Enigma 2 by The_ripper - TEST -

[Minoco]

This is going very fast! Let's wait for dvb-t support soon or at least support dual tuner dvb-s/t without the need to disconect the dvb-t

Anyway this is still a test version, not even a beta so great work

[amyren]

I have just tested 1.0.27 and I cant get it to find any channels when scanning. SNR always at 99% though.
I do have a 1/8 switch and have set the tuner settings exactly the same as I have in my DM800. I have also tried to set it to a single LNB, but still no channels found.

I also tried replacing the files cx24116.ko and em8634dvb.ko but still the same.
Then I tried the other tip, to go back to 1.0.25 and replace the files, enigma2 - Tunerinfo.py and cx24116.ko (following Mickeysa's description). But still no channels found, and SNR still at 99%.
And with this 1.0.25 version I cant get signal on the HDMI output, only scart. I had HDMI output on 1.0.27.

But still I'm impressed just to se that the enigma2 is running quite well on the Azbox Premium, and will test next version soon

[trax020]

People,

New release tonight.

Stay tuned.

What is new :

- Fix for no signal on DVB-S2 tuner for some users

- Multimedia fix for various formats by sattomy


Stay tuned.

Does the STC TIMERS will be turned on in this release?

[moicas3004]

New Forum and SVN site for AZBOX HD :respect-040:

http://www.azbox-enigma.eu/?cat=1

[medmed]

this is officiel (by the_ripper Team ) forum or not ?

[moicas3004]

this is officiel (by the_ripper Team ) forum or not ?

Yes it is the oficial one, of E2 Azbox Team

[happyhammer]

First of all you have to connect to the console (with RS232 cable not DLC5 or wiggler) and see the result. It is important, because from console output you can find out how to recover your box - with serial console only or there is needed JTAG cable

Regards!

thx, i'm well aware of how to recover with serial via YAMON prompt. I was just highlighting that no-one on this site has demonstrated that they have sucessfully used the JTAG interface, although its often suggested as a method to recover.

This conversation may be better in a seperate thread as its not directly related to E2, although it was raised because the box was stuck in "booting".

[Abdul1508]

Originally Posted by Smudger
Is this a fix for the old boards?

Yes it is.

my azbox premium is not so old. I got him and three months, the scan did not worked with E 1.25/26/27, only with the E 1.21 worked the scan well.
I wonder if it is the old boards. "sory for my bad english"

[stra]

thx, i'm well aware of how to recover with serial via YAMON prompt. I was just highlighting that no-one on this site has demonstrated that they have sucessfully used the JTAG interface, although its often suggested as a method to recover.

This conversation may be better in a seperate thread as its not directly related to E2, although it was raised because the box was stuck in "booting".

Of course on this site no one demonstrated this, but i have posted links to pristavka.de (you have to use google translate if you don't understand russian ;-) ). There everything is do***ented quite well including flashing NOR with JTAG interface. And I can assure you that flashing with JTAG is possible !
But before that - it is better to be sure that Yamon is broken...
Can you post a log from console ? (May be in different thread?)

Regards!

[killerno]

hi everyone,

first of all, thanks for the AMAZING job for the_Ripper and his team!!!
i have a question:is this enigma supports the recroding to an extranal usb hard disk?
thanks.

[kebien]

You must read the thread,because it was asked before,and the answer is NO,recording to internal or external hdd is not possible yet.
Is something that will be worked on in the future.
Developers will let you know.

[kanber_kav]

sn:TD0071-095-000XXX
REW 3.0



TUNER TM10_DVB-S2 REW:3.00
2009.04.02-DNBU24512ICC

[MickeySa]

Kanber, read PM

[A13x]

@MickeySa
any news on the tuner fix for older boards?

[jamesjay]

@MickeySa
any news on the tuner fix for older boards?

I can answer this on behalf of MickeySa and it's no, because if there was a fix it would have been already posted for you to test.

I am patiently waiting for a + driver to be completed, but realise asking about it won't make it arrive quicker, I check the post since the last time I was logged on and if it ain't there it ain't ready!!

[kanber_kav]

new driver tested. (private drivers)
Signal ok.
Thanks @MickeySa

[andriorn]

I can answer this on behalf of MickeySa and it's no, because if there was a fix it would have been already posted for you to test.

I am patiently waiting for a + driver to be completed, but realise asking about it won't make it arrive quicker, I check the post since the last time I was logged on and if it ain't there it ain't ready!!

I assume the reason he is asking is that MickeySa said that there whould be a fix posted last night! and it did not come so he is asking if there are any news on it!

[gadgeteer]

I'm hopefully waiting tuner fix release too.......

[jamesjay]

I assume the reason he is asking is that MickeySa said that there whould be a fix posted last night! and it did not come so he is asking if there are any news on it!

Yes I assumed that too because I read the same posts, but I also assumed that if there was no fix posted then it hadn't been fixed yet...therefore the post is not reporting a bug or the fix of a previously known bug but really just nuisance posting.

[The_Ripper]

There is fix, it's working, but unfortunately we didnt have a chance to make new E2 image.
I hope today new image will be ready with "sattomy" new gstdvbmedia plugin too.