Enigma 2 by The_ripper - TEST -

[crazy2]

AzBox Premium enigma2 1.0.2 ripper test
some bug HD channels
Wireless ok
Online software update ok.
XVİD.avi ok.
1920x1080p 24p dts mkv ok.
Subtitle ok.
ts not working.
Media Player on TV speed.
Channel scan ok.
USALS Motor ok.

[richy18]

tryed to change the resolution to 1080i60,1080i50,720p60 and 720p50 but always a very bad picture quality.

Do you have tried 1080p60? As I described the HD Quality for me is amazing with my hardware.

[moding]

Do you have tried 1080p60? As I described the HD Quality for me is amazing with my hardware.

no, i couldn't try that one out, because unfortunetly i don't have a full HD tv... with 1080p60 i get "not supported resolution" or something similar on my TV

[T0rca1950]

@MickeySa

Will some fixes appear soon for this version or should we downgrade to last one?

[dvlajkovic]

I'd like to ask all beta-testers to spare us from their private decisions (i.e. "I'm going back to firmware xyz") and focus on test results only. Thank you!

[moicas3004]

@MickeySa

Will some fixes appear soon for this version or should we downgrade to last one?

Yes, that's my question also.

When will we know that the software update is available for us?

I have tryed but i think the download was from dreambox server ( 2 updates ).

For the rest, the TV image is great in SD and in HD.

Mediaplayer has some issues yet like some MKV block ( Avatar 1080P DTS 14Gbytes ). This file blocks and when i return to tv, the movies stops and restarts in a loop

PS: The TV is the most stable so far. Good job guys.

[moding]

root@AZBox:/usr/camd# newcs &
root@AZBox:/usr/camd# This is NewCS 1.65 - the New CardServer by the Butter-team..
Compiled on Jan 19 2009 at 17:55:24
Reading Config file from /var/tuxbox/config/newcs.xml
[ 22:53:46 ] [ Box detect ] Box type 1 (General Boxtype - PC compatible)
[ 22:53:46 ] [ Config ] Option <blockc0> for device 0 (lower) not present, defaulting to NO
[ 22:53:46 ] [ Config ] Option <Seca-PPV> for device 0 (lower) not present, defaulting to NO
[ 22:53:46 ] [ Config ] Pincode for device 0 (lower): 0000
[ 22:53:46 ] [ Config ] /dev/sci0 ECM priority: round
[ 22:53:46 ] [ Config ] Option <cache> not present, defaulting EMM: 20, ECM: Dynamic
[ NewCS ] Process ID is: 2019
[ 22:53:46 ] [ NewCS ] Ready to GO!



and also with newcs 1.67 rc1


root@AZBox:/usr/camd# newcs &
[2]- Done(1) newcs
root@AZBox:/usr/camd# This is NewCS 1.67 RC1 [Build: 95] - the New CardServer by the Butter-team..
Compiled on Jul 14 2009 at 1153
Reading Config file from /var/tuxbox/config/newcs.xml
[ 23:19:00 ] [ Box detect ] Box type 15 (Azbox)
[ 23:19:00 ] [ Config ] Option <blockc0> for device 0 (upper) not present, defaulting to NO
[ 23:19:00 ] [ Config ] Option <Seca-PPV> for device 0 (upper) not present, defaulting to NO
[ 23:19:00 ] [ Config ] Pincode for device 0 (upper): 0000
[ 23:19:00 ] [ Config ] /dev/sci0 ECM priority: round
[ 23:19:00 ] [ Config ] Option <cache> not present, defaulting EMM: 20, ECM: Dynamic
[ NewCS ] Process ID is: 1941
[ 23:19:00 ] [ NewCS ] Ready to GO!



and here oscam:

2010/12/01 23:15:21 2AAC8B60 s cccam: disabled
2010/12/01 23:15:21 2AAC8B60 s radegast: disabled
2010/12/01 23:15:21 2AAC8B60 s http thread started
2010/12/01 23:15:21 2AAC8B60 s creating thread for device /dev/sci0 slot 0
2010/12/01 23:15:21 2AAC8B60 s waiting for local card init
2010/12/01 23:15:21 2B51B4B0 h HTTP Server listening on port 88
2010/12/01 23:15:21 2BD1B4B0 r reader thread started (thread=2BD1B4B0, device=/dev/sci0, detect=cd, mhz=600, cardmhz=368)
2010/12/01 23:15:21 2BD1B4B0 r ERROR opening device /dev/sci0
2010/12/01 23:15:21 2BD1B4B0 r Cannot open device: /dev/sci0
2010/12/01 23:15:24 2AAC8B60 s init for all local cards done
2010/12/01 23:15:24 2AAC8B60 s anti cascading disabled

[moding]

I'd like to ask all beta-testers to spare us from their private decisions (i.e. "I'm going back to firmware xyz") and focus on test results only. Thank you!

and i would like to ask YOU to spare us from your USELESS comments...thank you!

[moicas3004]

root@AZBox:/usr/camd# newcs &
root@AZBox:/usr/camd# This is NewCS 1.65 - the New CardServer by the Butter-team..
Compiled on Jan 19 2009 at 17:55:24
Reading Config file from /var/tuxbox/config/newcs.xml
[ 22:53:46 ] [ Box detect ] Box type 1 (General Boxtype - PC compatible)
[ 22:53:46 ] [ Config ] Option <blockc0> for device 0 (lower) not present, defaulting to NO
[ 22:53:46 ] [ Config ] Option <Seca-PPV> for device 0 (lower) not present, defaulting to NO
[ 22:53:46 ] [ Config ] Pincode for device 0 (lower): 0000
[ 22:53:46 ] [ Config ] /dev/sci0 ECM priority: round
[ 22:53:46 ] [ Config ] Option <cache> not present, defaulting EMM: 20, ECM: Dynamic
[ NewCS ] Process ID is: 2019
[ 22:53:46 ] [ NewCS ] Ready to GO!



and also with newcs 1.67 rc1


root@AZBox:/usr/camd# newcs &
[2]- Done(1) newcs
root@AZBox:/usr/camd# This is NewCS 1.67 RC1 [Build: 95] - the New CardServer by the Butter-team..
Compiled on Jul 14 2009 at 1153
Reading Config file from /var/tuxbox/config/newcs.xml
[ 23:19:00 ] [ Box detect ] Box type 15 (Azbox)
[ 23:19:00 ] [ Config ] Option <blockc0> for device 0 (upper) not present, defaulting to NO
[ 23:19:00 ] [ Config ] Option <Seca-PPV> for device 0 (upper) not present, defaulting to NO
[ 23:19:00 ] [ Config ] Pincode for device 0 (upper): 0000
[ 23:19:00 ] [ Config ] /dev/sci0 ECM priority: round
[ 23:19:00 ] [ Config ] Option <cache> not present, defaulting EMM: 20, ECM: Dynamic
[ NewCS ] Process ID is: 1941
[ 23:19:00 ] [ NewCS ] Ready to GO!



and here oscam:

2010/12/01 23:15:21 2AAC8B60 s cccam: disabled
2010/12/01 23:15:21 2AAC8B60 s radegast: disabled
2010/12/01 23:15:21 2AAC8B60 s http thread started
2010/12/01 23:15:21 2AAC8B60 s creating thread for device /dev/sci0 slot 0
2010/12/01 23:15:21 2AAC8B60 s waiting for local card init
2010/12/01 23:15:21 2B51B4B0 h HTTP Server listening on port 88
2010/12/01 23:15:21 2BD1B4B0 r reader thread started (thread=2BD1B4B0, device=/dev/sci0, detect=cd, mhz=600, cardmhz=368)
2010/12/01 23:15:21 2BD1B4B0 r ERROR opening device /dev/sci0
2010/12/01 23:15:21 2BD1B4B0 r Cannot open device: /dev/sci0
2010/12/01 23:15:24 2AAC8B60 s init for all local cards done
2010/12/01 23:15:24 2AAC8B60 s anti cascading disabled

CCCam direct, it works?

[hfmls]

moicas also no.

just my 2 cents, it's really strange some users have amazing image quality (like me) and other users say it's terrible, i hope The_Ripper knows what is happening, otherwise, this is a strange bug

[triplexxx]

how to change to 1080p via FTP

[amyren]

I want to install cccam onto this image can anyone direct me where to install the files

Copy these two files by ftp to root on flash or to the root of your hdd.
Then install them from the menu, setup/software management/ install local extension.
Reboot and from find the userscript plugin and start cccam from there. From the same menu you will also have an option to set cccam to autostart.

Now you should have cccam running. All you need to do now is to create a CCcam.cfg file with a text editor and put it into /etc
example of a minimum CCcam.cfg file could look like:

C: 192.168.1.124 12000 username password no { 0:0:2 }

[moding]

how to change to 1080p via FTP

ftp to your box and go to folder:

/etc/init.d

then copy the file with name: bootup

to your pc. open it with unix compatible editor (i use editpad lite - freeware) and edit this :

insmod /lib/modules/2.6.22.19-19-the_ripper/extra/em8634dvb.ko options="-analog -f PAL_BG -digital -f HDMI_1080i50 -hdmi_chip $hdmichip 0 14 15 100 0"

to what you like....

[moding]

the problem with the "bad picture" quality on some boxes is recognized and confirmed from one RTI team member. The MotionAdaptative deinterlace is added to this BETA and obviously is causes problems on some TV models. In the next image , the team will include an option to turn on or off the deinterlace filter...

then we all will be able to see the "new picture quality"

[hfmls]

But this new picture quality we're talking about is only because of MotionAdaptive deinterlace, if that is off, quality would be the same as before right?

[Blackie]

root@AZBox:/usr/camd# newcs &
root@AZBox:/usr/camd# This is NewCS 1.65 - the New CardServer by the Butter-team..
Compiled on Jan 19 2009 at 17:55:24
Reading Config file from /var/tuxbox/config/newcs.xml
[ 22:53:46 ] [ Box detect ] Box type 1 (General Boxtype - PC compatible)
[ 22:53:46 ] [ Config ] Option <blockc0> for device 0 (lower) not present, defaulting to NO
[ 22:53:46 ] [ Config ] Option <Seca-PPV> for device 0 (lower) not present, defaulting to NO
[ 22:53:46 ] [ Config ] Pincode for device 0 (lower): 0000
[ 22:53:46 ] [ Config ] /dev/sci0 ECM priority: round
[ 22:53:46 ] [ Config ] Option <cache> not present, defaulting EMM: 20, ECM: Dynamic
[ NewCS ] Process ID is: 2019
[ 22:53:46 ] [ NewCS ] Ready to GO!



and also with newcs 1.67 rc1


root@AZBox:/usr/camd# newcs &
[2]- Done(1) newcs
root@AZBox:/usr/camd# This is NewCS 1.67 RC1 [Build: 95] - the New CardServer by the Butter-team..
Compiled on Jul 14 2009 at 1153
Reading Config file from /var/tuxbox/config/newcs.xml
[ 23:19:00 ] [ Box detect ] Box type 15 (Azbox)
[ 23:19:00 ] [ Config ] Option <blockc0> for device 0 (upper) not present, defaulting to NO
[ 23:19:00 ] [ Config ] Option <Seca-PPV> for device 0 (upper) not present, defaulting to NO
[ 23:19:00 ] [ Config ] Pincode for device 0 (upper): 0000
[ 23:19:00 ] [ Config ] /dev/sci0 ECM priority: round
[ 23:19:00 ] [ Config ] Option <cache> not present, defaulting EMM: 20, ECM: Dynamic
[ NewCS ] Process ID is: 1941
[ 23:19:00 ] [ NewCS ] Ready to GO!



and here oscam:

2010/12/01 23:15:21 2AAC8B60 s cccam: disabled
2010/12/01 23:15:21 2AAC8B60 s radegast: disabled
2010/12/01 23:15:21 2AAC8B60 s http thread started
2010/12/01 23:15:21 2AAC8B60 s creating thread for device /dev/sci0 slot 0
2010/12/01 23:15:21 2AAC8B60 s waiting for local card init
2010/12/01 23:15:21 2B51B4B0 h HTTP Server listening on port 88
2010/12/01 23:15:21 2BD1B4B0 r reader thread started (thread=2BD1B4B0, device=/dev/sci0, detect=cd, mhz=600, cardmhz=368)
2010/12/01 23:15:21 2BD1B4B0 r ERROR opening device /dev/sci0
2010/12/01 23:15:21 2BD1B4B0 r Cannot open device: /dev/sci0
2010/12/01 23:15:24 2AAC8B60 s init for all local cards done
2010/12/01 23:15:24 2AAC8B60 s anti cascading disabled

Does it mean that newcs server is working with internal cardreader?

[triplexxx]

to mi skyde hd not good quality
cccam ok
sd ok
for moment

[hfmls]

Does it mean that newcs server is working with internal cardreader?

no, no reader is working.

[T0rca1950]

moicas also no.

just my 2 cents, it's really strange some users have amazing image quality (like me) and other users say it's terrible, i hope The_Ripper knows what is happening, otherwise, this is a strange bug

If you have access to Sly IT on 13E please test the picture on some HD channels and than report... (It's very bad quality on my AZBox)

[hfmls]

If you have access to Sly IT on 13E please test the picture on some HD channels and than report... (It's very bad quality on my AZBox)

I only use hispasat 30w