TM-6000 Super Series New Patch 713p & CS

**mrman** · 20-01-2010, 02:31 PM

Hi anyone notice any difference with 713p. Seems more stable with newcamd no freezing detected in the short time i've watched.

After a couple of hours perfect cs fixed it seems.

**red alert** · 20-01-2010, 11:25 PM

i havnt tried that new firmware yet but i will tomorow. How are you connected through SSSP or through ethernet?? what encryption are you watching?
Ill test servers with different encryptions and ill post the results.

**mrman** · 20-01-2010, 11:32 PM

Hi connected using Ethernet conax and NDS working great.

**jok64** · 21-01-2010, 12:01 PM

ill second that working very good now on the 713

**dxman** · 21-01-2010, 01:16 PM

I have not tested the latest patch,so i can not say any thing ,if they solved the problem with the CS i will be the first to say thank you,every thing i tested before i had always problem with freezing ,lets hope it is true that they solved
But i always appreciate the work they do for the patch ,but freezing could very well be the very poor internet connection in uk,well it is in this area where i live ,so i can't complain about the patch i hope i'm wrong

regards dxman

**TJLOWE1** · 21-01-2010, 02:39 PM

Hi all,
Will this patch open JSC Sports on 7W

Thanks
TJ

**holmroad** · 21-01-2010, 09:33 PM

Originally Posted by TJLOWE1

Hi all,
Will this patch open JSC Sports on 7W

Thanks
TJ

No mate!

**TJLOWE1** · 22-01-2010, 12:11 AM

Thanks for the info, Holmroad. !! "shame about it tho "

TJ

**sheild 10** · 22-01-2010, 01:27 AM

installed patch 713 still getting freeze and got disconnected 3 times today not sure if it is the patch or broadband provider friend of mine had the same but have the same bb but different towns so i check it out over the next couple of days and get back to you .

but i am still very happy and a big thanks to magic for the hard work and time put in to creating the patch.:respect-055:

**Giga** · 22-01-2010, 10:51 AM

also load: 2nd part <= click here
and read this: Surprise <= click here

**red alert** · 22-01-2010, 03:20 PM

Thers definetly an improvement after latest patch and addon. But i am unable to open more than one encryption on same server or different server. I tried different delay settings and openeing only one encryption at a time works well and no freezes with viaccess. Although with just nds running it stops every 20 minutes. I had problem opening viaccess and nds servers at same time, the nds server only worked for 20 seconds. Seca server wouldnt even open when nds server was working. Less problems with SSSP still. But overall its good patch and improvement on cs using ethernet connection, seems like 6900 cs works optimally with viaccess more than the other encryptions.

**dxman** · 22-01-2010, 07:07 PM

can anyone tell me if imagining this I'm sure I'm not dreaming
I put the latest patch add on and latest TM softcam I
can receive SCT and 1 sport art Channell,is not free to air either
Patch 713P latest patch

Can anyone confirm this,it surprise me i just can't belive it
Just to make sure i turn the patch off and i got scramble ,patch on sct ok with no cam no card
please try and let me know

**Giga** · 22-01-2010, 07:29 PM

confirm on SCT, could have warned this is a hard XXX channel

**dxman** · 22-01-2010, 07:40 PM

it surprise me GIGA
after i put the latest patch today for some reason i lost all my satellite positions,i had to do it again ,i had to do the East /West limit again ,took me long time to find all the sat position,the funny thing i had upload all my settings ,something did not like,well all working again thank god for that

thanks giga for confirming that made my day ,but in the same time it surprise me

**Giga** · 22-01-2010, 07:48 PM

always save the current channel list before update! all info is in there, not 100% sure for motorized setup, if not keep these on paper.
If someone knows this if motorized setup is in the channellist and what is not for this setup?

**dxman** · 23-01-2010, 04:47 AM

yes giga
i did upload all my setting before the patch,that should include all the differents satellite positions channel list and so on ,i use a 36v motor connected to the vbox,i enable the disq 1.2 and it has been working all this time,but today after i put the patch I reset put the add on ,my dish was all over the place,it lost the east limit,west limit was ok,so i had to do the limit east/west again and find all the sat position again what a terrible job,the rain did not help at all,but at the end of the day i done it,i hope i don't have to do it again,i lost my temper otherwise
talk to you soon