Fransat on vu+ Duo . Fransat sur vu+ duo

[3tv]

I try all the code with at the end 1001 or 1002 or 8888 but nothing open like last time

195.168.1.65. 195.168.0.95

I am lost but like show on my previous pic a lot of thing change on my Oscam file

have you installed a ipk over the top of your previous install, that will explain why the oscam.server files have been changed? you will need to add the fransat reader info again.

has your receiver ip changed?

[Nozahic]

I think I update a new ipk file , I think Mickha was talking about that.

About the Fransat change I need to write that to all of them , like before or to just one time and delete all the other thing who are on my Oscam.serv file . Because you have a lot now on my new Oscam serv file.

I will look on my box if my ip change

Regards

[Nozahic]

also i still connect to fileZilla with 192.168.1.65

and on the vu+ Dreambox Webcontrol under Extra / Device info , i have that :


Network Interface (eth0)



Mac Address:

None



DHCP enabled:

False



IP:

192.168.1.65



Netmask:

255.255.255.0



Gateway:

192.168.1.1

[Nozahic]

i have that in my oscam file : ( i need to change the info to the 3 reader or just the first one and delete the rest



[reader]
label = Focussat-Conax
enable = 0
protocol = internal
device = /dev/sci0
pincode = 1234
services = focussat,!freesatviaccess,!freesa tconax
lb_whitelist_services = focussat
caid = 0B02
ecmwhitelist = 4E,53,60,65,72,84,9C,97,8A
detect = cd
ident = 0B02:000000
group = 2
emmcache = 2,2,2,1
blockemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1


[reader]
label = TVR-Freesat-Viaccess
enable = 0
protocol = internal
device = /dev/sci0
services = !focussat,freesatviaccess,!freesa tconax
lb_whitelist_services = freesatviaccess
caid = 0500
ecmwhitelist = 2F,61
detect = cd
ident = 0500:025900,025910,FFF720
class = 0a,1e
group = 3
emmcache = 2,2,2,1
blockemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
auprovid = 025900

[reader]
label = TVR-Freesat-Conax
enable = 0
protocol = internal
device = /dev/sci0
pincode = 1234
services = !focussat,!freesatviaccess,freesa tconax
lb_whitelist_services = freesatconax
caid = 0B02
ecmwhitelist = 67
detect = cd
ident = 0B02:000000
group = 4
emmcache = 2,2,2,1
blockemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1

[3tv]

if you don't have any of those cards then just delete them

[Nozahic]

Ok, I delete them and put what you say to me b4 for Fransat , correct ?

[Nozahic]

I change the Oscam server configuration, what I need to do now

Regards

[Nozahic]

I still can't access to oscam web interface, I don't know why . Need help,

[Nozahic]

Hi guys

Hope you are ok ? I still need your help because I am lost now because it look like nothing is working properly since I try this update

Can you help me please

Cheers

[Mickha]

Can you please post a picture, of your receiver, showing the cams, by pressing the Blue key, on your remote.
This will show which version you last loaded, and have selected.

[Nozahic]

Hi Mickha

Thank you for your reply. Below pic of the Oscam

But I notice if I press <>. I have to new Oscam Oscam-emu11233. And Oscam 11233

Maybe I need to change this settle because it look like I am on my old Oscam , like I post to you few days ago

Regards

[3tv]

Hi guys

Hope you are ok ? I still need your help because I am lost now because it look like nothing is working properly since I try this update

Can you help me please

Cheers

try switching to the new oscam and login to the interface, if that doesn't work

copy all the config files, oscam.server, oscam.conf etc to your pc then place them in usr/keys and reboot, then see if you can login into the oscam interface.

if none of those work try a different oscam, google for oscam compatible with your image. post back here once you have it running with access to the web interface.

[Nozahic]

Ok I will try that but other way I will connect one of my other box and see if I am more lucky with the web interface

[Nozahic]

Hi Guys

I try everything with my box for have a web interface but nothing work, 😪

I decide to connect one of the other box, and I mange to find the satellite and put all the channel ( on my own, good step ) 😉

Now I put the web interface pic I take on the computer with all the settle. Maybe you will see why we have a problem

Also just for remind you , this 3 box was working and sharing a sky card in Spain. Maybe the settle of the web interface need to be change

Regards

[Nozahic]

I send a email to the company who settle the box for me when I was in Spain because for me this Oscam work but because this guy settle my 3 box together for work with sky card , maybe the settle on the web interface don't work when I put the Fransat card because the settle is fix for sky card. I look a little in the web interface and everything is for sky card, all the channel, card name ect.
I will let you know when it reply or maybe you have a idea to change that
Regards

[Nozahic]

Good evening

The guy of the company reply to me and we exchange few email, it look like my Oscam is maybe too old for read the Fransat card. I need a new Oscam setting who work with Fransat , the guy say to me you have a lot of Oscam and he is not sure witch one will work with Fransat.

Now sorry to be little blonde or stupid, I would like to know if I can have a Oscam who will work with Fransat, and explain to me how to do this update properly because and the last box , it look like I update so many thing, my box is lost now 😂😂😂

I know it will take some time of you but I am new and try to learn and it is not easy. ( also I don't need to change other thing in my box )

Thank you in advance for your reply and good evening

[sonic1]

The thread is very confusing, do you know if you have Viaccess or Conax card to start with ?

[Nozahic]

The thread is very confusing, do you know if you have Viaccess or Conax card to start with ?

Like I say I am new on that, I don't know : how I can look at that ? Maybe I can look and let you know

Sorry can be more clear

[Mickha]

He has stated that it's a Fransat card, used on 5 West, so it's Viaccess 4.0 encryption.
He does have an official receiver, in which the card works, but not an official Viaccess CI+ Cam, hence the attempt to get it working using his VU+ receiver and Oscam.

[3tv]

The thread is very confusing, do you know if you have Viaccess or Conax card to start with ?

my head is battered trying to help the guy. Stuff gets lost in translation :(

think the easiest solution would be for him to install a repository panel such as tspanel, check his receiver information-about to determine the image running then search the panel for oscam that's compatible with that.


edit:

or flash a new image containing a recent version of oscam.