Dm800HD clone no ca found error.

[dOOds]

No mate...Try this is you have no ca found...

This summary "tutorial" to explain how to fix a DM800 not booting with the code "ERROR01 : NO CA FOUND" on the screen.

Cause of the error:
- bad flash
- official image flashed

-> ERR01 : NO CA FOUND

What doesn't work anymore:
- no boot
- no network connection
- no possible image upgrade
- DreamUp unable to upgrade even with serial cable

Solution:
1) Use DreamUp Patched with serial (null modem) cable
2) Choose COM1, connect, power ON DM800 and wait
3) After a few seconds the DM800 screen will come back with an IP address
4) Type in that address in IE
5) Flash first a BootLoader (sim201_ssl84b.nfi(If this is your bootloader)6) reboot DM800 and hold power button
7) Wait for IP to appear on DM800 screen
8)Type in that address in IE
9) Flash your desired image

I have also attached bootloader 84b to this thred....

Also for image you should try... Dreamelite-BlackHole_PHOENIX_DM800HD-SIM2-SSL84 ..best image ive tried hand's down...

Hope this helps resolve your problem..

(Thank you to the source for the No cA error)