Page 3 of 3 FirstFirst 123
Results 41 to 52 of 52

Thread: oscam issues specifically for powervu

  1. #41
    Verified Registered User
    Join Date
    Dec 2009
    Posts
    58
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Just to be absolutely clear this is the file i over write of delete and replace with file downloaded from here Capture1.jpg

    Thanks again

  2. #42
    Security Admin echelon's Avatar
    Join Date
    Dec 2004
    Location
    North West U.K.
    Posts
    12,916
    Thanks
    12
    Thanked 6 Times in 1 Post
    rename the oscam-1.20_9460 file
    (or whatever its called by adding OLD on the end of it)

    ftp the oscam file from here (download and unpack) into that bin folder

    rename it to exactly match the old file name (similar to what I wrote above) , EXACTLY

    chmod 755 that new file (so both are chmod 755 , old and new)

    ftp the latest SoftCam.Key file to the oscam config folder and chmod to 755

    restart enigma2

    make the oscam changes like stream relay etc as detailed in the sticky thread by doodz

    test HBO on 4 west

    I also tested bulsat on 39e (irdeto2) and the usual channels opened, like nova sport and diema, using the same oscam and settings

  3. #43
    Junior Member
    Join Date
    Dec 2004
    Posts
    10
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by dOOds View Post
    Tomorrow for any openpli user i will create a very nice working backup for solo2 if anyones interested..

    Cheers
    did you get around to this @d00ds this would be a real help for me

  4. #44
    V.I.P dOOds's Avatar
    Join Date
    Nov 2010
    Posts
    702
    Thanks
    0
    Thanked 0 Times in 0 Posts
    solo2 back tomorrow..it developed a fault...will sort about wednesday.

  5. #45
    Junior Member
    Join Date
    Dec 2004
    Posts
    10
    Thanks
    0
    Thanked 0 Times in 0 Posts
    sorry to hear that,,thanks will look forward to

  6. #46
    Junior Member
    Join Date
    Dec 2004
    Posts
    10
    Thanks
    0
    Thanked 0 Times in 0 Posts
    thanks for the back-up....i tested 9e and works but unable to clear anything else.. is there a way to stop the stutter,
    also can you have 2 cams running at the same time? ccam and oscam?
    Last edited by apollo; 04-04-2016 at 08:31 PM.

  7. #47
    V.I.P dOOds's Avatar
    Join Date
    Nov 2010
    Posts
    702
    Thanks
    0
    Thanked 0 Times in 0 Posts
    only one cam running at a time..you have 3 cams installed for obvious reasons...Please check your softcam is up to date also

    Stutter i don't get that..maybe login to your oscam and untick stream relay?? not sure if its ticked under that port..

    4W work without stream relay..all the rest stream relay must be on..turn off in oscam webif
    Last edited by dOOds; 04-04-2016 at 09:09 PM.

  8. #48
    Junior Member
    Join Date
    Dec 2004
    Posts
    10
    Thanks
    0
    Thanked 0 Times in 0 Posts
    really thanks so much for this. im gona have a play about with it @ least i have now seen it working and i got much more of an idea what to do. i need to learn abit more and the best way is to back up and play around with it.

    cheers

  9. #49
    V.I.P dOOds's Avatar
    Join Date
    Nov 2010
    Posts
    702
    Thanks
    0
    Thanked 0 Times in 0 Posts
    if installed automatic full backup which will backup the whole image for you..save it to usb before you backup and then run...remember to delete the backup folder from usb after you have downloaded it or ur receiver will most likely want to flash again..

    keep trying mate...i once knew nothing but after a lot of reading id like to think i know a lot more.

  10. #50
    V.I.P Satcat's Avatar
    Join Date
    Jan 2009
    Posts
    1,461
    Thanks
    3
    Thanked 1 Time in 1 Post
    I know this is an old thread.
    I never did managed to get any powervu channel to open, but after a lot of reading I decided to have another go.
    I Have tried both oscam ymod and oscam emu, using solo2 and openvix image, with latest oscam keys, but still no success.
    Can someone tell me what channels definitely open so I can concentrate on those.
    Thanks.

  11. #51
    V.I.P seagate1's Avatar
    Join Date
    Apr 2013
    Posts
    1,015
    Thanks
    0
    Thanked 0 Times in 0 Posts
    thats why i changed image, on my ultimo nothing worked,

  12. #52
    V.I.P Satcat's Avatar
    Join Date
    Jan 2009
    Posts
    1,461
    Thanks
    3
    Thanked 1 Time in 1 Post
    OK> Managed to get the Discovers channels on 4.8E and 0.8W working with oscam emu. Not with oscam ymod.
    Nothing doing on the AFN channels.

Page 3 of 3 FirstFirst 123

Similar Threads

  1. Replies: 3
    Last Post: 18-09-2017, 09:25 PM
  2. PowerVu With Stream relay & Oscam Emu
    By dOOds in forum PowerVu
    Replies: 17
    Last Post: 10-07-2017, 10:01 PM
  3. PowerVu
    By Edgar in forum PowerVu
    Replies: 5
    Last Post: 15-01-2016, 06:00 PM
  4. PowerVu
    By Edgar in forum Vu+ Duo2 Help Section
    Replies: 1
    Last Post: 11-01-2016, 07:45 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •