Just to be absolutely clear this is the file i over write of delete and replace with file downloaded from here Capture1.jpg
Thanks again
Just to be absolutely clear this is the file i over write of delete and replace with file downloaded from here Capture1.jpg
Thanks again
rename the oscam-1.20_9460 file
(or whatever its called by adding OLD on the end of it)
ftp the oscam file from here (download and unpack) into that bin folder
rename it to exactly match the old file name (similar to what I wrote above) , EXACTLY
chmod 755 that new file (so both are chmod 755 , old and new)
ftp the latest SoftCam.Key file to the oscam config folder and chmod to 755
restart enigma2
make the oscam changes like stream relay etc as detailed in the sticky thread by doodz
test HBO on 4 west
I also tested bulsat on 39e (irdeto2) and the usual channels opened, like nova sport and diema, using the same oscam and settings
solo2 back tomorrow..it developed a fault...will sort about wednesday.
sorry to hear that,,thanks will look forward to
thanks for the back-up....i tested 9e and works but unable to clear anything else.. is there a way to stop the stutter,
also can you have 2 cams running at the same time? ccam and oscam?
Last edited by apollo; 04-04-2016 at 08:31 PM.
only one cam running at a time..you have 3 cams installed for obvious reasons...Please check your softcam is up to date also
Stutter i don't get that..maybe login to your oscam and untick stream relay?? not sure if its ticked under that port..
4W work without stream relay..all the rest stream relay must be on..turn off in oscam webif
Last edited by dOOds; 04-04-2016 at 09:09 PM.
really thanks so much for this. im gona have a play about with it @ least i have now seen it working and i got much more of an idea what to do. i need to learn abit more and the best way is to back up and play around with it.
cheers
if installed automatic full backup which will backup the whole image for you..save it to usb before you backup and then run...remember to delete the backup folder from usb after you have downloaded it or ur receiver will most likely want to flash again..
keep trying mate...i once knew nothing but after a lot of reading id like to think i know a lot more.
I know this is an old thread.
I never did managed to get any powervu channel to open, but after a lot of reading I decided to have another go.
I Have tried both oscam ymod and oscam emu, using solo2 and openvix image, with latest oscam keys, but still no success.
Can someone tell me what channels definitely open so I can concentrate on those.
Thanks.
thats why i changed image, on my ultimo nothing worked,
OK> Managed to get the Discovers channels on 4.8E and 0.8W working with oscam emu. Not with oscam ymod.
Nothing doing on the AFN channels.
Bookmarks