interested, everything is published, but is in Spanish.

You get IP on display if :
1.in AZBOX is inserted usb stick with file : patch.bin
or
2.if E2 files is not present on DOM (or OS don't see DOM) -(your case)

Ofcourse i'm interested for more info , pls give mi link for Spanish explanation.

rgs,

[adrray1974]

Have been following this thread for a long time now, and decided to have a look at the New Enigma 2 image, 1.029.

Put Patch on a 32GB USB Pen Drive, formatted Fat32.
Installation went fine using AZUP 1.1

All booted correctly.

Scanned 28.2 on intermediate settings, and only found 235 channels, so changed to Basic, rescanned and found more channels, so was happy there.

Channels would open, however as already mentioned, you dont get audio ALL the time, and as well as no audio all the time, the channels without audio also had a stuttered image.

If you flick up and down on the channels till you get audio, then the channel with audio works fine.

Tried to mount Network drives, but to no avail.

Installed CCcam 2.1.4 and all worked fine.

Due to the lack of audio with channels, unless i flick up and down till i get audio, i un installed and went back to official fw.

As a first impression, looks good. Remote for AZBox seems to have functions on diff buttons.. but trial and error you get to see what the buttons do.

Will wait now untill there is a stable release which has no problems with audio, then will look at trying to mount my network drive.

Keep up the good work

:king-042:

[AAOM]

With DOM adapter I got it to work. Now, I have original DOM. Azup says: "E2 succefully install, remove USB stick and reboot" but in display Appears "E2 Copyying Kernel." If I restart IP appears in display. E2 is not installed. Solution? I remind you that is original DOM.

I do not know how to power the DOM adapter can you tell me where to look any scheme?

All tests are in:

http://www.azboxhd.es/foro/forumdisplay.php/82-Enigma2

I would like to know your opinion on this:

http://www.azboxhd.es/foro/showthrea...M?goto=newpost

There is a fellow who says he should not start if the SDcard Azbox is formatted and E2 is installed in Azbox. I want no one break your Azbox for listening to me. It works for me, but of course, I understand I had not installed E2. But if IP appears in display, I do not I have official firmware installed.

I hope you do not disturb too. Just trying to test and get some conclusion.

Regards

Edit: Yet, for ten minutes, appears on display Copying E2 Kernel. I have closed the popup Azup. I will restart.

[simon30000]

this continuous booting prob that i have. + many others when a flash goes wrong
got the nokia cable bt 4 pins very tricky to get this connected to putty in to yamon
question from me is
is there any other way or anything that we could put on usb stick maybe, not bin file maybe is there somthing else that would work to make az realize to stop this continuos booting
is there or could there be a special magic patch with defalt ip that az could my az premiem boot up directly into menu

[AAOM]

E2 not instaled!
Appears IP in Azbox display. I do not understand.
Because Azup says that everything is ok then?

[@telesat]

E2 not instaled!
Appears IP in Azbox display. I do not understand.
Because Azup says that everything is ok then?

Because ...
AZUp don't know what you doing , remove medium after copying the files with azup, use unoficial dom...

so , if you want to spam forum - this is your choice
if you want to test e2 - use standard configuration of AZBox.

rgs,
telesat

[AAOM]

Because ...
AZUp don't know what you doing , remove medium after copying the files with azup, use unoficial dom...

so , if you want to spam forum - this is your choice
if you want to test e2 - use standard configuration of AZBox.

rgs,
telesat

No, no: You have not read all.

Now, I have original DOM. Azup says: "E2 succefully install, remove USB stick and reboot" but in display Appears "E2 Copyying Kernel." If I restart IP appears in display. E2 is not installed. Solution? I remind you that is original DOM.

I can only think that original DOM is broken. is there any way to format?

Regards.

[moicas3004]

No, no: You have not read all.



I can only think that original DOM is broken

Regards.

After instalation warning have you removed the usb from the box? then, without the usb make the reboot.