Thanks for this great job.

I didn't follow all the thread but i tought that we must connect the Azbox by ethernet and not by wireless to recover an opensat firmware when using Azup.

Could someone can confirm if it's still necessary, it's not wrote in the readme file and could be usefull for some newbs like me.

5. If You tested enough Enigma 2 on AzBox HD Device and want to be back on AzBox Official Firmware, it is piece of cake
6. Load on FAT32 Formatted USB Memory stick patch.bin ( Official AzBox HD Firmware e.g 0.9.5020 ) .
7. Turn Off AzBox HD Device, put USB Memory stick in Receiver, and Turn it on.
8. On VFD You will see RESCUE MODE and IP Address will be listed.