Not Saving Keys

[gentlmen]

Somehow Digitv keys not saving on TM6900 HD Super +, 688p, I have done the followings: on/off few times, power on/off few times, add manually few time, add keys with softcam, still not saving the Digitv Keys.
Yes I have turned OFF all AU's as well...
Anyone have any idea why???

Regards...
Gen...

[tr8.]

digit tv should be left to au.
mine au fine with 688p patch.
I always do a factory reset after loading then reload channel list and softcam

tr8

[Giga]

Somehow Digitv keys not saving on TM6900 HD Super +, 688p, I have done the followings: on/off few times, power on/off few times, add manually few time, add keys with softcam, still not saving the Digitv Keys.
Yes I have turned OFF all AU's as well...
Anyone have any idea why???

Regards...
Gen...

explain some more not saving
you have the recent keys downloaded on the computer
put these on a usb stick
put the USB stick in front of the 6900HD super
pressed the USB button on the remote controller
if you have a USB hard disc hooked up, you select the [/volume1]

you select that file on the usb stick:

and press OK
Don't press ● Upload Key: this will save the key from the box on the stick.

[Giga]

manual entry <= click here

[Giga]

If that did not work, download this empty softcam, and put it in the receiver
Empty Softcam Technomate <= click here
should clean out and set all to zero, then reload a regular softcam.

[gentlmen]

If that did not work, download this empty softcam, and put it in the receiver
Empty Softcam Technomate <= click here
should clean out and set all to zero, then reload a regular softcam.

Yep, this one worked no problem...
Thanks alot Giga...
regards..

Gen..

[RABBY]

gentlmen

Why not use [CTechMaker 4.3 ] You can Edit the softcam no problem:respect-048:


Sometimes they are not fast ? Upto You?

[gentlmen]

gentlmen

Why not use [CTechMaker 4.3 ] You can Edit the softcam no problem:respect-048:


Sometimes they are not fast ? Upto You?

I will keep in mind thanks Rabby, you right, this may be another way to sort things out...

regards...
Gen..

[Phil]

Hi all,

I have the same problem as Gentlmen....

I'm a newbie to this reciever and not had it long, so still learning...

I have the original firmware ver 688 (not patched) and after entering the keys for Digitv and exiting the cam menus the keys don't save

Is is not possible to enter the keys manually & save them with the remote on the original firmware?

Also, how do I add a Biss Key For TVCA La Gomera?

I have come from an Echostar AD3000IP Via Reciever where I could just enter the keys in the cam menu or by chossing Current Channel Keys Edit but on the TM6900 HD Super + when I press ok on Current Channel Keys Edit nothing happens

Should it work on the original firmware or can this only be done on patched firmware?

Regards

Phil

[holmroad]

gentlmen

Why not use [CTechMaker 4.3 ] You can Edit the softcam no problem:respect-048:


Sometimes they are not fast ? Upto You?

There's now a later Techmaker:-

CTechMaker4.4

:respect-055:

[gentlmen]

Hi all,

I have the same problem as Gentlmen....

I'm a newbie to this reciever and not had it long, so still learning...

I have the original firmware ver 688 (not patched) and after entering the keys for Digitv and exiting the cam menus the keys don't save

Is is not possible to enter the keys manually & save them with the remote on the original firmware?

Also, how do I add a Biss Key For TVCA La Gomera?

I have come from an Echostar AD3000IP Via Reciever where I could just enter the keys in the cam menu or by chossing Current Channel Keys Edit but on the TM6900 HD Super + when I press ok on Current Channel Keys Edit nothing happens

Should it work on the original firmware or can this only be done on patched firmware?

Regards

Phil

Will only work on Patched fw 688p...

If you follow the link below, you will find everyting you need there...
Read this section all about TM6000 series

688p Patch

Good Luck..

Regards..
Gen..

[Giga]

I have the original firmware ver 688 (not patched) and after entering the keys for Digitv and exiting the cam menus the keys don't save

load 688p, follow link in gentlmen's post.

• Is is not possible to enter the keys manually & save them with the remote on the original firmware?
• Should it work on the original firmware or can this only be done on patched firmware?

no original firmware from any manufacturer has this feature!

Also, how do I add a Biss Key For TVCA La Gomera?

8 2 8 0 (b i s s menu) <= click here

>8 >8 where I could just enter the keys in the cam menu or by chossing Current Channel Keys Edit but on the TM6900 HD Super + when I press ok on Current Channel Keys Edit nothing happens

[mute] [exit] keyeditor CAS <= click here

[Phil]

Thanks alot guys

Will I loose my satellite positions etc after loading the patched firmware?

[Giga]

normally not, it is a safe practice to have your (motorized) dish settings on paper and a backup of your channel list.