JSC_Sports_On_Technomate

[Weston Calling]

Was working fine yesterday now i got" portcom error",im using windows 7 checked settings in device manager im on comm1,any body else had this problem? I did have a go at getting Bullsat earlier in the V PLUG earlier would this hacve anything to do with it.

It's working fine on my TM1000ci right now with XP. I guess you might have changed something when you tried vplug, but if you unzip the folder from scratch, I would think you'd be fine.

Weston Calling

[Disco Man]

Hi folks,
Just confirming that jsc works fine

thanks

[charlie]

Thanks for reply don,t think its Compass software, tried unistalling driver all ok in device manager sayingeverything working ok, i could have a conflict with another device in comm port 1, is there a way to check which device is on it?

[charlie]

JSC working fine with Compass upload dated 08/07/2010, think one of the family had not allowed access when prompted by the firewall so had to reconfigure my computer, also can i thank Giga for all his efforts as his posts was very helpfull also to Compass for all his hard work at deleivering these files

[Plessy]

Just to add my penny farthing to this thread,

For the First Time I tried this today and after a bit of cable testing and reading ,

Wow ! Fantastic! :respect-051:

Thanks Again Compass !

And a lot easier to use than Diablo i.e (configuring)

Watching Bullsat at the moment wonderful stuff...

Many Thanks !:cheers2:


Plessy

[limerick]

Hi
I have JSC working ok but cant get Bulsat to clear.


using SSSP & Null Modem cable connected to receiver
Save & unpack the attachment

1. run CILQUER ICI
2. open folder SBCL_ vpulg
3. run SBCL v1.0i
4. check to see if vplug is active (ticked)
I am doing as above but cant clear any scrambled channel .What channel's should I be able to clear?and what am I doing wrong,would appreciate any help.Below is what's shown in vplug 2.4.3 monitor

[19/07/2004 22:50:57] SBCL v1.0i:SBCL - StartECM_Filt-> $00FF
[19/07/2004 22:51:20] SBCL v1.0i:SBCL - EMM Pid =$0500, SID =$002E
[19/07/2004 22:51:20] SBCL v1.0i:SBCL - Timeout… This PID is empty. Rescan...
[19/07/2004 22:58:58] SBCL v1.0i:SBCL - AutoEmm: ProviderID,CurChCAID : 060400,0604
[19/07/2004 22:58:58] SBCL v1.0i:SBCL - EMM-CA: Standarized systems
[19/07/2004 22:58:58] SBCL v1.0i:SBCL - Unknown EMM structure
[19/07/2004 2258] SBCL v1.0i:SBCL - EMM Pid =$0500, SID =$002E
[19/07/2004 2258] SBCL v1.0i:SBCL - Timeout… This PID is empty. Rescan...

regards
limerick

[Giga]

KoS package:

http://en.*********.net/pack-bulsatcom.php

[gibson]

Is this method of clearing still working please. Thankyou and

Best wishes from,

Gibson.

[Garf]

Is this method of clearing still working please. Thankyou and

Best wishes from,

Gibson.

Just discovered this today so gave it a try. Working on TM1500CI+ using files in post 240. :hurray:

[gibson]

So it is Garf, thankyou.

Best wishes from,

Gibson.

[Plessy]

Just wondering if JSC Sports on 13'E + Bulsat on 39'E is clearing for anyone using CILQUER ICI.exe +VPLUG ?

Tried yesterday + today but just getting Scrambled Channels.... is there something that I have missed i.e. updated software or are they down ?

Thanks.

Plessy.

[titus]

just tried jsc not working for me,

[Plessy]

just tried jsc not working for me,

Thanks Titus:respect-048:

I wont go fiddling with anything just yet as I am obviously not alone on this one......


Plessy

[Giga]

hope ^^COMPASS^^ updates this solution soon for you lot.

[holmroad]

hope ^^COMPASS^^ updates this solution soon for you lot.

Think Compass is on holiday mate!!:respect-067:

[Giga]

without his laptop and usb modem? that would be odd, him not passing by?

[holmroad]

without his laptop and usb modem? that would be odd, him not passing by?

Yes but we havent heard anything from him since he posted he was off for a while, so maybe he hasnt taken his lappie THIS time?

[scotty111111]

have you guys tried fausto 1.45 emulator for bulsat ? you can use diablo keybin updates and even put new key into emulator manually - as for jsc i have problems with way tm1500 reads caids - i can open some channels using an old patch dated 100807 for caids reading and an update i found for humax - if allowed i will post it

[CBo]

good thing this. JSC should mean something to watch for next season maybe! Excellent work compass updating this for us poor technomate owners

[Weston Calling]

I couldn't get them to open yesterday, but right now JSC sports channels are opening fine on my TM1000ci with just CILQUER in Bulsat_39E,JSC,Sct13°E,08-07-2010_by_Compass.

Weston Calling