Enigma 2 by The_ripper - TEST -

Printable View

Show 40 post(s) from this thread on one page

22-10-2010, 05:01 PM
MoRpHiUS_x

Help Please !!!

AZBOX Elite it remains in REBOOTING.
22-10-2010, 05:17 PM
tul

Quote:

Originally Posted by MoRpHiUS_x

Help Please !!!

AZBOX Elite it remains in REBOOTING.

put a formated fat32 pen with patch.bin inside, reboot in the hardware switch, the box will enter recovery mode, give you a ip, after that, run azUP
22-10-2010, 05:33 PM
MoRpHiUS_x

Quote:

Originally Posted by tul

put a formated fat32 pen with patch.bin inside, reboot in the hardware switch, the box will enter recovery mode, give you a ip, after that, run azUP

It does not work.

It remains in BOOTING doing ringlet.
22-10-2010, 05:35 PM
The_Ripper

@MoRpHiUS_x
What have you done before reboot ?
22-10-2010, 05:39 PM
MoRpHiUS_x

Restore to oficial firm 0.9.4890

Show IP 192.168.1.2 i used AzUP and press Update.

Show message After Rebooting, read message on the OSD.

Display VFD showing Rebooting...
------------------------------------

has since been REBOOT
22-10-2010, 05:41 PM
hfmls

do u get ftp connetion?
22-10-2010, 05:44 PM
MoRpHiUS_x

No, I can not get connection
22-10-2010, 05:48 PM
nervis

turn off the box
22-10-2010, 05:48 PM
The_Ripper

Flashing old kernel from original FW 2.6.15 failed, so without serial interface you are stuck.
22-10-2010, 05:52 PM
MoRpHiUS_x

any solution?
22-10-2010, 05:55 PM
moding

Quote:

Originally Posted by moding

i can not get my internal HDD recognized!

i am first trying to initialize my internal Samsung 500GB HDD, but i always get this error message:

Unable to initialize harddisk.
Error: Mount failed

did not change anything in the configuration. this hdd is working just fine with the original firmware for some 2 years now maybe...

what can be the problem here?

is this normal behaviour, or am i the only one with this problem?

someone...?
22-10-2010, 05:56 PM
cimkaya

Quote:

Originally Posted by sattommy

Hello Everyone,

As I am currently having a lack of time to go on with the patching of dvbmediasink...I will have to postpone adding codecs and stuff for a bit.

I am however willing to share the code with someone if he is willing to continue the development.

Let me know if you are interested,

Regards,

Tommy

Hello sattomy,

If you share your code, I can try to free some time ;)
22-10-2010, 05:56 PM
nervis

yesterday I have the same problem and I turn off my box and start again and it work perfect.

you have firmware rename to "patch"?

sorry my english
22-10-2010, 06:06 PM
MoRpHiUS_x

Quote:

Originally Posted by nervis

yesterday I have the same problem and I turn off my box and start again and it work perfect.

you have firmware rename to "patch"?

sorry my english

Not working.

Not pass of BOOTING.
22-10-2010, 07:01 PM
MickeySa

Quote:

Originally Posted by MoRpHiUS_x

Not working.

Not pass of BOOTING.

install tftp32

Download backup_kernel file from the first post of this thread.

and connect on Your box by serial cable.

CTRL+C is to break boot and enter in Yamon

Commands are :

load -b tftp://local ip of pc where tftp is running/backup_kernel 0xb0100000

After load is finished copy paste lenght ( just hexadecimal size it should be 0x680000 )

pflash write -f 0x80000 0xb0100000 0x680000

Wait that he erase and write new kernel in flash.

After that turn off and update receiver with usb with original fw or e2.
22-10-2010, 07:44 PM
MoRpHiUS_x

Thanks MickeySa but I have no serial cable.

I see I should get one in order to revive the box.
22-10-2010, 08:05 PM
digihoe

@ MoRpHiUS_x

Do you have internal sata connected? If so try to disconnect it and reboot, if that also fail you need serial cable.
22-10-2010, 08:32 PM
MoRpHiUS_x

Quote:

Originally Posted by digihoe

@ MoRpHiUS_x

Do you have internal sata connected? If so try to disconnect it and reboot, if that also fail you need serial cable.

No mi AZBOX is model Elite.
22-10-2010, 08:40 PM
hfmls

Quote:

Originally Posted by arcibald

Hi ... to All

Another effective method to install the best emu and manage them from the OSD panel is provided by these plugins:

Once these are installed, you just have correct the path for the file CCcam.cfg:

SGC_menu:
From SGC panel installed the CCcam 2.14 and go to the correct path and the environment (-dC /etc/CCcam.cfg) in the startup script CCcam_2.1.4.sh:

/usr/bin/CCcam_2.1.4
/etc/CCcam.cfg
/usr/cams/CCcam_2.1.4.sh

Glasssutil:
This will install various emu in the path:

/usr/UCM_CamSrv_bin # including cccam (2.0.11) & cccam214.

The startup scripts will find them in /usr/UCM_CamSrv_script:

Cccam_Cam.sh
Cccam214_Cam.sh

Then enter here the path and the environment (-dC /etc/CCcam.cfg) and you're done.

################################# ################################# #############
Now you can manage your CCcam from panel with their emu_manager and having a complete list of additional features.
################################# ################################# #############

Thanks ... to development teams of these plugins

Regards

Arci

I am trying to use SGC, after i install CCcam from SGC panel here can i edit the settings?
i already have CCcam.cfg in /etc too.
What should i do now?
sorry

ok, i found it, i edited:

/usr/bin/$CAM &

to

/usr/bin/$CAM -dC /etc/CCcam.cfg &
22-10-2010, 08:55 PM
tx0

guys what is the latest image for e2 and where I can dl it? Everything changed here I'm lost and confused.

Show 40 post(s) from this thread on one page