Enigma 2 by The_ripper - TEST -

[Abdul1508]

@all

Ultra driver finished and working.

Probably today v1.0.31

Elite/Premium/Premium+/Ultra - All working edition

just for curiosity will azbox home media center also supported.

[kasukabe]

does it have the standby button working already?

ty in advance.

No. Not working.

[jamesjay]

@jamesjay
You can install E2 , but on E2 start it will failed on Nim manager python script because tuner driver isnt there and E2 will start looping and yes you can back on original FW with Azup like elite/premium users can.

I am still stuck and cannot go back to original firmware or load latest E2 for premium plus, I have tried reverting back using Back to Original Firmware from the first page, but keep getting "update not found" when I telnet the command:

OpenDreambox 1.5.0 AZBox

AZBox login: root
root@AZBox:~# ./update /MMP/backup_kernel
-sh: ./update: not found
root@AZBox:~#

I don't get a IP address on reboot so cannot use Azup either although I do know the IP address of the box but if I put this in and try to update I get the message "no rescue mode!!!" "put patch bin on your USB stick reboot AZbox and then try again"

Anyone had the same messages and can offer advice please...thanks.

James.

[[0_o]]

The RF modulator works but you can't change the frequency for the moment. You will find the channel used if you do a search (it's way up in the freq band).

//T33

Thanks about this info. Maybe if you define a different freq. for RF modulator on original firmware, you can use that setup in E2 when you load it.
I mean, a example: if you put RF modulator working at ch34 on original firmware, when you change for E2 RF modulator should be working at ch34 too (I think!).

If you can test it next time you change your firmware, I'm very thankful (I cant test my Azbox because I'm far from home).

Regards

[T33]

Thanks about this info. Maybe if you define a different freq. for RF modulator on original firmware, you can use that setup in E2 when you load it.
I mean, a example: if you put RF modulator working at ch34 on original firmware, when you change for E2 RF modulator should be working at ch34 too (I think!).

If you can test it next time you change your firmware, I'm very thankful (I cant test my Azbox because I'm far from home).

Regards

Sorry, don't think so since I had mine at another channel before the upgrade and now I can receive it on the far edge of what my TV can handle.

[[0_o]]

Sorry, don't think so since I had mine at another channel before the upgrade and now I can receive it on the far edge of what my TV can handle.

Oh ok. If its working, should be a simple thing to fix (I promuse).

[**esp**]

I am still stuck and cannot go back to original firmware or load latest E2 for premium plus,

What actually happens when you do this:-

Use any original firmware patch.bin file in the USB

If you leave the USB stick in the Azbox with the patch.bin file and reboot, it should boot in Rescue mode and display the IP address of your box in the VFD.


Then you can use AZUP.

[pr2]

I am still stuck and cannot go back to original firmware or load latest E2 for premium plus, I have tried reverting back using Back to Original Firmware from the first page, but keep getting "update not found" when I telnet the command:

OpenDreambox 1.5.0 AZBox

AZBox login: root
root@AZBox:~# ./update /MMP/backup_kernel
-sh: ./update: not found
root@AZBox:~#

I don't get a IP address on reboot so cannot use Azup either although I do know the IP address of the box but if I put this in and try to update I get the message "no rescue mode!!!" "put patch bin on your USB stick reboot AZbox and then try again"

Anyone had the same messages and can offer advice please...thanks.

James.

Hello,

You are not in rescue mode, you are in normal E2 mode.
Simply insert a USB stick with "patch.bin" not "azbox-0.9.5020-patch.bin" and reboot.
So at boot rescue mode will search for and detect "patch.bin", then you will see the IP in the VFD, start Azup.exe on your PC and complete the IP address and press update.

Pr2

[pr2]

@pingflood

Here they are, compiled by the_ripper :

usbhid.ko

usbkbd.ko

usbmouse.ko

Hi,

Can we then have loadkeys to allow keyboard layout change.

Thanks,

Pr2

[pingflood]

Are you going to try and get Qtbrowser to run?

Yes. Thats where I'll focus for now.

Thanks @The_Ripper and @MickeySa for the modules. Soon I should start the testings. :respect-054:

[rsl123]

@pingflood

Here they are, compiled by the_ripper :

usbhid.ko

usbkbd.ko

usbmouse.ko

To use usb keyboard and mouse there is one kernel module missing: uhci-hcd.ko

Needed modules are: hid.ko uhci-hcd.ko usbhid.ko usbkbd.ko usbmouse.ko

I've compiled uhci-hcd.ko. The mouse is working in Qt Webbrowser. The keyboard is recognized but not working.

Maybe, my module is not 100% compatible to the_rippers kernel!

* modules compiled by the_ripper + uhci-hcd.ko

http://hotfile.com/dl/79814413/5062d...dules.zip.html

* copy the 'misc' folder to '/lib/modules/2.6.22.19-19-the_ripper/kernel/'
* make

depmod -a

* reboot the box with connected mouse/keyboard
* all usb devices are listed in

cat /proc/bus/usb/devices

someone is able to use the keyboard?

[The_Ripper]

I attached uhci-hcd.ko module

[onzifonzi]

@The_Ripper

Could you build cifs module if you have some time?
I have not big USB flash to play movie on E2 AzBox without this module :(

Thank you in advance!

I'm glad to see E2 get better and better with every new build!
Good luck

[jojo10]

maybe this one helps

[The_Ripper]

@onzifonzi
CIFS is allready enabled inside kernel.

[onzifonzi]

@onzifonzi
CIFS is allready enabled inside kernel.

Ohh thanks ...
I'm a stupid guy

Here is syntax for mount windows share:
mount -t cifs \\\\IPofWINDOWS\\sharename /media/net -o username=user,pass=password

But is there any issue with MP? I'm seeing black screen and no sound when play(green button) avi file from mounted share :(

[kevinch9]

mount - t cifs.....
invalidad argument

[onzifonzi]

mount - t cifs.....
invalidad argument

Try exactly what I wrote just replace IPofWINDOWS and share ...

It works !

[kevinch9]

Try exactly what I wrote just replace IPofWINDOWS and share ...

It works !

with 4 \\\\?
OMG

[onzifonzi]

with 4 \\\\?
OMG

YES \\\\ before IP and \\ before share