We tryed to explain i think more than 50 times !!!
This will be last time to explain to every lazy user which dont want to use Search option or to search just one single thread.
WE TURNED OFF STC TIMERS, SO THERE IS NO SOUND ON SOME CHANNELS OR THERE IS PROBLEM WITH SOUND !!!
THOSE THINGS WILL BE FIXED IN NEXT RELEASE
Neutrino keymap for AzBox HD
https://www.satpimps.co.uk/showthread.php?t=141557
@MickeySa , do you think, that a second tunner on the box can cause instabilaty in the DVB-S tunner?
I have the signal lost after the first reboot. Guys are saying that they removed the second tunner and that signal lost is resolved.
If you can confirm this, please post officialy in the home page website so all people can act on this subject.
I also have DVB-T, and after reboot I have no signal, and now I also have a pink background instead of black, crazy azbox lolol.
@halabessa
I explain why, read again old posts and other topics.
Regarding DVB-T tuners I will check it
I have the second tunner DVB-C and also after first reboot no signal in DVB-S tunner.Originally Posted by The_Ripper
But, this firmware is becoming very good. Thanks to the Developers.
:respect-023::respect-023::respect-023::respect-023:
enigma2 keymap.xml
Ok button :infobar
Up and Down :Channel
ch+ and ch-:Channel
Left and right :Open service
Exit :exit
İnfo: EPG
http://www.mediafire.com/?gg824y240aczagh
serviceeditor
channel hide
/tmp
telnet "ipkg install /tmp/*.ipk" enter
http://www.mediafire.com/?31bbjjqjghyrt6l
stupid question, could i map things to get keymap like kathrein enigma2 and azbox hd original firmware?
OK to show channel list, up and down zapping and right left volume change.
infobar in info button.
epg in guide, etc.
i really prefer this method
just tried v.27. dvb-s ok dvb-s2 no services, wireless driver cannot be configured with e2 interface, volume cannot be changed with remote. also there is no panel to start CAM (blue button)
Last edited by tx0; 24-10-2010 at 11:37 PM.
"No data on transponder"
I have a Azbox elite dual tuner (SAT + DTT)
Fw .27 installed, enabled multiple bouquet from the menu.
Configured the tuner as USALS and enter my coordinates.
Installed list Vhannibal MOTOR(October 23) by enigmEdit through in enigma 2.4 mode(then reloaded settings). The list is displayed correctly.
Unfortunately I can not see the FTA channels.
And the error that you read about these channels is as follows:
"No data on transponder"
If i connect or disconnect sat cable to azbox, I always have signal SNR 99% and BER: -22 on all channels, FTA and encrypted.
Does anyone have any idea what can I do?
Is for a week that are blocked on this issue. I've never seen anything with enigma 2, with none of the versions.
Let me know.
Thank you very much.
PS: The scans work but can not find any channels.The decoder is fully working with official firmware(opensat)
@pazzoider
If You wasn't so lazy to read some posts from this thread. You would find, that You need to disconnect DVB-T tuner ( to remove it from Receiver ), and to try again, it will work.
Next time, use search option.
@MickeySa,
Don't even waste your precious time. Let'em go.
Someday they'll learn..
I have the problem in satellite scanning with azbox premium(one tuner). I live in Thailand and use satellite Thaicom5 (78.5E). This sat is not in the list but that's not the problem. I can use other sats and do manual scan instead. I can make satellite scan success just 2 times only(image before and 1.025) and I think it done by mistake. It's because when I reboot the box, the signal is always gone(with the same setting). I've done all sat config(simple, advance, diseqc and use satellites.xml which has my sat from generator) but I can't make it success especially for 1.027
Can anyone help me to solve this problem?? By the way, I've to say enormous thank to The_Ripper and Co for their wonderful project toward azbox hd user.
What you suggest to buy for the next future (what You think will work sooner) internal DVB-T (opensat) tuner interface or usb DVB-T tuner interface (just working with DM800 OE1.6 images)?
thanks!
Hmmm it required factory JTAG...... I cant buy it in my country easy! Is there schematics somewhere?DimitarCC try this
have not got it going my self tough
Can you give schematics how to build RS232 to TTL interface cable?
You can also use the NOKIA TTL / RS232 DKU5 or USB CA-42 data cable ...
Rx is at Nokia pop-port pin 6
Tx is at Nokia pop-port pin 7
GND is at Nokia pop-port pin 8
Here more info:
or build the interface RS232/TTL (these schemes):Code:http://buffalo.nas-central.org/index.php/Use_a_Nokia_Serial_Cable_on_an_ARM9_Linkstation http://pinouts.ru/CellularPhonesCables/nokia_dku-5_cable_pinout.shtml
Regards
Arci
Last edited by arcibald; 25-10-2010 at 08:51 AM.
Posting Permissions
Reply With Quote
Bookmarks