With the current release (RC3) I have image problems: in every channel, even if in shutdown image, I have horizontal thiny rows. I use 1080p 50Hz (or 60Hz) with or without deinterlace mode.
What can I do?
With the current release (RC3) I have image problems: in every channel, even if in shutdown image, I have horizontal thiny rows. I use 1080p 50Hz (or 60Hz) with or without deinterlace mode.
What can I do?
How can i install picons on hdd, i have tried but have no success.
Originally Posted by Karabey
good morning
it's easy act like this:
1-with dcc - create folder /HDD
2 create symlink "ln -s /media/hdd/picon /media/usb/picon" that fools the system and now all you have to is put your picons in hdd that you'll find media/hdd/picon
3 restart azbox and that's it
MX700
Got the impression that this fix only was for P+ and Ultras, is it so? With an ordinary premium changing the HDMI output works quite shaky. I have to powercycle to make the change work otherwise I get a black screen for the most of the time. Using the RC3 without the fix.
Last edited by T33; 21-01-2011 at 01:00 PM.
Try shutdown and poweroff for some time.
For me works.
Regards
by me its only working for one map if i put de code twiceOriginally Posted by sectorNOlimits
You can "mount" shared folder by windows on yor E2 system that way:
add to the fstab on your /etc folder one or more lines like this, one for each mount:
Code:
\\\\<WINDOWS-IP>\\<WINDOWS-SHARE> /media/music cifs username=user,pass=password 0 0
before rebooting the system make the destination folder (in this sample /media/music)
SNL
like this
\\\\<WINDOWS-IP>\\<WINDOWS-movies> /media/movie cifs
\\\\<WINDOWS-IP>\\<WINDOWS-mymusic> /media/music cifs
it only mounts movies to movie but it will not mount mymusic to music
movies are on pc's drive E
mymusic is on pc's drive D
Sounds like a protection proiblem of the share.
Try:
# mount -t cifs \\\\<WINDOWS-IP>\\<WINDOWS-movies> /media/movie -o username=xx,password=yy
And make sure the directory /media/music is created
I have problems with Sound on some Channels on Astra 19,2 E.
For example with RTL. Theres no Sound, only a intermittend Audio Signal.
Switch Channels doesnt help.
My Az is an premium.
Can i change something in Settings to solve the problem?
THX
how to configure usb wireles or do i install any driver for elite
regards
Last edited by triplexxx; 21-01-2011 at 02:29 PM.
I install this program without problem
NzbGet Installer V1.0 by Waspy.zip
Here is the latest software development for azbox hd systems: nzbget installer.
This little program allows you to configure nzbget (a newsgroup download utilty) and install it onto your azbox hd.
It supports both original firmware as Enigma2.
General notes:
Configure NZBGet settings and press the install button to install the NZBGet program on your AZBox HD.
Note that settings are saved when the program is closed.
Multiple profiles can be used for multiple configurations or multiple azboxes.
Enable autostart to start NZBGet automatically.
Copy your nzb files (ftp/samba) into the configured nzb directory to start downloading files!
This software is to be considered freeware.
Tested with firmware 0.9.5020 on AZBox HD Premium and Enigma2 RTi 1.0.3 BETA on AZBox Elite.
This program is tested on Windows 7 and requires dotnet framework 3.5.
and now can I see AZBOX on PC network and can browse the files...
but how can I see my PC in Azbox ...and where??
please HELP
Last edited by Bertole; 21-01-2011 at 02:53 PM.
nope don't workSounds like a protection proiblem of the share.
Try:
# mount -t cifs \\\\<WINDOWS-IP>\\<WINDOWS-movies> /media/movie -o username=xx,password=yy
And make sure the directory /media/music is created
the strange thing is if i take music alone its oke
if i take movie alone its oke but two shares won't work
is there sombody that has 2 folders from pc mounted to azbox
and are the folders on diffrent drives?
Yes, I have.
This is the output of "mount" command in a shell:
And these are the two lines I have added to my /etc/fstabCode:root@AZBox:/media# mount rootfs on / type rootfs (rw) /dev/hda1 on / type ext3 (rw,data=ordered) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) udev on /dev type tmpfs (rw) usbfs on /proc/bus/usb type usbfs (rw) tmpfs on /var type tmpfs (rw) tmpfs on /tmp type tmpfs (rw) /dev/hda2 on /boot type ext2 (rw) /dev/hdb5 on /media/hdd type ext2 (rw) devpts on /dev/pts type devpts (rw) automount(pid1749) on /autofs type autofs (rw) \\192.168.8.101\cd on /media/g type cifs (rw,mand,unc=\192.168.8.101\cd,username=user,uid=0,gid=0,rsize=16384,wsize=57344) \\192.168.8.101\music on /media/music type cifs (rw,mand,unc=\192.168.8.101\music,username=music,uid=0,gid=0,rsize=16384,wsize=57344)
This the output of ls command in the two /media folder:Code:\\\\192.168.8.101\\music /media/music cifs username=user,pass=password 0 0 \\\\192.168.8.101\\cd /media/g cifs username=user,pass=password 0 0
And I'm sure I can continue mount any share I need/want.Code:root@AZBox:/media# ls g 01 - Led Zeppelin - Since I've Been Loving You.mp3 03 - Led Zeppelin - Ramble On.mp3 03 - Led Zeppelin - Stairway To Heaven.mp3 04 - Led Zeppelin - Black Dog.mp3 root@AZBox:/media# ls music ACDC.Live.at.Donington.1991.720p.BluRay.DTS.x264-CtrlHD.mkv ACDC_-_Black_Ice__2008
Try to test the sharing with another windows PC (Windows to Windows), maybe the issue are privileges...
SNL
Last edited by sectorNOlimits; 21-01-2011 at 03:32 PM.
Sometimes it occurs also to me, I've a PremiumHD. If reboot the issue remain, if I switch off from the back switch, then switch on again the tiny lines disappear.
This issues was verified also with other RCs.
SNL
Please read a mine upper post (#72). I explain how to mount shared folder from Windows.
SNL
I did, now works fine.
I can see the 2 maps on other pc's and also change things in the mapsTry to test the sharing with another windows PC (Windows to Windows), maybe the issue are privileges...
SNL
but i cant see the second map on azbox strange.....
mount -t cifs \\\\192.168.x.x\\Film /media/movies -o username=,password=
mount -t cifs \\\\192.168.x.x\\Films /media/shows -o username=,password=
renaming the map also dont work
this is the problem
it mounts only one so both maps work only not togheter
fix the problem;, I change skin on BlackShadow2 (before I have HD Glass 16) and all is OK. HD programs are pure on 23,5 - 19,2 and 0,8:applause-003:
Last edited by johank; 21-01-2011 at 05:41 PM.
does anybody know how to set up smargo+mbox 06+total tv? i am trying for 2 days but no luck. newcs doesn't read my card.
this my log from newcs:
This is NewCS 1.67 RC1 [Build: 95] - the New CardServer by the Butter-team..
Compiled on Jul 14 2009 at 1153
Reading Config file from /var/tuxbox/config/newcs.xml
NewCS is trying to bind to IP: 192.168.1.3
TCP-log password is disabled!
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 19:03:05 ] [ Box detect ] Box type 15 (Azbox)
[ 19:03:05 ] [ Config ] Irdeto EMM mode 0 SET on reader smargo
[ 19:03:05 ] [ Config ] Option <blockc0> for device 0 (smargo) not present, defaulting to NO
[ 19:03:05 ] [ Config ] Pincode for device 0 (smargo): 0000
[ 19:03:05 ] [ Config ] /dev/ttyUSB0 ECM priority: round
[ 19:03:05 ] [ Chameleon2 ] Adding name myname on destination localhost (Realm: myShares) on port 1234 - 0x10019548 [ op ptr 0x1001fcf8 ]
[ 19:03:05 ] [ httpd ] httpd-user: dummy, password: dummy, accesslevel: admin
[ 19:03:05 ] [ EMM Cache ] Initialising dynamic Cache
[ 19:03:05 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 1943
[ 19:03:05 ] [ Loader ] Starting Telnet on port 1001
[ 19:03:05 ] [ Loader ] Started HTTP-server on port: 8080
[ 19:03:05 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0
[ 19:03:05 ] [ Phoenix ] Opening device /dev/ttyUSB0
[ 19:03:05 ] bind: error! 125: Address already in use
[ 19:03:05 ] [ Phoenix ] Setting Parity to: EVEN
[ 19:03:05 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 19:03:05 ] [ Phoenix ] Setting Baud to standard 9600
[ 19:03:05 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0
[ 19:03:07 ] [ ATR ] T=0 1etu=13.02us Guardtime:15etu WWT:76800etu
[ 19:03:07 ] [ ATR ] Historical bytes: 3 [B0] [10] i [FF] J P p [00] [00] [00] [00] [00] [00] [00]
[ 19:03:07 ] [ Loader ] Init NDS card
[ 19:03:07 ] [ Phoenix ] Setting Parity to: ODD
[ 19:03:07 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 19:03:07 ] [ Phoenix ] Setting Baud to custom 76800
[ 19:03:58 ] [ KeymaN ] Adding key 000000fbffffff type 0 on Provider 000000 for caid FBFB ID=0
[ 19:03:58 ] [ KeymaN ] Adding key 000000fbffff00 type 1 on Provider 000000 for caid FBFB ID=0
Last edited by johan; 21-01-2011 at 08:04 PM.
Same is happening to me.
If i manually mount the second map i have a segfault error (segmentation fault).
Only one map at a time.
Bye,
Someone figured out already how to stop the fan, its an annoying thing that fan.
Tia
Posting Permissions
Reply With Quote
Bookmarks