I was flicking through the channels the other night and watched maybe 10-15 mins on the tonight show and did not see if freeze. I'll give it a try tonight and see what happens.Originally Posted by echelon
I was flicking through the channels the other night and watched maybe 10-15 mins on the tonight show and did not see if freeze. I'll give it a try tonight and see what happens.
Just seen elsewhere that there is another set of configs. Not tested but if anyone wants to try them. Always have a quick check through them to see if there is anything that should NOT be there.
Thanks to kegnkiwi I finally got this sorted out. 9E, 5E etc all working again. Unfortunately I am using VTI image as I need the CI+ functionality for a Fransat card. Off topic I know, but if anyone has a better solution to CI+ I'd be delighted to know it!
A quick google search shows oscam can open fransat cards. Config below.
[reader]
label = FRANSAT
protocol = internal
detect = CD
device = /dev/sci0
mhz = 450
cardmhz = 357
caid = 0500
ident = 0500:041950,041960
aeskeys = 0500@041950:xxxxxxxx,0500@041960: xxxxxxxxxxx
group = 1
auprovid = 041950,041960
cccreshare = 1
emmcache = 1,3,31,0
blockemm-unknown = 1
Or other people are saying ncam opens fransat with this config below.
................................. ..............................
hi i find the best forfransat pc 5 or pc6 is ncam not prob and fast
label = fransat
description = fransat
protocol = internal
device = /dev/sci1
caid = 0500
detect = cd
mhz = 450
cardmhz = 2700
ident = 0500:041950,042820,041960,411970, 041980,00FFF4
aeskeys = 0500@041950:xxxxxxxxxxxxxxxxxxxxx xxx
group = 40
emmcache = 1,2,6,0
blockemm-unknown = 1
blockemm-g = 1
lb_weight = 500
auprovid = 00FFF4
ratelimitecm = 4
ecmunique = 1
ratelimittime = 9000
srvidholdtime = 2000
cooldown = 30,600
if u need help let me know is ok with card pc5 and pc6
................................. ................................. .......
Thanks Kegnkiwi for posting openvix oscam emu file. I have tried to install it but get the message "found non standard softcam" and it won't start. What am I doing wrong?
Last edited by Satcat; 19-10-2018 at 12:54 PM.
Hi satcat I really don't know but I do now from a personal point of view I can never get on with vix images. everything seems hard work. There are other ways to install files such as installing the levi45 plugin or satvenus plugin and then hope they have updated their servers with the latest oscam. I checked on levi45 on tuesday night and it was the old file but its been days since I looked.
I tried to fpt it to temp file and then "install local extension" that didn't work. So I tried sending it to usr>softcams and changing attributes to 755 thats when I get the error message.
It does state that it is an openvix file........
Its an ipk file which does go into the /folder and you said you have a solo2 which is a mips box not an arm box so it should be the correct one.
I can't understand how to load this oscam emu file.
If I try to open it with winrar is says "the archive is either in unknown format damaged"
Help!!!
You do not open this file it is sent as an ipk file and you simply send it to the /tmp folder and install via the install manual plugins which you have done. If it does not work then there is either a problem with the file or a problem with your image. Attached here is a file which allows you more addons and softcams. You install it just as above by sending it to your /tmp folder and install manually. Give it a try
If anyone else wants to try it it gives a good selection of cams to choose from for various images.
Last edited by kegnkiwi; 19-10-2018 at 02:31 PM.
if its a rar or zip file, use 7zip to extract the files
an ipk is ftp to var/tmp and installed from the box user menu (the ipk installer option)
i alo cannot install keep getting error messages cannot over write ,and others .tried vuzero4k factory reset,without restore settings ,but find 4 different oscam settings are still there and cannot be removed,and work with lines ????????????????????
tried loaded that levi45 file and loaded the oscam emu mips from it. Everything went ok until I tried to start it. It wouldn't!
I guess I must have a bad file somewhere. I think a fresh complete image install required.
Is the file you're trying meant for an Arm receiver, or just for the mips receivers?
Tried a factory rest,box went off now stuck with vu on tv screen,remote does nothing,tried to reflash openvix, but will not, front of box flashing,is there a vuzero4k factory reflash or does box have to go back,it has been doing strange things in the last few days
You could try and a different image such as openatv and see if that kicks the box back into life.....
You can try the original image, from the vuplus website:
Code:http://code.vuplus.com/
Alternatively I'll upload the Black Hole image, for the Zero 4K, which you can try, it'll take a few minutes.
https://www.satpimps.co.uk/showthread.php?177907-Black-Hole-3-0-6
Last edited by Mickha; 19-10-2018 at 06:48 PM.
brain cells must be going,when updating the vuzero4k using usb....box off ...usb in ..box on ...box front ..flashes dimlyslowly ....then bright flashing. but box wont work untill usb is removed... now starting from scratch and scanning sats,,then hope the reset has cleared out the old oscam files.
Here is a link to pur-e2 images. Very nice looking images.
http://pur-e2.club/OU/images/index.php?dir=6.2/vuplus/
Well i've done that, and I still can't get the oscam emu ipk to load normally, and if using levi45 it won't start,
I suppose the next step is to try another image Any suggestions which to use for AFN?
Posting Permissions
Reply With Quote
Bookmarks