check my previous answer as I have amended it after comparing it to the info text file
check my previous answer as I have amended it after comparing it to the info text file
check my amendments above and try them outOriginally Posted by B.M.
well im pretty sure ive done what you said mate but nothing is clearing - does it normally take time for it to clear or should it clear straight away ?
BTW i really appreciate all the time and effort helping me with this as with my eagle i just dropped the c line on a text file and away it went with no dissecting it(i know its totally different with this)
so yeh tthanks for the help
I would have thought that if its correct it should work within seconds like the eagle , assuming you have done it all correctly
I dont have your box so cannot test it , but its similar on the icecrypt as you can see from this post here
https://www.satpimps.co.uk/showthread.php?t=128716
yep just checked it again and it does seem ive done it right but nothing - the cline is deffo working as ive just loaded it back onto the eagle and it fired up straight away.
so near buy yet so far lol
i know its cheeky but you accept a PM to take a look and see if theres something obvious that i cant see mate?
hello lads.
well well well
im up and running - dont ask me how but i am and the only thing i really did that was different from all the help above was change my ip addy from 10 and changed it to 3 at the end.
i want to say know how much i appreciate all the help from you all because i know it can be frustrating trying to help someone who sometimes gets flustered like me.
i owe you all a beer :-)
BM
so you have CCCAM running? all I have running is newcamd. Looks like there is an issue with the IP address?
When on IP 192.168.1.X subnet mask 255.255.255.0 not connection takes place?
While on IP 172.19.3.X subnet mask 255.255.0.0 newcamd connects?
should not happen, but it does?
Technomate 6000 HD Super users, can we have a report back from you and tell us what cam you have working and on what IP address?
Newcamd 172.19.3.5 subnet 255.255.0.0
hi modem chooses on dhcp enabled
ip 192.168.1.67
subnet 255.255.0.0
tried other ip addresses in range 192.168.1.64 to 192.168.1237
with dhcp disabled had no luck
using ccam seems like it only likes certain ip numbers ??
well it does seem it was the ip addy issue mate because for some reason when i unplugged the box last night it was working great.
then this morning before i turned the box on my lad was on his xbox360 and our network is setup with ethernet homeplugs so it issues automatic ip address on th ehome plugs.
but my TM is plugged staright into the router so when i plugged the box on this morning all i had was scrambled channels.
i checked my lads ip addy on his xbox and it had allocated the same ip addy as the TM so as soon as i changed the ip addy of the TM bang everything cleared.
strange but thats all i can say that happened because i was doing the c line ok as i had it checked by a top fella :-)
ive experimented again tonight by turning both the xbox off and the TM off and it happened each time so there is deffo an ip addy issue with homeplugs i guess.
i just hope all this hair loss since i started this will help others with the same issues ive had and all you lads have been superb in your help which is very much appreciated.
TM-6900 Super
hi mate have CCCAM running .l am get the same here mate. l change it to 3 seconds .but it still doing the same .l have three lines connected
and wont is happening to me one is connected and two go off a then other 2mins again the three lines will connected again.and sometime the three of them will be all ok .for some mins and then it go again to me but my pc will have internet can anyone help me with this please all
i want to say know how much i appreciate all the help 2 Giga 2 all Thank
@B.M.
in the modem/router somewhere where the DHCP is defined you can change the range DHCP has to assign the IP adresses for hand out
move the start address up to X.X.X.4
this would mean the X.X.X.3 address would no be handed out.
in TM Main Menu: System Settings: IP Settings: take note of the IP details there
IP Address: X.X.X (1st 3 groups only)
Subnet Mask: X.X.X.X
Gateway: X.X.X.X
DNS: X.X.X.X
Change DHCP Usage to OFF
and fill in the same details from above just with this change:
IP Address: X.X.X.3
@alboke
somewhere in the router you can change the range where the home network operates in
the router access is now 192.168.1.1 change this in the router to 172.19.3.1
IP pool start 192.168.1.2 change this to 172.19.3.4
IP pool end 192.168.1.127 change this to 172.19.3.127
subnetmask 255.255.255.0 change this to 255.255.0.0
you can then setup TM as above
keep in mind if your using static IP elsewhere in the homenetwerk (computers, ...) to change this to
the login address changes to 172.19.3.1
more details would be in the router/modem manual or in the web interface help.
If you doubt anything ask these before, if you don't and mess up the router/modem settings you can loose the internet.
take note of all your provider settings (username, passwords, settings, ...) to have access to all services provided: like internet, phone, TV, ...
take screen shots, or if you know someone with good knowledge on these: ask her/him
hello lads.
well after all the trouble getting the TM up and running i decided to sell it as i wasnt comfortable with it because im used to linux based box.
ive now got myself a DM 800 HD and got it up and running sweet and must say i feel really comfortable using it and as i said in an earlier post on this thread that i thought i made a mistake in buying theTM although i did like the menu layout on it.
so anyway thanks for everyones help once again :0)
BM
Giga, pls help!
I did everything even patching again the tm 6900super, but no connection, when i press 8281 i get the menu and i put all the details but still on the status shows disconnected.
any help pls.
7.22p?
cccam or newcamd? try newcamd first on one of the test servers.
have you checked your modem/router firewall? is there a log with blocked events?
Input Rule
What is blocked to technomate?
if there is blocked traffic to technomate create a rule allowing TCP traffic to only TM
Output Rule
what is blocked from technomate?
If there is blocked traffic from technomate create a rule allowing TCP traffic from TM to any address
Don't decrease timeout in TM set this to 09 seconds
your ping to the server should be as low as possible, lower then < 9 ms. local < 2 ms
what is your current home network range?
Last edited by Giga; 29-04-2010 at 01:14 PM.
still cant connect iam having another beer.
Posting Permissions
Reply With Quote
Bookmarks