Enigma 2 by The_ripper - TEST -

[damo]

the problem of standby is finally resolved?

[DragontearS]

witch stand by problem?

[damo]

if the box is on standby for a few hours ,later, trying to turn it will reboot... have you a solution?

[sectorNOlimits]

if the box is on standby for a few hours ,later, trying to turn it will reboot... have you a solution?

With RC3 you have to disable scheduled download of CrossEPG.

[EDIT] Standby will work, but clock will be slower a bit. Half an hour in 8/10 hours.
SNL

[nstergi]

hi

just a noob question....

are we still limited to maximum 1 Tb HDD with enigma 2 as the same with original fw or it has nothing to do with software????

thanks

[numark0504]

does somebody know how to stop playback of a record. when i go to the recordet files ( guide key on remote control) and start playing, i can´t stop the playback....has somebody a solution?

[zeini]

Try do press resolution-button.

[numark0504]

Try do press resolution-button.

it works, thank you....

[numark0504]

is it possible to change the signal quality from % to dB ? i habe an azbox elite. when yes, is it the same way as on the dm800 ( edit skin.xml...)?

[numark0504]

is it possible to automount a smb s hare on startup, i had no success with the bootup file, first it works and suddenly ist doesnt work any more....i havent changed something.... or is a mount manager available?

has somebody success with the automount with bootup?

[sectorNOlimits]

is it possible to automount a smb s hare on startup, i had no success with the bootup file, first it works and suddenly ist doesnt work any more....i havent changed something.... or is a mount manager available?

has somebody success with the automount with bootup?

I've inserted a line in /etc/fstab so each time the system bootup it automatically mount what I need.

have a look here:
https://www.satpimps.co.uk/showpost....5&postcount=39

SNL

[numark0504]

works perfect :respect-055::respect-055::respect-055:

[numark0504]

Recovery procedure
__________________


* For all people which have a problem with fleshing Enigma 2 in AzBox , where installation stop ~58% and now have a BOOTING message on display.

You will need :

- Application Acronis True Image

- E2Backup.tib

- External HDD case with IDE controller ( or if You are working on PC, Motherboard which have IDE controller ) .

Take the DOM from AzBox and connect it with IDE connector from Your external usb case for HDD .

Connect the red wire from power cable ( 4-pin Molex connector ) from case ( +5V ) ( picture: Molex and pwrcom ) with right oriented pin on connector which is on DOM - pictures DOM1 and DOM2

Connect USB cable from the HDD case with Your PC.

Now, startup Acronis True Image application, and choose Recovery from the menu on right side - picture 1

Choose Disk Recovery on the top of the window and load file E2Backup.tib and press next - picture 2

Choose Recover whole disk and partition and press next - picture 3

Check-all whole Disk, so it means two partitions : Ex** and Linux Swap and press next - picture 4

Choose on which disk You will restore content, in our case DOM, and press next - picture 5

Commit with OK - picture 6

Choose Proceed - picture 7

Wait for few minutes that process complete - picture 8

When the restore of data and partitions finish, press Ok - picture 9

now You can exit from application, 'Safely' eject Your external USB HDD, in our case DOM.

Disconnect usb cable, and put back the DOM on AzBox, turn on AzBox and wait for 20 seconds that E2 boot.

Now you can take a look on enigma, and when You decide to go back on Official version of Firmware, that You can do with plugin from DDdamir.

Installation od DDamir plugin is described in another tutorial.



hxxp://rapidshare.com/files/407099608/Recovery.rar.html

rgs,

has somebody this archive yet? please upload ist again

[milytres]

Hello,

Can I connect the card AZboxHDpremium + Freeview on PCIE PC so you can test?

Greetings.

[MoRpHiUS_x]

has somebody this archive yet? please upload ist again

What version of E2 have installed?

[rudiniiwwa]

What version of E2 have installed?

I have RTi core RC4, but stock on booting. I try recovery procedure with acronis. On PC acronis told me 100% ok, but when i plug DOM to azbox=booting problem still exist. I try to connect putty by pl2303 rs232=usb on 115200 with this result=

żHJ˝ÓÔ*úż!)żŻ*ëĺ7%şżŻÖű '
'š;;557=JZĺy˝ľľľľľľľľľľľľľľľľľľľľ ľľľľľľľľľľľľľľľľľľŢoíË}=ż
(Ę_5ż5'š;;557=5 Łĺ덿y!#3-1-!#żŻ9/-ż--!#ż*ĺ덿żżżU5żi{żw[}eż=ż=9)Łĺ덿żżżY!Og!=żŁeo5Ą3'=/żŻ*ż%=57ż!ż9Łĺës!#7żOucSż;'!9)ż=ż 9Łĺëy_Uż9'!9)ż35#9
żŁeo'!9)ż35#9
A9Ż3A9Ż3żż=ż9!#!'5Łĺë{!=żmwŁżťuĺë y/-ż[5--!#żżŁŁże=9/57ŁĺëY5-#1żżoĄQż3OucSż;'!9)ż=ż9ŁĺżY5-#1żYMYygiż=9')A%ż!żŁĺëżżY5-#1żYMYygiż/ŁĺëżżY5-#1ż_{ż753='ż-%-#1ż!żŁĺëżżY5-#1ż_{ż-%-#1ż!żŁĺëżżY5-#1ż_{żU5ż-%-#1ż!ż3ŁĺëżżY5-#1ż_{ż-%-#1ż!żżmeżmYżUY{ż_ymw5_ymw5żYy}[wĺëżże}yż5ĺëżż_ymżm[]żĺëżżżżmwYugżżmcW}Żš*żÚcW{Żš*żÚcW yŻš*żÚcWwŻš*żĺëżżżżmwYugżżmcW}Żš* żÚcW{Żš*żÚcWyŻš*żÚcWwŻš*żĺëżżY%== ż-#ż=-1#%5#ĺëżżżżassż-#ż
żĺëożżżSż-#ż
ż!ż ŁĺëűËŐ-#1żży'5=#żw--75ż!żo
ŁĺëżżY5-#1żży'5=#żw--75ż!żo
ŁĺëżżY5-#1żży'5=#żw--75ż!żo
ŁĺëżżY5-#1żży'5=#żw--75ż!żo
Łĺëű}ľ
ý7-7==ż
żĄĺëűŤőm]}żq_maż%!75Ą7-7==ż
ż5ĄĄĺëűMý;'!9)ż5-#1ż9!%'557Łĺ뎪#7ż5--#1ż%5%931żw[}eŻ*§żw[}eż=żĄĄĄŁĺëw53='ż;!!ż-#75żĺëVNO¤¤iúŰ
Íeý-%=15ż=ż9żŻ*żŁ§ż-!#7Łĺë[aesYż3!#7ż=ż9§żS!'%5ż#=%5ż
=%!#AuYAŁ;-#żŻ=ż9ż555ż*ĺëżży/59)-#1ż#1żA'!=7A
żA'!=7ż3!żŁŁżXZy˝űË˝59)-#1ż żŁŁĺëyy˝^^ŢŻĺĺë卍ŤŤŤŤŤŤŤŤŤŤŤŤŤŤŤ ŤŤŤŤŤŤŤŤŤŤŤŤŤŤŤŤŤĺĺë卿M}eacż[aeże!#-!ĺë卿[5--!#żĽYmqe}wuYmqcYĽżż9!75żĽ§żĽĺĺëĺ5 7ż7==żĽ§ż_yżĽĺĺëĺ]¤˘i*Şşż=;'5żą=ż5-Łż}3557ż=ż=żM}eacż9!%%=#7ż=#7ż559 57Łĺĺëĺ_żyyżŻ!7!ż{[u}i*!ż;!!ĺĺëĺżżżżżżżżżżżżĽĽĽżż-''ż3=-'ż-/ż[eA{UYMĺĺëĺżży/59)-#1ż
;!!ż-1#=ŁŁżż-ąż#!ż
;!!ż3-'5Łĺĺëĺużm#5'§ż9!75ż
ż33333333ĺĺëĺS_YXŹ°

Can somebody help me? śó
PS sorry for my english

[voki081]

Baud rate 11520 or
Try to reverse TX and RX pin

[rudiniiwwa]

Baud rate 11520 or
Try to reverse TX and RX pin

When I reverse Tx and Rx is not working.

[zeini]

@rudiniiwwa:
Try an other cable. You have not enough level at your serial cable. Try a cable as this

[voki081]

When I reverse Tx and Rx is not working.

Did you selected right speed (115200) in Putty?