It's working fine on my TM1000ci right now with XP. I guess you might have changed something when you tried vplug, but if you unzip the folder from scratch, I would think you'd be fine.Quote:
Originally Posted by charlie
Weston Calling
Printable View
It's working fine on my TM1000ci right now with XP. I guess you might have changed something when you tried vplug, but if you unzip the folder from scratch, I would think you'd be fine.Quote:
Originally Posted by charlie
Weston Calling
Hi folks,
Just confirming that jsc works fine
thanks
Thanks for reply don,t think its Compass software, tried unistalling driver all ok in device manager sayingeverything working ok, i could have a conflict with another device in comm port 1, is there a way to check which device is on it?
JSC working fine with Compass upload dated 08/07/2010, think one of the family had not allowed access when prompted by the firewall so had to reconfigure my computer, also can i thank Giga for all his efforts as his posts was very helpfull also to Compass for all his hard work at deleivering these files
Just to add my penny farthing to this thread,
For the First Time I tried this today and after a bit of cable testing and reading ,
Wow ! Fantastic! :respect-051:
Thanks Again Compass !:party:
And a lot easier to use than Diablo i.e (configuring):)
Watching Bullsat at the moment wonderful stuff...
Many Thanks !:cheers2:
Plessy
Hi
I have JSC working ok but cant get Bulsat to clear.
using SSSP & Null Modem cable connected to receiver
Save & unpack the attachment
1. run CILQUER ICI
2. open folder SBCL_ vpulg
3. run SBCL v1.0i
4. check to see if vplug is active (ticked)
I am doing as above but cant clear any scrambled channel .What channel's should I be able to clear?and what am I doing wrong,would appreciate any help.Below is what's shown in vplug 2.4.3 monitor
[19/07/2004 22:50:57] SBCL v1.0i:SBCL - StartECM_Filt-> $00FF
[19/07/2004 22:51:20] SBCL v1.0i:SBCL - EMM Pid =$0500, SID =$002E
[19/07/2004 22:51:20] SBCL v1.0i:SBCL - Timeout… This PID is empty. Rescan...
[19/07/2004 22:58:58] SBCL v1.0i:SBCL - AutoEmm: ProviderID,CurChCAID : 060400,0604
[19/07/2004 22:58:58] SBCL v1.0i:SBCL - EMM-CA: Standarized systems
[19/07/2004 22:58:58] SBCL v1.0i:SBCL - Unknown EMM structure
[19/07/2004 22:59:58] SBCL v1.0i:SBCL - EMM Pid =$0500, SID =$002E
[19/07/2004 22:59:58] SBCL v1.0i:SBCL - Timeout… This PID is empty. Rescan...
regards
limerick
KoS package:
Code:http://en.*********.net/pack-bulsatcom.php
Is this method of clearing still working please. Thankyou and
Best wishes from,
Gibson.
Just discovered this today so gave it a try. Working on TM1500CI+ using files in post 240. :hurray:Quote:
Originally Posted by gibson
So it is Garf, thankyou.
Best wishes from,
Gibson.
Just wondering if JSC Sports on 13'E + Bulsat on 39'E is clearing for anyone using CILQUER ICI.exe +VPLUG ?
Tried yesterday + today but just getting Scrambled Channels.... is there something that I have missed i.e. updated software or are they down ?
Thanks.
Plessy.
just tried jsc not working for me,
Thanks Titus:respect-048:Quote:
Originally Posted by titus
I wont go fiddling with anything just yet as I am obviously not alone on this one......
Plessy
hope ^^COMPASS^^ updates this solution soon for you lot.
Think Compass is on holiday mate!!:respect-067:Quote:
Originally Posted by Giga
without his laptop and usb modem? that would be odd, him not passing by?
Yes but we havent heard anything from him since he posted he was off for a while, so maybe he hasnt taken his lappie THIS time?:respect-applause-00Quote:
Originally Posted by Giga
have you guys tried fausto 1.45 emulator for bulsat ? you can use diablo keybin updates and even put new key into emulator manually - as for jsc i have problems with way tm1500 reads caids - i can open some channels using an old patch dated 100807 for caids reading and an update i found for humax - if allowed i will post it
good thing this. JSC should mean something to watch for next season maybe! Excellent work compass updating this for us poor technomate owners :)
I couldn't get them to open yesterday, but right now JSC sports channels are opening fine on my TM1000ci with just CILQUER in Bulsat_39E,JSC,Sct13°E,08-07-2010_by_Compass.
Weston Calling
jsc now working for me, guess their was a problem yesterday
JSC Sports open again !:respect-048:
Bulsat not opening though. (Time-out 7025ms)
Could this be my location i.e. distance from server or server traffic issue ???
Any ways not complaining at least I have got something to watch....
Thanks for the info folks !:respect-067:
Plessy.
This is possibly the only avenue open for football at this moment in time. Thankyou Compass for possibly a new season of football.:respect-applause-00
Best wishes from,
Gibson.
Both jsc and bulsat run fine at this current time.
Disco man
im getting jsc but not bulsat on tm6800hd. same message as plessey
Are you all ready to get arrested by the card sharing FBI?
-----------------------------------------------------------------Quote:
Originally Posted by grin2
NOTE POST #226 by Giga
download/upload speed is not the essence. Response timings is all, these are showing in the DOS box below 1000 ms should give nearly no freezes.
@mynameisEarl,
there are limits what C S server can handle (users, network connection to it, same channel requests, ...) sometimes it works, other times it won't.
---------------------------------------------------------------
So:I am Grateful for having JSC working even if Bulsat is flaky at the best of times...................:respect-058:
----------------------------------------------------------------
----------------------------------------------------------Quote:
Originally Posted by joany
lol:rolleyes: Do you renounce Satan and all his works ? lol....:bravo-009:
If my dodgy mobile internet worked in the first place I'd be happy ,,,, Hence I think "they'd have a Hard Time finding me or catching me for that matter..... lol p.s. gr8 post re C.S. on other thread... will add my twopence in a wee bit...
---------------------------------------------------------------
Hope Compass is fully refreshed after his well deserved Holiday......
Thanks to All..
Plessy
cant get bulsat to open am i doing some thing wrong help please
What a pity JSC isn't showing English Prem games. Would be fantastic if Compass is able to crack a provider before kick off this coming Saturday.:respect-055:
Best wishes from,
Gibson.
Any Would you Like a Free Bag of Chips to got with that ?Quote:
Originally Posted by gibson
:frown:
Tinkering with the old stuff these days are a bit Grim, but we never give up hope...
Do you Not think that what was achieved with the latest TM Phant0M patches were phenomenal ? and the H/W learning curve of live keys via RS-232 ?.
:respect-051:
Who know's ? What may Follow.........
Giga has posted on here that Phanton 311 is not compatible with SSSP so stick with 308!
Could not agree with you more Plessy, fantastic achievement when we thought the Tech was dead and buried. Well done Compass and all that contributed!
Best wishes from,
Gibson.
Compass is AMAZING - getting we 'not mega computer literate so-and-so's' into the realms of c/s etc!
Thanks Compass - OUR friend!:respect-067:
bulsat working on technomate just coy latest dvb plugin ,copy and paste it to plugin in and bulsat opening no proplems
thanks to compass from all irish football fans for making it possible to watch match to night it is sad to say we are forced to pay for another channel to watch as our own network that we are paying a licence for cant show it.
thanks again compass.
And the Worst Part is They Want to Scrap the Analogue Transmission of these Local Native Channels with in the next two years,,,i.e. subscribe to Mr You Know Who ! in order to View....:respect-048:Quote:
Originally Posted by paudie
Won't be getting a Brass Shilling from me ! and thats for sure....
Sláinte Compass of Green, But Recently changed to Orange....:respect-051:Quote:
Originally Posted by holmroad
:)
i really enjoyed the game without a glitch but its a pity we did not win.better luck the next time.
thanks again compass.
Can anybody tell me where I can find latest plugin for technomate 6800 (not super) to get bulsat working
with thanks
Mickr