Enigma 2 by The_ripper - TEST -

**sattommy** · 26-10-2010, 06:30 PM

Originally Posted by hfmls

sattomy i tried now a 38 mb/s mkv and ac3 sound
the killa.sample.mkv ( the one with a million birds flying around)
i get no sounddrops and image is ok.....but, at first seconds i get many many pixelization.

i noticed the diference from other clips were because this .mkv is kinda old and it's level 5.1 .. i know this level sucks and should be 4.1.

do u think u could do something to improve this or should we only use 4.1 level? (since nowadays, releases are always 4.1)

i might be able to fix this. need to test later.

You can adjust the keymap.xml of the mediaplayer to check if skip pause etc are working, cause i have no idea ;-)

**jkont** · 26-10-2010, 06:34 PM

Originally Posted by kasukabe

@jkont:
On file /etc/init.d/bootup:

Code:

insmod /lib/modules/2.6.22.19-19-the_ripper/extra/em8634dvb.ko options="-analog -f PAL_BG -digital -f HDMI_720p50 -hdmi_chip $hdmichip 0 14 15 100 0"

in this line, set it to HDMI_1080p50, and after reboot, you will get 1080p Display.

Thank you very much !

**hfmls** · 26-10-2010, 06:39 PM

Originally Posted by sattommy

i might be able to fix this. need to test later.

You can adjust the keymap.xml of the mediaplayer to check if skip pause etc are working, cause i have no idea ;-)

ok changed level to 4.1, same stuff happens. this is really old, not even dxva works in my pc. i get same exactly pixelization as in azbox enigma2.

**sattommy** · 26-10-2010, 06:43 PM

Originally Posted by hfmls

ok changed level to 4.1, same stuff happens. this is really old, not even dxva works in my pc. i get same exactly pixelization as in azbox enigma2.

then there is no need for the fix, cause this would patch it down to 4.1 But videos like these are rare so doesnt matter.

Do you need to install seperate plugin for subtitles on dreambox?

**hfmls** · 26-10-2010, 06:49 PM

Originally Posted by sattommy

then there is no need for the fix, cause this would patch it down to 4.1 But videos like these are rare so doesnt matter.

Do you need to install seperate plugin for subtitles on dreambox?

yeah, forget this. we don't need this. i googled it a bit and noticed many users saying it's a bad encode and wrong level and old sample.

i tested a much hard and eavier one and it worked flawless. nevermind this.

regarding subtitles i don't think we need to install a plugin to play .srt subtitle files.
since kathrein and dm800 (dream-elite image) plays them if they have same name as movie.
movie.avi
movie.srt

in kathrein we press "text" and in dm800 if i remember if we press text (i think this is the step) a simple menu pops up to open the subtitle file we want. but i really can't tell you 100% how it works, i don't really remember (if some user wants to pop up

)

but, no i never installed any plugin for this. but my bet goes in pressing TEXT

**voki081** · 26-10-2010, 06:52 PM

OK people I tried to install E2 and now stucked in the RESCUE MODE?
My USB stick is still pluged in Azbox, and I didnt receive any IP on VFD.

What to do now, any help is appreciated.
Thanks

**hfmls** · 26-10-2010, 06:56 PM

Originally Posted by voki081

OK people I tried to install E2 and now stucked in the RESCUE MODE?
My USB stick is still pluged in Azbox, and I didnt receive any IP on VFD.

What to do now, any help is appreciated.
Thanks

u gotta be more especific, did u turn off and on, removed usb and such. try everything before.

**tul** · 26-10-2010, 06:59 PM

Originally Posted by voki081

OK people I tried to install E2 and now stucked in the RESCUE MODE?
My USB stick is still pluged in Azbox, and I didnt receive any IP on VFD.

What to do now, any help is appreciated.
Thanks

probably your dhcp server doesnt reach the azbox, check lan cable and dhcp (auto ip) in your router.

**leif666** · 26-10-2010, 07:01 PM

Originally Posted by voki081

OK people I tried to install E2 and now stucked in the RESCUE MODE?
My USB stick is still pluged in Azbox, and I didnt receive any IP on VFD.

What to do now, any help is appreciated.
Thanks

You do not get a ip if you are connected wireless.
I got stuck at Rescue Mode. I tried AZUp 1.1 without luck.
Then i I plugged in the cable, and everything worked fine

Read this --> https://www.satpimps.co.uk/showthread.php?t=139642

**voki081** · 26-10-2010, 07:02 PM

I followed new Telesat Readme.txt for installing, step by step.

Code:

I) You have Official FW in your AZBox andyou want to install E2
Switch off AZBox
Put usb stick with patch.bin (e2)
switch on AZBox
Follow messages on GUI for update official FW (standard procedure)
After about 1 min , your receiver will reboot
Dont remove USB Stick from AZBox !!!
wait for IP adress on VFD of AZBox

And I havent received IP adress, my box directly go to rescue mode. om VFD is displayed RESCUE MODE?.

What to try next?

P.S. also i formated my stick in FAT32

**voki081** · 26-10-2010, 07:07 PM

Originally Posted by tul

probably your dhcp server doesnt reach the azbox, check lan cable and dhcp (auto ip) in your router.

@tul and @leif666,

i dont use router nor wireless conection, I ve directly connected with crossover cable.

**gravatasufoca** · 26-10-2010, 07:08 PM

Now I'm confused. I installed the 1.0.27 release, and I watched a 1080p movie with .srt subtitles.
I read that in 1.0.28 release the subtitles doesn't work.

It works or dont?

**sattommy** · 26-10-2010, 07:10 PM

Originally Posted by gravatasufoca

Now I'm confused. I installed the 1.0.27 release, and I watched a 1080p movie with .srt subtitles.
I read that in 1.0.28 release the subtitles doesn't work.

It works or dont?

Hello,

what skin did you use?
Are you sure, please test again. Because i just tested and not working.

Regard,

Tommy

**leif666** · 26-10-2010, 07:11 PM

Originally Posted by voki081

@tul and @leif666,

i dont use router nor wireless conection, I ve directly connected with crossover cable.

Start the tuner without the cable, and plug it in when the display shows
"RESCUE MODE"

**A13x** · 26-10-2010, 07:23 PM

have update to new version but i have the same erros
why combo tuner?have only one inside...

Tuner Detection in progress for elite ...
Tuner Combination Type : COMBO
1th TUNER Checking...
i2c-adapter i2c-0: Unable to perform I2C read - RM_ERROR
CheckTunerId: reg=0x0 (error=-22)
i2c-adapter i2c-0: Unable to perform I2C read - RM_ERROR
CheckTunerId: reg=0xff (error=-22)
This receiver has DVB_S TUNER Conexent SP2633 tuner
2th TUNER Checking...
i2c-adapter i2c-0: Unable to perform I2C read - RM_ERROR
CheckTunerId: reg=0x7f (error=-22)
Fail to find DVB_T TUNER 1
i2c-adapter i2c-0: Unable to perform I2C read - RM_ERROR
CheckTunerId: reg=0x0 (error=-22)
Fail to find DVB_C TUNER 1
i2c-adapter i2c-0: Unable to perform I2C read - RM_ERROR
CheckTunerId: reg=0x0 (error=-22)
Not yet TC90507XBG ISDBT GetTunerID added
Fail to find ISDBT TUNER 1
ATSC TUNER 1 not implemented

thx for @ll

**gravatasufoca** · 26-10-2010, 07:23 PM

Originally Posted by sattommy

Hello,

what skin did you use?

Regard,

Tommy

I didnt change the skin. Is the default.

I could choose the subtitle clicking the "check" botton. There I could choose subtitle and audio track.

**voki081** · 26-10-2010, 07:27 PM

Originally Posted by leif666

Start the tuner without the cable, and plug it in when the display shows
"RESCUE MODE"

nothing RESCUE MODE? is still present on VFD.

Also i tried three diferent usb stick and diferent usb ports on AZ.
Nothing, nada, ništa

Any solution?
Thanks