Enigma 2 by The_ripper - TEST -

**hfmls** · 13-07-2010, 05:32 AM

hmm, i didn't get any telnet/ftp access too, besides after reboot, it just stays in 100% and black screen, i only get GUI first time.

just a question.....now what?

edit: after a restart i got ftp and telnet access but now i have blackscreen and 100% showing up, nothing happens.
before i got this problem, i went to network configuration in enigma2 and used manual ip, netmask and gateway, i dunno if this helped...but it's working.

**hfmls** · 13-07-2010, 05:39 AM

OpenDreambox 1.5.0 AZBox

AZBox login: root
root@AZBox:~# cd ..
root@AZBox:/home# cd ..
root@AZBox:/# ls
MMP bin dev hdd lib mnt sbin sys usr
autofs boot etc home media proc share tmp var
root@AZBox:/# cd var
root@AZBox:/var# ls
backups cache lib lock run spool tuxbox
bin etc local log share tmp
root@AZBox:/var# cd bin
root@AZBox:/var/bin# ls
CCcam.mipsel
root@AZBox:/var/bin# ./CCcam.mipsel -dv
01

26.572 CCcam: ================================= =========================== ==========
01

26.575 CCcam: starting CCcam 2.1.3 compiled on Nov 14 2009@00:37:55
01

26.576 CCcam: ================================= =========================== ==========
01

26.578 CCcam: online using nodeId 9c238883455b26f0
01

26.582 CCcam: read config: cannot open /var/etc/CCcam.cfg or not found
0126.584 CCcam: DM7025 detected
01

26.585 CCcam: create 8 cam device(s)
01

26.828 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
01

26.829 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
01

26.830 CCcam: static cw not found or bad
01

26.831 CCcam: parsed 0 entries from /var/etc/CCcam.prio
01

26.831 CCcam: readProviderfile: cannot open /var/etc/CCcam.providers or no t found
01

26.832 CCcam: readChannelList: cannot open /var/etc/CCcam.channelinfo or n ot found
01

26.833 CCcam: server started on port 12000

muahhaha

**hfmls** · 13-07-2010, 05:51 AM

back to original firmware progress:
pls fix paths in first post MickeySA

e have to ./tmp/update

AZBox login: root
root@AZBox:~# cd ..
root@AZBox:/home# cd ..
root@AZBox:/# cd ..
root@AZBox:/# cd MMP/
root@AZBox:/MMP# ls
backup_kernel gdb strace
fb_test set_outports tmp
root@AZBox:/MMP# cd ..
root@AZBox:/# ./update /MMP/backup_kernel
-sh: ./update: not found
root@AZBox:/# ./tmp/update /MMP/backup_kernel
INFILE: /MMP/backup_kernel, OUTFILE:/dev/mtdblock4
Progress 0
Progress 1
Progress 2
Progress 3
Progress 4
Progress 5
Progress 6
Progress 7
Progress 8
Progress 9
Progress 10
Progress 11
Progress 12
Progress 13
Progress 14
Progress 15
Progress 16
Progress 17
Progress 18
Progress 19
Progress 20
Progress 21
Progress 22
Progress 23
Progress 24
Progress 25
Progress 26
Progress 27
Progress 28
Progress 29
Progress 30
Progress 31
Progress 32
Progress 33
Progress 34
Progress 35
Progress 36
Progress 37
Progress 38
Progress 39
Progress 40
Progress 41
Progress 42
Progress 43
Progress 44
Progress 45
Progress 46
Progress 47
Progress 48
Progress 49
Progress 50
Progress 51
Progress 52
Progress 53
Progress 54
Progress 55
Progress 56
Progress 57
Progress 58
Progress 59
Progress 60
Progress 61
Progress 62
Progress 63
Progress 64
Progress 65
Progress 66
Progress 67
Progress 68
Progress 69
Progress 70
Progress 71
Progress 72
Progress 73
Progress 74
Progress 75
Progress 76
Progress 77
Progress 78
Progress 79
Progress 80
Progress 81
Progress 82
Progress 83
Progress 84
Progress 85
Progress 86
Progress 87
Progress 88
Progress 89
Progress 90
Progress 91
Progress 92
Progress 93
Progress 94
Progress 95
Progress 96
Progress 97
Progress 98
Progress 99
Progress 100
HX_DD: 6656+0 records in
HX_DD: 6656+0 records out
Updating old kernel finished!
Rebooting...

Broadcast message from root (pts/1) (Sat Jan 1 01:23:32 2000):

The system is going down for reboot NOW!
root@AZBox:/#

**massimo1167** · 13-07-2010, 06:28 AM

A BIG thanks to The_Ripper for his work and MickeySa for his support to this project.

For who wants to build an E2 image I found this instruction written by Eagle from EDG forum.Thank Eagle!

The follow packages are needed:

monotone ( ver. 0.31)
zlib1g-dev
libc6-dev
gcc
g++
make
cvs
subversion
perl
phyton
phyton-dev
python-psyco
ccache
patch
m4
sed
bison
wget
bzip2
gawk
curl
sharutils
coreutils
docbook
openjade
quilt
flex
libmpfr-dev
libpcre3-dev
unzip
libboost
ssh
gettext
texinfo
tar
ncurses-bin
libncurses5-dev
pkg-config
fakeroot
libbost-dev
automake
autoconf
libpng12-dev
libpng12-o

use this script to verify package's version.

Code:

#! /bin/bash

CUT=`which cut`
GREP=`which grep`

echo ""
echo ""

### cvs ###
CVS=`which cvs`
if ( test -e $CVS ) then
	echo "cvs:                      "`$CVS --version | $GREP Concurrent | $CUT -f5 -d " "`
	else
	echo -e "\033[37;41mcvs nicht installiert\033[37;40m"
fi;

### autoconf >= 2.57a ###
AUTOCONF=`which autoconf`
if ( test -e $AUTOCONF ) then
	echo "autoconf >= 2.57a:        "`$AUTOCONF --version | $GREP "autoconf " | $CUT -f4 -d " "`
	else
	echo -e "\033[37;41mautoconf nicht installiert\033[37;40m"
fi;

### automake >= 1.7 ###
AUTOMAKE=`which automake`
if ( test -e  $AUTOMAKE ) then
	echo "automake >= 1.8:          "`$AUTOMAKE --version | $GREP "automake " | $CUT -f4 -d " "`
	else
	echo -e "\033[37;41mautomake nicht installiert\033[37;40m"
fi;

### libtool >= 1.4.2 ###
LIBTOOL=`which libtool`
if ( test -e $LIBTOOL ) then
	echo "libtool >= 1.4.2:         "`$LIBTOOL --version | $GREP "libtool)" | $CUT -f4 -d " "`
	else
	echo -e "\033[37;41mlibtool nicht installiert\033[37;40m"
fi;

### gettext >= 0.12.1 ###
GETTEXT=`which gettext`
if ( test -e $GETTEXT ) then
	echo "gettext >= 0.12.1:        "`$GETTEXT --version | $GREP gettext | $CUT -f4 -d " "`
	else
	echo -e "\033[37;41mgettext nicht installiert\033[37;40m"
fi;

### make >= 3.79 ###
MAKE=`which make`
if ( test -e $MAKE ) then
	echo "make >= 3.79:             "`$MAKE --version | $GREP Make | $CUT -f3 -d " "`
	else
	echo -e "\033[37;41mmake nicht installiert\033[37;40m"
fi;

### makeinfo (texinfo) ###
MAKEINFO=`which makeinfo`
if ( test -e $MAKEINFO ) then
	echo "makeinfo:                 "`$MAKEINFO --version | $GREP makeinfo | $CUT -f4 -d " "`
	else
	echo -e "\033[37;41mmakeinfo nicht installiert\033[37;40m"
fi;

### tar ###
TAR=`which tar`
if ( test -e $TAR ) then
	echo "tar:                      "`$TAR --version | $GREP tar | $CUT -f4 -d " "`
	else
	echo -e "\033[37;41mtar nicht installiert\033[37;40m"
fi;

### bunzip2 (bzip2) ###
BUNZIP2=`which bunzip2`
if ( test -e $BUNZIP2 ) then
	echo "bunzip2:                  "`bunzip2 --help 2> btmp; $GREP Version < btmp | $CUT -c 50-54; rm btmp`
	else
	echo -e "\033[37;41mbunzip2 nicht installiert\033[37;40m"
fi;

### gunzip (gzip) ###
GUNZIP=`which gunzip`
if ( test -e $GUNZIP ) then
	echo "gunzip:                   "`$GUNZIP --version | $GREP gunzip | $CUT -f2 -d " "`
	else
	echo -e "\033[37;41mgunzip nicht installiert\033[37;40m"
fi;

### patch ###
PATCH=`which patch`
if ( test -e $PATCH ) then
	echo "patch:                    "`$PATCH --version | $GREP "patch " | $CUT -f2 -d " "`
	else
	echo -e "\033[37;41mpatch nicht installiert\033[37;40m"
fi;

### infocmp (ncurses-bin / ncurses-devel) ###
INFOCMP=`which infocmp`
if ( test -e $INFOCMP ) then
	echo "infocmp:                  "`$INFOCMP -V | $GREP ncurses | $CUT -f2 -d " "`
	else
	echo -e "\033[37;41minfocmp nicht installiert\033[37;40m"
fi;

### gcc 2.95 or >= 3.0 ###
GCC=`which gcc`
if ( test -e $GCC ) then
	echo "gcc 2.95 or >= 3.0:       "`$GCC --version | $GREP gcc | $CUT -f3 -d " "`
	else
	echo -e "\033[37;41mgcc nicht installiert\033[37;40m"
fi;

### g++ 2.95 or >= 3.0 ###
CCC=`which g++`
if ( test -e $CCC ) then
	echo "g++ 2.95 or >= 3.0:       "`$CCC --version | $GREP g++ | $CUT -f3 -d " "`
	else
	echo -e "\033[37;41mg++ nicht installiert\033[37;40m"
fi;

### flex ###
FLEX=`which flex`
if ( test -e $FLEX ) then
	echo "flex:                     "`$FLEX --version | $GREP flex | $CUT -f2 -d " "`
	else
	echo -e "\033[37;41mflex nicht installiert\033[37;40m"
fi;

### bison ###
BISON=`which bison`
if ( test -e $BISON ) then
	echo "bison:                    "`$BISON --version | $GREP Bison | $CUT -f4 -d " "`
	else
	echo -e "\033[37;41mbison nicht installiert\033[37;40m"
fi;

### pkg-config ###
PKGCONFIG=`which pkg-config`
if ( test -e $PKGCONFIG ) then
	echo "pkg-config:               "`$PKGCONFIG --version | $GREP .`
	else
	echo -e "\033[37;41mpkg-config nicht installiert\033[37;40m"
fi;

### wget ###
WGET=`which wget`
if ( test -e $WGET ) then
	echo "wget:                     "`$WGET --version | $GREP Wget | $CUT -f3 -d " "`
	else
	echo -e "\033[37;41wget nicht installiert\033[37;40m"
fi;

echo ""
echo

Then create a new directory:
mkdir OpenDream2
cd OpenDream2

Copy Makefile-opendreambox-1.5 provided by The_Ripper into the previous directory, give the 755 right permission and execute the follow command:

make -f Makefile-opendreambox-1.5 image

At this point, starts the compilation and then download all the necessary packages, you may need to wait up to 2-3 hours (if all goes well!, But generally not good, because he finds many packages will be searched to hand in network and also when you give inexplicable errors, the compilation will be relaunched every time ..).

The finished image will be under ../OpenDream2/build/tmp/deploy/images/dreambox-image-dm800-yyyymmmddhhmmss.nfi

Apply the patches made by The_Ripper and build again.

**hfmls** · 13-07-2010, 06:34 AM

what about the interest thing? sourcecode
me and moicas are talking to pli admins, they maybe could have a look at it.

The_Ripper is that the help u wanted?
http://www.pli-images.org/forum/view...hread_id=14230

**oguzhak** · 13-07-2010, 07:15 AM

[QUOTE=hfmls;736173]back to original firmware progress:
pls fix paths in first post MickeySA

e have to ./tmp/update

AZBox login: root
root@AZBox:~# cd ..
root@AZBox:/home# cd ..
root@AZBox:/# cd ..
root@AZBox:/# cd MMP/
root@AZBox:/MMP# ls
backup_kernel gdb strace
fb_test set_outports tmp
root@AZBox:/MMP# cd ..
root@AZBox:/# ./update /MMP/backup_kernel
-sh: ./update: not found
root@AZBox:/# ./tmp/update /MMP/backup_kernel
INFILE: /MMP/backup_kernel, OUTFILE:/dev/mtdblock4
Progress 0
Progress 1
Progress 97
Progress 98
Progress 99
Progress 100
HX_DD: 6656+0 records in
HX_DD: 6656+0 records out
Updating old kernel finished!
Rebooting...

Broadcast message from root (pts/1) (Sat Jan 1 01:23:32 2000):

The system is going down for reboot NOW!
root@AZBox:/#[/QU
I've done all of these stages. ı think made mistake return to the original image from the e2 image . because receiver at the level of the receiver is booting always wonder what do I do. azbox dead

**SAUS04** · 13-07-2010, 07:21 AM

Fantastic work i will watch the progress with this with interest. as soon as we have a az E2 firmware working with no audio/video/demux/tuners support I will scrap openshats fws forever.

**hfmls** · 13-07-2010, 08:38 AM

[QUOTE=oguzhak;736181]

Originally Posted by hfmls

back to original firmware progress:
pls fix paths in first post MickeySA

e have to ./tmp/update

AZBox login: root
root@AZBox:~# cd ..
root@AZBox:/home# cd ..
root@AZBox:/# cd ..
root@AZBox:/# cd MMP/
root@AZBox:/MMP# ls
backup_kernel gdb strace
fb_test set_outports tmp
root@AZBox:/MMP# cd ..
root@AZBox:/# ./update /MMP/backup_kernel
-sh: ./update: not found
root@AZBox:/# ./tmp/update /MMP/backup_kernel
INFILE: /MMP/backup_kernel, OUTFILE:/dev/mtdblock4
Progress 0
Progress 1
Progress 97
Progress 98
Progress 99
Progress 100
HX_DD: 6656+0 records in
HX_DD: 6656+0 records out
Updating old kernel finished!
Rebooting...

Broadcast message from root (pts/1) (Sat Jan 1 01:23:32 2000):

The system is going down for reboot NOW!
root@AZBox:/#[/QU
I've done all of these stages. ı think made mistake return to the original image from the e2 image . because receiver at the level of the receiver is booting always wonder what do I do. azbox dead

what does it show in display?
do u get any image?

**oguzhak** · 13-07-2010, 09:20 AM

[QUOTE=hfmls;736189]

Originally Posted by oguzhak

what does it show in display?
do u get any image?

just BOOTING ....
Unfortunately I could not get the image.
receiver does not see to usb flash disc

**hfmls** · 13-07-2010, 09:39 AM

but this was after u aplied the update to get back to azbox firmware?

if u put azbox beta firmware in usb what does it happen?
explain a little more every step please

**tonybam** · 13-07-2010, 10:02 AM

[QUOTE=oguzhak;736181]

Originally Posted by hfmls

back to original firmware progress:
pls fix paths in first post MickeySA

e have to ./tmp/update

AZBox login: root
root@AZBox:~# cd ..
root@AZBox:/home# cd ..
root@AZBox:/# cd ..
root@AZBox:/# cd MMP/
root@AZBox:/MMP# ls
backup_kernel gdb strace
fb_test set_outports tmp
root@AZBox:/MMP# cd ..
root@AZBox:/# ./update /MMP/backup_kernel
-sh: ./update: not found
root@AZBox:/# ./tmp/update /MMP/backup_kernel
INFILE: /MMP/backup_kernel, OUTFILE:/dev/mtdblock4
Progress 0
Progress 1
Progress 97
Progress 98
Progress 99
Progress 100
HX_DD: 6656+0 records in
HX_DD: 6656+0 records out
Updating old kernel finished!
Rebooting...

Broadcast message from root (pts/1) (Sat Jan 1 01:23:32 2000):

The system is going down for reboot NOW!
root@AZBox:/#[/QU
I've done all of these stages. ı think made mistake return to the original image from the e2 image . because receiver at the level of the receiver is booting always wonder what do I do. azbox dead

Hi
Most probably as my self and others have this problem. and the flash or DOM is might corrupted and not easy to be solve except by serial interface.

**tonybam** · 13-07-2010, 10:03 AM

Originally Posted by hfmls

but this was after u aplied the update to get back to azbox firmware?

if u put azbox beta firmware in usb what does it happen?
explain a little more every step please

USB is not recognized

**primarijus** · 13-07-2010, 10:25 AM

Originally Posted by tonybam

USB is not recognized

try diferent USB

**hfmls** · 13-07-2010, 10:32 AM

format in fa**2

**single** · 13-07-2010, 02:36 PM

few questions if I made:

no sound no video == No drive for hdmi SiI9030CTU-7, or using one made by "sigma retail".

RF Modulator samsung not working (have no drive) ?

Anyone have full list of ic's/chips of this box....?

When compiling Kernel are any modulo compiled with?

well, just asking this:

What drives are now ready? If I may ask...

Personal note:
A few times ago I do a search about hardware of this box and like I already now things like avs, rf, and some others chips/ic's are not on kernel and need to be ported to linux-mips, or uclib, and because sigma don't use standard stuff(can't dasm), we are talking of made new drive to this "guys", aren't we, and when we don't have datasheet, what to do...like rf....(example)??

CU and best of luck, for all coders

:respect-055:

**crazy2** · 13-07-2010, 02:39 PM

Hadi e2 azcilere hayırlı olsun.Ben hala deneme şansım olmadı.Ev oldukca dağınık boya badana işleri.Görüyorumki bazı arkadaşlarda sıkıntı olmuş en iyisi ben denemeyeyim,üstat biliyorsun aksilikler hep benim başıma gelir. hehehe

**moicas3004** · 13-07-2010, 03:01 PM

@The_Ripper and Co.

I have tested 2 times and the biguest bug is that after 2 or 3 reboots the image in TV goes away. Stops apearing, the VFD shows a few times 60% - 100%, 80%-100%.

In my second install, i also been without conection to Network, but i manage to solve'it by introducin manualy the IP.

**kanber_kav** · 13-07-2010, 03:03 PM

Originally Posted by crazy2

Hadi e2 azcilere hayırlı olsun.Ben hala deneme şansım olmadı.Ev oldukca dağınık boya badana işleri.Görüyorumki bazı arkadaşlarda sıkıntı olmuş en iyisi ben denemeyeyim,üstat biliyorsun aksilikler hep benim başıma gelir. hehehe

Abicim sakın sendeneme.
Bu üçüncüsü olur yoksam.
bende denemedim. Şuan gerek görmüyorum zaten.