Azbox boot problem

[talenat]

this error make big problem on azbox newest generation :(
Please dont use option in Azbox menu HARDWARE ACELERATION, you will kill
your Azbox :ack2:
You must make now JTAG flash :(

[jimmyjim11]

Having the same problem here was doing a flash and it stopped in 4/5 @51% :willy_nilly:
no patch bin in USB storage used same storage before

[dvlajkovic]

Huh... I'm keeping H/A option ON and works smothly so far... been thru several fw upgrades since OpenSat included acceleration in their fw and got no probs whatsoever...

[naporex]

Hmm looks like I've killed my Premium :/ after trying to get back to original FW from Enigma2 azbox hangs and stucks now only in booting. Only jtag mode is a rescue?

[Carp95]

Hmm looks like I've killed my Premium :/ after trying to get back to original FW from Enigma2 azbox hangs and stucks now only in booting. Only jtag mode is a rescue?

no m8 problems above where all solved you must get into e2 topic because you did something wrong

[naporex]

It happend while I've uploaded original FW via AZup and after about hour I've plugged off the box now i get only booting on VFD :/
You refering to the E2 topic but sorry ther is 70% of crap posts so If you know wich post tells how to solve the problem pls send it here. TNX in advance.

[Carp95]

It happend while I've uploaded original FW via AZup and after about hour I've plugged off the box now i get only booting on VFD :/
You refering to the E2 topic but sorry ther is 70% of crap posts so If you know wich post tells how to solve the problem pls send it here. TNX in advance.

Reformat usb stick ( fat32 ) put patch.bin original fw on it, it should come back in resque mode enter ipadres in AzUp and press uipdate.

After reboot update menu appears first choose option 4 format appl. area, then choose option 1 update firmware.

[naporex]

I've tried that already few times with different images no luck :( only booting

EDIT:
Just tried other USB stick with LED (flashing while stick is working) and when I put it into AzBox it's not responding so I thing no power or usb slots are not active.

[nicktheclick]

I've tried that already few times with different images no luck :( only booting

EDIT:
Just tried other USB stick with LED (flashing while stick is working) and when I put it into AzBox it's not responding so I thing no power or usb slots are not active.

NAPOREX - I'm having the same problem, after the E2 recovery. Only booting mesage and no way to install any patch.bin from USB stick.
Nick

[whitewolf]

Hmm looks like I've killed my Premium :/ after trying to get back to original FW from Enigma2 azbox hangs and stucks now only in booting. Only jtag mode is a rescue?

The same problem happened to me.After I tried E2,and satisfied my curiosity, I decided to roll back the old firmware and installation stucked on booting.I don't have accest to azbox now.Please help
Respect to the team who worked on E2 project.:applause-038:

[Smurfen]

My Azbox Premium+ only shows "BOOTING" and nothing else happends!
I have tried with different USB memory sticks and even a WD HDD formated in FAT32. I have run power off/on with USB sticked in place, no response on the LCD. Before I tested the Enigma firmware it worked OK.
I run the "AzboxEnigma2RESCUE" with no problem.:respect-063:

[gbuzz]

i cant load e2 on my premium. it gets stuck on booting after install. i have no problem rolling back to official fw. it was fine before i tested e2

[naporex]

Just get recovered my Premium from dead
CA-42 usb cable with switched Tx Rx pins worked! Now my box is fully operational again

[iq180]

this error make big problem on azbox newest generation :(
Please dont use option in Azbox menu HARDWARE ACELERATION, you will kill
your Azbox :ack2:
You must make now JTAG flash :(

been there done that with the hardware acelerator on and yes it will kill
the az box and now you need to do a jtag been there and done that too.:respect-055:

[sjefen]

Just get recovered my Premium from dead
CA-42 usb cable with switched Tx Rx pins worked! Now my box is fully operational again

Hi Naporex,

Can you plz explain the process? I also have a similar problem with my azbox. I installed the newest RTI core v1.2, and after reboot i hangs on 29%, and i am unable to come into rescue mode. The box will not respond to USB-stick with patch.bin, and i cannot obtain an IP-address from the box.

Thanks
Christian

[mikie8]

imnot sure how many of these problems are simular to the ones i had but my my azbox power board was fluctuating power output . i chaanged the caps on the power board and now my poaer is stable and no more boot hanging from time to time , i also dont need to reboot as often .

using lastest beta original .

[SKEW2010]

hello friends give her a reboot and then press the remote's V + to see if you get rescue mode, and there must leave the upgrade, format area, re-download the latest firmware and reloads it, I suggest you change pendrive, it gets a 1Gb and give slow fat32 format your pc, then you put the latest firmware here renaming will only patch.bin.