Enigma 2 RC 3

**The Doc** · 20-01-2011, 07:19 PM

cjjdool - thanks for that, appreciated :respect-054:

I didn't even consider the workgroup name changing, and I certainly wouldn't have known where to set it.

I've updated the 'smb.conf' file, but I still don't see the PC in the list on the AZ Box media player, even after rebooting the box and PC. I'll keep digging and see if I can find anything.

Thanks again.

**The Doc** · 20-01-2011, 07:21 PM

Originally Posted by sectorNOlimits

You can "mount" shared folder by windows on yor E2 system that way:
add to the fstab on your /etc folder one or more lines like this, one for each mount:

Code:

\\\\<WINDOWS-IP>\\<WINDOWS-SHARE> /media/music   cifs       username=user,pass=password              0 0

before rebooting the system make the destination folder (in this sample /media/music)

SNL

Thanks for the info, I'll try that shortly and get back with the results... cheers, appreciated :respect-054:

**moicas3004** · 20-01-2011, 07:25 PM

Originally Posted by cjjdool

@moicas3004 Samba is implemented and running well on Enigma2 RC3 (and earlier releases)

see below example where I connected the "Harddisk" from the Azbox on a windows pc

C:\Windows\system32>net view \\azbox
Shared resources at \\azbox

The AZBox network services

Share name Type Used as Comment

-------------------------------------------------------------------------------
Configuration Disk Configuration files - take care!
Harddisk Disk The harddisk
The command completed successfully.

C:\Windows\system32>net use z: \\azbox\Harddisk
The command completed successfully.

C:\Windows\system32>dir z:
Volume in drive Z is Harddisk
Volume Serial Number is 05E5-2042

Directory of Z:\

20-01-2011 18:00 <DIR> .
20-01-2011 11:05 <DIR> ..
20-01-2011 17:42 <DIR> movie
0 File(s) 0 bytes
3 Dir(s) 1.560.969.216 bytes free

C:\Windows\system32>

@The Doc

RC3 (and earlier do not have the Domain name set to "Workgroup". Instead the Domain name "Dream" is used. This will cause a windows PC that belong to the Domain Workgroup not to see the Azbox.

You can change the Azbox domain name in the file /etc/samba/smb.conf

Thanks alot for the info, i didn't know that. :respect-055:

**the illuminati** · 20-01-2011, 08:01 PM

Hi all
just a dumb question
i loaded RC3 and after reboot i got bootlogo RC2 is that it or i reloaded the old one :-)

**johank** · 20-01-2011, 08:22 PM

I have problem with some programs at HD.

HD Premium +, tuner STV090x9 (DVBS 2).

Astra 23,5E ČT 1 OK, NOVA Green Screen,
Astra 19,2 ZDF HD – Green screen
Thor 0.8 Green Screen
In RC1 were HD programs OK

Radio - green screem

SD programs OK

**Doume** · 20-01-2011, 08:46 PM

Originally Posted by the illuminati

Hi all
just a dumb question
i loaded RC3 and after reboot i got bootlogo RC2 is that it or i reloaded the old one :-)

It's normal : It's a mistake in RC3

**gravatasufoca** · 20-01-2011, 08:52 PM

Is it possible to record a channel and watch another? Just like we do in the official fw(on the same tp).

**puhcho** · 20-01-2011, 08:57 PM

Now i can say: That is a good work!:respect-040::respect-040::respect-040::respect-040::respect-040::respect-040::respect-040::respect-040:

**naveh** · 20-01-2011, 09:21 PM

installation on Premiun without any problem.
1. cannot play ts recorded tv programs.
2. redlight HD on hotbird no picture, only sound (but what a sound).
3. cannot download BADR 26, only one freq.
4. atlantic bird 4 only on a freq with network search downloads the channels.

Great improvment, keep up the good job guys.

**Anonymous** · 20-01-2011, 09:40 PM

For me almost perfect :bowing-036:

After few hours of use there is no 1 crash, this is most stabe version ever.

Thanx guys

P.S. HD channels on 0.8W are OK but with small sluttering, but on 39.0E I don't have HD channels, audio is OK but there is no picture. Old tuner or... ?

**moicas3004** · 20-01-2011, 09:53 PM

Originally Posted by gravatasufoca

Is it possible to record a channel and watch another? Just like we do in the official fw(on the same tp).

Yes it is.

In RC2 i manage to record 2 chanels on same TP at the same time but in RC3 i think it is not possible. Only if they are FTA chanels.

**madomape** · 20-01-2011, 10:05 PM

Originally Posted by moicas3004

Yes it is.

In RC2 i manage to record 2 chanels on same TP at the same time but in RC3 i think it is not possible. Only if they are FTA chanels.

So we can confirm we ha problems when recording scrambled channels?

Another question, there are some problems with Canal+ HD and Xtra HD on Astra 19,2º. While audio is there, sometimes video doesn't appear in several seconds. Then, when we have video and audio, we have jumps in video.

Please, moicas3004, report this to the official forum as I've been banned. My apologies.

**gravatasufoca** · 20-01-2011, 10:33 PM

Originally Posted by moicas3004

Yes it is.

In RC2 i manage to record 2 chanels on same TP at the same time but in RC3 i think it is not possible. Only if they are FTA chanels.

Manage to record 2 channels was taken from this release or its a bug?

**The Doc** · 20-01-2011, 10:37 PM

Originally Posted by sectorNOlimits

You can "mount" shared folder by windows on yor E2 system that way:
add to the fstab on your /etc folder one or more lines like this, one for each mount:

Code:

\\\\<WINDOWS-IP>\\<WINDOWS-SHARE> /media/music   cifs       username=user,pass=password              0 0

before rebooting the system make the destination folder (in this sample /media/music)

SNL

Thanks for that, worked a treat :respect-054:

I think I need to learn a bit about linux...

**Anonymous** · 21-01-2011, 01:46 AM

HD channels on 28.2E are not OK, they are sluterring (Sky Premiere HD, Sky Thriller and etc.)

Great work team, this is first release for everyday use.

**hfmls** · 21-01-2011, 05:31 AM

yes, it is possible!

i just recorded now in 30W two channels at same time in same transponder.
using oscam.

**hfmls** · 21-01-2011, 05:34 AM

Originally Posted by gravatasufoca

Is it possible to record a channel and watch another? Just like we do in the official fw(on the same tp).

yes, i did it using oscam

**n@ki** · 21-01-2011, 09:07 AM

Thanks

**Anonymous** · 21-01-2011, 09:32 AM

Standby is fixed, but there is another problem. After "waking up" lot of channels tune failed or after 5-6 minutes they are stopped working.

**Bertole** · 21-01-2011, 09:46 AM

Install on elite without problems:
*install cccam 2.2.1 works good after 4h is freezing after reboot ok...then again
*redlight HD on hotbird no picture, only sound
*subtitler by dd works good tested on SKY OK ....but not working in Glass skin...
*DVB subtitles ok but not EPG changing sound to another language- no sound must work trough channels to get sound again( on TV total you need fix to get subtitles in the middle)
* after 6h on stand by, wake up fast...but I get no sound and picture with pink watermark...must reboot manual....then it works about 1.min and AZbox reboots self...but after that ok
* on display time after 6h ok