ORF HD working here on 19E
Change channel back and forward and then wait a few seconds.
ORF HD working here on 19E
Change channel back and forward and then wait a few seconds.
Not clears many hd channels easily,sometimes works sometimes not...
Maybe that's because of channel change time is too long ....
I hope this will sorted by the new fw also remember this one is the very first real cccam on Azbox so we should expect some tiny problems
Just to clear a little confusion for people,
What this is,
Real CCcam with a connection to the OpenXCAS API. Thanks to The_Ripper.
So all the features you get from the CCCam on dreambox you get on AZBox HD.
Multi Line
Auto Reconnect
Server
Softcam.key
This is not a port of CCcam.
CCcam on a dreambox works like this
CCcam <--> DVB Api
On AZBox
CCcam <-- Interceptor --> OpenXCAS
I think I will be buying The_Ripper a pint or two if we ever meet!
Easy now, he's too young for that sorta goings on...
thans to guys for there hard work:cheers2:
Maybe a better place could be \EMU\OpenXCAS\mgcamdchange it to, for example to /EMU/lib/ and then copy the softcam.key to the folder /EMU/lib/ on your AzBox HD
As the latest keys can be downloaded directly from the internet into the mgcamd folder.
Maybe.
Ok. What about that HD decrypting? Are there really some problems that with ccc v0.2 did not occur???
Pls post your experiences here, The_Ripper would be happy to know them, i think. A **** that i don't have an azbox at the moment to test myself...
cu
KJ
exactlyOriginally Posted by iko
Not clears many hd channels easily,sometimes works sometimes not...
Maybe that's because of channel change time is too long ....
I hope this will sorted by the new fw also remember this one is the very first real cccam on Azbox so we should expect some tiny problems
i find 0.2 to be better... strange!
tomorrow i will make better comparison between both cccams.
Last edited by Taykun; 20-07-2009 at 07:25 PM.
@Taykun
I agree with you but I believe next fw or next release of cccam will sort that problem
zap times very slow I believe that cause the problem, SD channels works ok but remember hd channels takes more time to switch
I don't know how they will reduce that time but this will help a lot ...
Two seperate process TV and menu ,slows it down...
that's why sometimes even if tv channel freeze menu still keep working
Again i have to ask because all my peers say that im off
i put cccam.cfg like this
################################# ####
# CCCAM 2.09 #
################################# #####
F: user1 user2 no { 0:0:3 }
F: user3 user4
F: user5 user6 no { 0:0:3 }
C: 1.webhop.net 12000 user1 user2 no { 0:0:3 }
C: 2.mine.nu 12000 user3 user4
C: 3.dyndns.org 12000 user5 user6 no { 0:0:3 }
thats only or i have to activate or change something in
DISABLE EMM : yes
EXTRA EMM LEVEL : yes
thankyou to all you guys , does this mean i can put my nds2 uk card in azbox internal card reader running this cccam
hope ya dont mind me askin to much
yes is my first post
SERVER LISTEN PORT : 17500 in cccam.cfg ; set it to 12000 or modify clines to 17500 .
Cheers ,
Val .
the cline that people give me has to have the same port than server port listen
SERVER LISTEN PORT : 8090 this is the port that i give in my cline
----------------------
i have changed the port in one cline that i was connected and i put the same port that i have on SERVER LISTEN PORT and i loose the connection.
Last edited by antrabe; 20-07-2009 at 08:35 PM.
@antrabe:
If the port in CCcam.cfg is 17500, you must give your friends C-line with port 17500. So you can look inside the CCcam.cfg and see what is the port. Make sure you remove # sympol in front of the port. And dont forget to forward this port to your Azbox IP.
Regards.
@antrabe:
Dont make any change to the C-line your friends give you. In that C-line they are putting their port which is present in their CCcam.cfg.
yes this the way that i had
the port that i give is 8090 and this the port of cccam.cfg
im going to change of port because this is the same that i used for mbox i ll tell to my friends that change my cline. i cant get that anybody connect to me.
When you forward the port to your IP, it must be TCP not UDP.
I am trying the same, I have managed to connect to my servers however I cant see my local SLY HD card in the Azbox.
Should I be using MultiCAS to read my Sly Card as it says UNKNOWN CARD when inserted.
or
Should I be using something else like Newcs to read my card and then share it with the group?
Sorry if this is a dumb question.
Yoda
only tcp?
Yes, CCcam accepts only TCP connections.
Posting Permissions
Reply With Quote
Bookmarks