I´ve got problem with signal on elite model... changed the driver cx24116.ko and the receiver stops at 66% with the dvb-t adapter desactivated... no working....
I´ve got problem with signal on elite model... changed the driver cx24116.ko and the receiver stops at 66% with the dvb-t adapter desactivated... no working....
Dear Smudger, Fatum and all which have problem with signal.
Also put this file.
@MickeySa
Sorry :(
cx24116_cmd_execute() Firmware not responding
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
cx24116_readreg: reg=0x9d (error=-22)
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
cx24116_readreg: reg=0x9d (error=-22)
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
cx24116_readreg: reg=0x9d (error=-22)
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
cx24116_readreg: reg=0xc6 (error=-22)
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
cx24116_readreg: reg=0xc7 (error=-22)
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
cx24116_readreg: reg=0xc8 (error=-22)
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
cx24116_readreg: reg=0xc9 (error=-22)
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
cx24116_readreg: reg=0xd5 (error=-22)
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
cx24116_readreg: reg=0xd5 (error=-22)
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
cx24116_readreg: reg=0x20 (error=-22)
i2c-adapter i2c-0: Unable to perform I2C write LEN 2 RM_TIMEOUT
cx24116_writereg: writereg error(err == -22, reg == 0x00, value == 0x19)
i2c-adapter i2c-0: Unable to perform I2C write LEN 2 RM_TIMEOUT
cx24116_writereg: writereg error(err == -22, reg == 0x1f, value == 0x01)
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
cx24116_readreg: reg=0x1f (error=-22)
Positioner set to 13.0E
Mode single for test
me too.......Originally Posted by Smudger
have change the cx24116.ko but the same....
Tuner Detection in progress for elite ...
Tuner Combination Type : COMBO
1th TUNER Checking...
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
CheckTunerId: reg=0x0 (error=-22)
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
CheckTunerId: reg=0xff (error=-22)
This receiver has DVB_S TUNER Conexent SP2633 tuner
2th TUNER Checking...
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
CheckTunerId: reg=0x7f (error=-22)
Fail to find DVB_T TUNER 1
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
CheckTunerId: reg=0x0 (error=-22)
Fail to find DVB_C TUNER 1
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
CheckTunerId: reg=0x0 (error=-22)
Not yet TC90507XBG ISDBT GetTunerID added
Fail to find ISDBT TUNER 1
ATSC TUNER 1 not implemented
remove your ISDBT TUNER.
cx24116_cmd_execute() Firmware not responding
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
cx24116_readreg: reg=0x9d (error=-22)
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
cx24116_readreg: reg=0x9d (error=-22)
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
cx24116_readreg: reg=0x9d (error=-22)
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
cx24116_readreg: reg=0x9d (error=-22)
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
cx24116_readreg: reg=0x9d (error=-22)
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
cx24116_readreg: reg=0x9d (error=-22)
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
cx24116_readreg: reg=0x9d (error=-22)
still no go with both files supplied.
on a channel change
cx24116_readreg: reg=0x1f (error=-22)
cx24116_cmd_execute() Firmware not responding
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
cx24116_readreg: reg=0x9d (error=-22)
CX polarity/voltage = 0
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
cx24116_readreg: reg=0x20 (error=-22)
i2c-adapter i2c-0: Unable to perform I2C write LEN 2 RM_TIMEOUT
cx24116_writereg: writereg error(err == -22, reg == 0x00, value == 0x15)
i2c-adapter i2c-0: Unable to perform I2C write LEN 2 RM_TIMEOUT
cx24116_writereg: writereg error(err == -22, reg == 0x01, value == 0x01)
i2c-adapter i2c-0: Unable to perform I2C write LEN 2 RM_TIMEOUT
cx24116_writereg: writereg error(err == -22, reg == 0x1f, value == 0x01)
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
cx24116_readreg: reg=0x1f (error=-22)
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
Last edited by Smudger; 25-10-2010 at 04:14 PM.
@The_Ripper, MickeySa
Whats exactly the problem with Premium+
Is it the cx24116 versus the stv0903/stv6110
or the sil9030 versus sil9134
Or is it both of them.
Thanks to the sattomy, now MKV is running perfectly, without any problems.
DTS over HDMI also work perfect.
Terminator salvation 1080p.mkv
Titles from MKV, also OK.
Result of TOP command :
Code:Mem: 97680K used, 3088K free, 0K shrd, 248K buff, 42612K cached CPU: 13.3% usr 20.0% sys 0.0% nic 66.6% idle 0.0% io 0.0% irq 0.0% sirq Load average: 1.24 1.23 0.98 2/43 2105 PID PPID USER STAT VSZ %MEM CPU %CPU COMMAND 2082 1883 root D 137m139.6 0 9.9 /usr/bin/enigma2 2083 1883 root S 137m139.6 0 9.9 /usr/bin/enigma2
i have get the same errors...
do you have two tuners?
When can we expect the new files for mediaplayer? With mkv, its almost complete, the only thing left is srt subtitles.
Great work guys.:respect-049:
nope
have remove the ISDBT and here the log
Tuner Detection in progress for elite ...
Tuner Combination Type : COMBO
1th TUNER Checking...
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
CheckTunerId: reg=0x0 (error=-22)
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
CheckTunerId: reg=0xff (error=-22)
This receiver has DVB_S TUNER Conexent SP2633 tuner
2th TUNER Checking...
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
CheckTunerId: reg=0x7f (error=-22)
Fail to find DVB_T TUNER 1
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
CheckTunerId: reg=0x0 (error=-22)
Fail to find DVB_C TUNER 1
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
CheckTunerId: reg=0x0 (error=-22)
Not yet TC90507XBG ISDBT GetTunerID added
Fail to find ISDBT TUNER 1
Last edited by A13x; 25-10-2010 at 04:29 PM.
@dutchmatrix
I am still working on CX driver, regarding p+ driver need more few changes , I hope in next days it will be ready for public....
Regarding mediaplayer , that part is for sattomy, he is still working on some tweaks, but he gave some members new libs to try, thats what MickeySa is showing right now, we shell release new libs or with new E2 image ...
Stay tuned
@Smudger, @A13x
Did you ever see channel opened since 1.025 released? My box( 1 tuner) is about 1 year 4 month old. It seems that we have the same problem but I can open channel(got signal) by luck for sometime(diseqc working too). Anyway, after I reboot, all the luck has gone........
Last edited by gadgeteer; 25-10-2010 at 04:36 PM.
I had the same once but only once after reboot never been able since 1.0.25 . even tried going back but was unable to recreate picture.
I have such old receiver too , before the ci fix and with one tuner only ... and the same problem, but the problem appeared first time here after the diseq fix, on the other versions i never had signal problems .... perhaps someone can upload that old files to verify.
But i have signal oki , after changing diseq settings .. then there is signal again after some reboots ... perhaps it helps to fix the problem.
Last edited by croat; 25-10-2010 at 04:39 PM.
@The_Ripper
When we can expect solution for sound and video lag?
Hello, all
I have an Elite, with 2 tuners ( DVB-S2 and DVB-T )
I've installed 1.0.27 (without any additional patches)
For now, I've only configured tuner A ( DVB-S2 )
as follow :
Position A : AB3 5°W
Position B : Hotbird 13°E
Position C : Astra 19.2°E
Position D : nothing connected
Automatic scan does'nt detect anything
I've installed a setting with DMEdit
But no image, on any Sat
Only for feedback.
Keep the good work, guys
And many thanks for your efforts.
Posting Permissions
Reply With Quote
Bookmarks