Enigma 2 by The_ripper - TEST -

[tx0]

What file? All files are uploaded in this thread.

haven't noticed the links below. Have you tried it? How is it?

[digihoe]

haven't noticed the links below. Have you tried it? How is it?

No I have yet to try it.

[freshmaker]

you have in atach
Premium Plus E2.rar (44.70 MB, 50 views)

[oguzhak]

please help me ...please...my box is not running still....
tell me a way for solve...

[wullieb25]

how do i solve this guys im stuck with a box that i cant do anything with.

the new e2 is still on the dom but i have no internet access so i cant connect to it to revert back to the origional so im stuck with a box that i cant do nothing with

[sattommy]

how do i solve this guys im stuck with a box that i cant do anything with.

the new e2 is still on the dom but i have no internet access so i cant connect to it to revert back to the origional so im stuck with a box that i cant do nothing with

get a rs232 cable, connect and invoke a net init & net up in yamon. This solved my problems. had internet since then even after i unplug the power for a while.

[wullieb25]

thanks m8 i have an rs232 cable but there's no connection on the box for it

[sattommy]

thanks m8 i have an rs232 cable but there's no connection on the box for it

You need an rs232 to ttl converter like an old nokia cable. There is some thread explaining on this forum

[wullieb25]

thanks m8 i've found the thread al need to buy the ttl converter to get this up and running again so once connected by serial do i need to transfer any files if so which ones

[PsiDOC]

thanks m8 i have an rs232 cable but there's no connection on the box for it

You also need an RS232 to TTL interface as well as the Reciever works on 3 - 5 volts and RS232 is +/-12 volts so the all you'll read on boot is garbage without it as the signal levels are too low. They're available on the 'bay cheaply or you can build one youself using a MAX232 chip and a few capacitors.

The connections inside the AZBox for the rs232 are below.



Picture gratuitiously pogged from This Thread!

Psi

[wullieb25]

thanks very much for your help guys would this do the job

h**p://cgi.eb*y.co.uk/RS232-TTL-converter-MAX232-/270603231174?cmd=ViewItem&pt=UK_B OI_Electrical_Components_Supplies _ET&hash=item3f01359fc6

[kanber_kav]

please help me ...please...my box is not running still....
tell me a way for solve...

cihazı düzeltemedinmi.

[digihoe]

You need an rs232 to ttl converter like an old nokia cable. There is some thread explaining on this forum

Or the old season interface.

[moicas3004]

@all
For all people who got stuck just in BOOTING in vfd display, box isnt dead, but to back in original state there is 2 more posible ways:
1. Is serial cable and hardware interface to hook up to receiver board, user "telesat" put schematic diagram here on forum, just search it ...
2. Is to remove DOM from receiver/board and hook it up to external IDE rack. "telesat" is writing right now some tutorial because power connection isnt the same, so it will need some explanation what to do about that, plus he will upload what to put in DOM and with what partition app. So pls stay tuned .

If this 2 posibility is hard for someone, then unfortunately there is no other way, I can just apologize to everyone and to ashure that their receiver isnt damaged in terms of hardware.

---------
I added now in new kernel build initramfs root filesystem, so if needed rescue shell it will enable ftp/telnet and show you your IP address from dhcp app on VFD so backup original FW will not be the problem any more.

1 - You dont have to apologize to anyone, because in this topic it already says that this firmware is very beta and only for test. Only tests who whats to doit at their own risk.

2 - I just love your dedication to this reciver, first with Mbox and now with this enigma FW.

3 - I think you, and the guys who are helping, to create a svn, or an svn tracker, like OSCAM to anyone who wants to help to get their hands on the job. Other team just dont want to help because there is no GPL, or SVN to pick up and help you guys.

Continue the good work.

PS: I have a FW with a diferent version postes in another site E2 1.0.8. Is this a real file from you guys , because the version you have lunched was E2 1.0.7.

[MickeySa]

I can confirm, only one version, which is real and public is 1.0.7 .

Cheers

[moicas3004]

I can confirm, only one version, which is real and public is 1.0.7 .

Cheers

OK thanks. So version E2 1.0.8 Is a FAKE.

ATTENTION GUYS do not use it. Version posted on another site as Patch_4973.bin is a FAKE.

[halabessa]

Hi Guys,

Found this on another forum.... thanks to "erminio"..... & translated by google

"GUIDE FOR RESTORING FIRMWARE ORIGINAL BY CUS2K (TechSat-forum)
attached files
- Update
- Backup_kernel
copy "update" in / tmp (set to 755)
copy "backup_kernel" in / MMP
telnet
type: cd / tmp
in tmp, type:. / update / MMP / backup_kernel
and the decoder are restoring the preparation to receive the file from usb patch.bin (with firmware az or more E2)

HOPE it can help:bravo-009:

[buyukbang]

Completely agree.

@Ripper ,

Thanks for your great job and dedication ! Waiting good news from you and other friends working on E2 !

1 - You dont have to apologize to anyone, because in this topic it already says that this firmware is very beta and only for test. Only tests who whats to doit at their own risk.

2 - I just love your dedication to this reciver, first with Mbox and now with this enigma FW.

3 - I think you, and the guys who are helping, to create a svn, or an svn tracker, like OSCAM to anyone who wants to help to get their hands on the job. Other team just dont want to help because there is no GPL, or SVN to pick up and help you guys.

Continue the good work.

PS: I have a FW with a diferent version postes in another site E2 1.0.8. Is this a real file from you guys , because the version you have lunched was E2 1.0.7.

[single]

Off topic:

@ADM & MODS

Can you please move post from "(How to) RESTORING E2 FIRMWARE TO ORIGINAL" sub for other post with same name?

Thanks in adv

Back to this post...

About i2c @Ripper can you add to kernel config:

set to Y:
CONFIG_I2C_DEBUG_CORE
CONFIG_I2C_DEBUG_ALGO
CONFIG_I2C_DEBUG_BUS
CONFIG_I2C_DEBUG_CHIP

and please put output here, tk's.

About USB I think you froget to add:
CONFIG_USB_DEVICE_CLASS=y

:respect-013:

[The_Ripper]

@single
It will be activated in next test ...