as a x tv eng you have to test the transistor the brown glue is to stop hf vibrations if any help i have a working power board
as a x tv eng you have to test the transistor the brown glue is to stop hf vibrations if any help i have a working power board
C23 looks like the culprit here.Originally Posted by blackie42
Remove get a new one with same or better specs, replace remembering the correct polarity.
duff cap.jpg
C23 vomiting or maybe just ectoplasm leaking?
I have the easy to use 7000 and having read posts here i realise this post was un necessary.
Last edited by frund; 06-07-2016 at 09:47 PM. Reason: no reply
hi ,
Many thanks for the info guys ,its helped a lot .
Have had the same issue on my 6yr old 9000HD for about 2 months now ,first it wasn't holding the time ,then recently its started to completely freeze approx. every 15 mins .Had to turn off/on again
Had been running the 2012 FW ,saw there was a 2014 one and upgraded ..strangely and most of all a relief ,the freezing has stopped ..I hope) .
As a precaution though have ordered the caps from F*****Ls.
Been running for 3 hours now ..all's ok ....so far
Last edited by floydy007; 02-10-2016 at 11:22 PM.
Posting Permissions
Reply With Quote
Bookmarks