Problem report - GUIDE + REPORT -

[xfx6600]

1.
- AzBox HD Elite
2.
- Single Tuner - conexant cx24116
3.
Update alone the channel list, why?, and add the channels that remove, I do not want to appear. can be disabled? how?

- for any original firmware is OK

4.Version Info :
Rti Core RC1
CCcam 2.1.4

5. Installation path :
DOM

6. Crashlog: N/A

[rolyv]

For the record using Azup and with a renamed patch managed to go back to old firmware now everything OK

Will try e2 again when I feel I know what I am doing

Big difference to when I started with first dish in 1984.

[xfx6600]

1.
- AzBox HD Elite
2.
- Single Tuner - conexant cx24116
3.
Update alone the channel list, why?, and add the channels that remove, I do not want to appear. can be disabled? how?

- for any original firmware is OK

4.Version Info :
Rti Core RC1
CCcam 2.1.4

5. Installation path :
DOM

6. Crashlog: N/A

and you can not lock the list of channels that do not update anything?

then please try to introduce it in later versions.

Thanks

[satdish101]

1. Azbox Ultra
2. Single tuner
3. Installation of E2 RC1 fails to detect HDMI display resulting in a black screen. Connecting a display via composite video cable allows one to change the display output properties and to output HDMI. This was not an issue in prior beta which sent signal to HDMI display on initial bootup of E2. Display is Samsung LCD, both PAL/NTSC compatible.
4. 1.0.3
5. DOM
6. Crashlog: N/A

[satdish101]

1. Azbox Ultra
2. Single tuner
3. "Factory Reset" to delete channels, bouquets etc. results in Green Screen of Death/Cog wheels loop (Same as prior betas)
4. RC1
5. DOM
6. Crashlog


As stated moicas3004 earlier in this thread, the issue appears to relate to the File w_izzar_d.py as newer version correct the issue. This bug has been present for a while now and appears to be easily fixed. Could we please have this addressed in the next version? I'd think that a bug that crashes the system would be considered critical. Thanks as always for hard work :respect-040:

[lukinario2]

1. - Elite
2. - Combo ( DVB-S2 + DVB-T )
3. If AZ goes to standby, it never comes back, it always reboots!!
4. RC1
5. Dom 2GB
6. N/A

[gorgeit]

1 prem +
2 no net connection
3 If AZ goes to standby, it never comes back, it always reboot
4 rc1
5 dom

[T0rca1950]

This problem still isn't solved and I have still to convert this videos to a 30fps video to get sound and picture syncronized....

[kooleracer]

1.Azbox Elite
2. DVB-S2 conexant cx24116
3.BUG:

I have rotor(GI-50-120) using USASLS, but when switching from satellite sometimes (23.5E gets this alot) the first transponder doesnt work you to seek channel with other TP and the first one is fixed. Also Thor (1W) some channels don't work please take a look at this, sound is cracking en when i have picture audio out of sync or picture is totally broken (not watchable) I have great reception so that is not de problem sng en agr well above 80%. Also when de rotor is still turning the azbox will give message tuning failed (countdown 4-1) but then after picture loads fine.

4.RC1 cccam 2.1.4 oozoon script, cccam 1.3b info
5.DOM
6.No Green screen.

Micha77 reported the same bug really in the early releases but still no fix.! or thans to confirm this bug.

[Egyptian11]

pls
what's DOM mean ?

[Maguncia]

pls
what's DOM mean ?

A Disk on module (DOM) is a flash drive with either 40/44 pins IDE/Standard ATA Interface USB or SATA Interface to be used as a computer hard disk drive (HDD).

[satdish101]

As stated by MickeySa in Post 1 of this thread:

!!! PLEASE DO NOT PUT THANKS in ANY POST IN THIS THREAD for EASIER CONTROL AND VIEW !!!

DO NOT USE THIS THREAD FOR DISCUSSION OR ANY TALK, THIS THREAD IS JUST FOR BUG REPORT