Enigma 2 by The_ripper - TEST -

**crazy2** · 24-10-2010, 04:17 AM

Originally Posted by MickeySa View Post
For those with DiseQc not working, download and unpack all files :

For those with DiseQc not working, download and unpack all files :

Go back to previous version of Enigma 2 1.0.25 and do this :

Go in rescue mode :

mkdir /D

mount /dev/hda1 /D

FTP to Receiver :

File cx24116.ko copy to :

/D/lib/modules/2.6.22.19-19-the_ripper/extra/

When asked to Overwrite, say Yes

File Tunerinfo.py copy to :

/D/usr/lib/enigma2/python/Components

File enigma2 copy to :

/D/usr/bin

When asked to Overwrite, say Yes

Remove USB Stick, and turn off and turn on receiver so all will work.

https://www.satpimps.co.uk/showthrea...135894&page=81

**azbox4ever** · 24-10-2010, 04:21 AM

I'm testing the new release.

DiseqC work on Astra/Hotbird ,i got all channel by scannig those 2 sat

Sky 3D HD on Astra 19.2°E is working
Das Erste HD is working (Astra 19.2°E)
ZDF HD is workin (Astra 19.2°E)
Einfestival HD is working (Astra 19.2°E)
Cccam is working in all encrypted channel HD and SD ,on both satélite Astra -hotbird
I have no sound on many channel (some time got it by playing with "RESOLUTION" button remote control)

**azbox4ever** · 24-10-2010, 04:26 AM

Originally Posted by Abdul1508

and it worked?

YEst it's working ,i use DCC 2.95 ,on i transfer file one by one

Open DCC tranfet the first file ,close DCC ,open DCC transfert the second file ,close DCC ,open DCC trnasfer the tird file.
Reboot Azbox

**RogerThis** · 24-10-2010, 08:23 AM

Thanks for all the hard work last night. The project is really coming along. Nice to see you have a website up and running azbox-enigma.eu :respect-040:

Will the new website be the main place for downloads from now on?
All that's missing is the howto section. If you need a hand with that I'm a native English speaker.

Also big thanks to satpimps for the dedicated section! :respect-055:

Have you decided on the official name for the image and team?
The Ripper? E2 Azbox? azbox-enigma?

**bobster** · 24-10-2010, 08:43 AM

Is disecq motor working with usals now?

**pegaman** · 24-10-2010, 09:05 AM

i am watching F1 with no problems at all using 1.0.25 and mgcamd...
Excellent job...

**albaki77** · 24-10-2010, 09:13 AM

Seem to be getting this error at about 30% of updating.Tried uninstall of azup and delete telsat folder then re install

**albaki77** · 24-10-2010, 09:27 AM

Originally Posted by albaki77

Seem to be getting this error at about 30% of updating.Tried uninstall of azup and delete telsat folder then re install

just tried a new USB stick and problem solved :respect-010:

**dejan30yu** · 24-10-2010, 09:29 AM

pise mi geeko : p sta sada da radim

**DimitarCC** · 24-10-2010, 09:53 AM

Originally Posted by MoRpHiUS_x

Screenshot failure.

This issue is resolved as stated MickeySa, or otherwise?.

Is failure of botloader in flash?.

Thanks!

PD: I tried doing what it says the file on recovery.rar, but still staying in booting

hi! I have the same problem! Furst E2 was boot OK! After that i was service scan and after that i was decide to restart the receiver! After that that screen showed up! How can i fix that? I dont have serial cable but i have telnet and FTP access to the box! Please someone help me! Thanks!

**fcis7000e+** · 24-10-2010, 10:02 AM

Originally Posted by pegaman

i am watching F1 with no problems at all using 1.0.25 and mgcamd...
Excellent job...

Hi,

Are you using mgcamd as EMU (i.e. using softcam and not CS)?
Is there a way to download the latest softcam directly from the box (like we used with TechSat plug-in with original firmware)

Thanks.

PS: Congratulations to The Ripper and rest of the team for the excelent work being done.

**pegaman** · 24-10-2010, 10:13 AM

Originally Posted by fcis7000e+

Hi,

Are you using mgcamd as EMU (i.e. using softcam and not CS)?
Is there a way to download the latest softcam directly from the box (like we used with TechSat plug-in with original firmware)

Thanks.

PS: Congratulations to The Ripper and rest of the team for the excelent work being done.

Hi i am using mgcamd as CS. There is a post for this and how to enable autostart.

**stra** · 24-10-2010, 10:54 AM

@DimitarCC
@MoRpHiUS_x

Hi
You have to check if there is working Yamon. You can do this with serial cable. If Yamon is working - there is relative easy solution of the problem.
if Yamon is broken (zboot (1) failed) - There are two possible options:
- Removing NOR flash and programing content with external flash programmer, and re-soldering it again on the PCB.
- using JTAG for flashing broken NOR flash
check this:
1. http://www.pristavka.de/index.php?topic=6691.0
2. http://www.pristavka.de/index.php/topic,5763.0.html

Regards!

**DimitarCC** · 24-10-2010, 11:00 AM

Originally Posted by stra

@DimitarCC
@MoRpHiUS_x

Hi
You have to check if there is working Yamon. You can do this with serial cable. If Yamon is working - there is relative easy solution of the problem.
if Yamon is broken (zboot (1) failed) - There are two possible options:
- Removing NOR flash and programing content with external flash programmer, and re-soldering it again on the PCB.
- using JTAG for flashing broken NOR flash
check this:
1. http://www.pristavka.de/index.php?topic=6691.0
2. http://www.pristavka.de/index.php/topic,5763.0.html

Regards!

actually after using repair package i was able to get to usb upgrade menu. from that point can i fix my box? But remote is not reacting

**hfmls** · 24-10-2010, 11:17 AM

guys, just woke up, how is the situation?
latest E2_AZBox_1.0.26 works ok cccam in scrambled channels
dvb-s2 too?
thank you.

**pazzoider** · 24-10-2010, 11:26 AM

Originally Posted by albaki77

Seem to be getting this error at about 30% of updating.Tried uninstall of azup and delete telsat folder then re install

I've go same error and my solution was:

ATTENTION:
Please check if in usb there are at least 60-70 MB of free space after AZUP upgrade.
This space is needed to create CRAMFS in usb.
Otherwise you get that error