Enigma 2 by The_ripper - TEST -

[hperez]

hperez cccam is the best emu out there. if u set it up correctly it does amazing things with the most stability there is.

in azbox hd original firmware most of the times it wouldn't open channels because The_Ripper didn't finalize dvbapi_module, that's why. (he said it) He did that in a few days just so we could test it. It's nothing to use in a everyday basis.

I know dvbapi_module is buggy, many times it doesn't even open channels. But what about using cccam+multicas? (with no dvbapi_module). It still takes some time to open channels, and there are freezes... This even happens if I run cccam in the computer. Will this go away using enigma? I really doubt.

On the other hand oscam opens channels very fast, and there are very few freezes. And if it's run in the computer it works even better. I think cccam can't beat it.

Right now oscam has two problems: it can't record and it makes the azbox very slow. I hope oscam in enigma won't have these issues.

[nstergi]

i am one of you who waits for e2 to be released.

i read the latest posts at this thread on daily basis 2 or 3 time.

PLEASE dont make this thread Azbox vs Dreambox or Multicas vs cccam or anything else.

i would appreciate only info from developers
thanks

[enrico001u]

@hperez your problems are not cccam. It is original opensat firmware.
Cccam will open all channels in under 1 or 2 seconds depending on your server.
it is the same speed as a genuine subsrciption box once again depending on your shares and internet speed and ping/latency.

Oscam was born with the main purpose to read certain nds cards.
Whereas cccam is more focused on organised sharing.


Sorry for going off topic!

Apologies

Good work and good luck with az e2

[hfmls]

I know dvbapi_module is buggy, many times it doesn't even open channels. But what about using cccam+multicas? (with no dvbapi_module). It still takes some time to open channels, and there are freezes... This even happens if I run cccam in the computer. Will this go away using enigma? I really doubt.

On the other hand oscam opens channels very fast, and there are very few freezes. And if it's run in the computer it works even better. I think cccam can't beat it.

Right now oscam has two problems: it can't record and it makes the azbox very slow. I hope oscam in enigma won't have these issues.

your problem is not ccccam. it's any other thing ,but not cccam.
let's go back on topic, open a thread other place else if u want help about that.:cheers2:

[kanber_kav]

diseqc not run
ca device not run

Do you have a date for new drivers?

[The_Ripper]

@kanber_kev
Soon new driver,

you said, you are programmer, check cx24116.c code in linux kernel source and try to fix DISEQC, Sigma doesnt control that nor my driver.

[hfmls]

Hi kanber_kav.
The_Ripper said:
@all
2 parts are missing in drivers, CA device part of DVB driver and attaching audio/video pid to Sigma DVBCSA decoding.

Just to tell, CA device part of DVB driver is finished ...
Pending second part ...



btw: i see no more info about mediaplayer
could u guys tell us how is the situation? MickeySA and team.
Cheers

[kanber_kav]

thanks friend.

[DragontearS]

@kanber_kev
Soon new driver,

you said, you are programmer, check cx24116.c code in linux kernel source and try to fix DISEQC, Sigma doesnt control that nor my driver.

@the_ripper: do you think this new driver will solve problems of certain users (including me) that could not find channels and could not have also fta vision with apparently no reason?

[sattommy]

Hi kanber_kav.
The_Ripper said:
@all
2 parts are missing in drivers, CA device part of DVB driver and attaching audio/video pid to Sigma DVBCSA decoding.

Just to tell, CA device part of DVB driver is finished ...
Pending second part ...



btw: i see no more info about mediaplayer
could u guys tell us how is the situation? MickeySA and team.
Cheers

thats being worked on, no worries ;-)
Able to playback most audio formats now. Vob playback already working, soon more video.

[hfmls]

thank you very much. will it be included work so far in next release?
btw, will we have .srt subtitle support from the beginning ?

[sattommy]

thank you very much. will it be included work so far in next release?
btw, will we have .srt subtitle support from the beginning ?

I don't know yet. Like i said first working on the audio part. Please guys just relax and wait for a new release. You will see what is in it, when it's done

[sattommy]

I don't know yet. Like i said first working on the audio part. Please guys just relax and wait for a new release. You will see what is in it, when it's done

Any people using FLAC?

[hfmls]

Any people using FLAC?

yeah, i have some game soundtrack in FLAC.

[kebien]

thats being worked on, no worries ;-)
Able to playback most audio formats now. Vob playback already working, soon more video.

A request to developers
Is possible to add a way to DEFINE the channel format when entered manually?
I mean in the same way original azbox firmware does,where you set the video and audio format for the decoder.
E2 doesn't supply the means to do this,but I assume you can add this necessary feature.

[DragontearS]

ok here is the answer to dmesg command.
I hope it can help fixing problems. As you can see tuner dvb-s2 is recognized (latest driver) but nothing changed

[DataBlockCollection] (TAG = 07 - pos = 24 - size = 3)
[DataBlockCollection] (TAG = 07 - pos = 28 - size = 2)
[EDID] Parsing DTD 0 from Extension 1
DTD: 148500000 Hz, 1920 x 1080 p, HSync 720-528-44, 0, Vsync 45-4-5, 0, 1600:900 mm
VMF Mode line from DTD: 148500000, 1920, 1080, 2640, 528, 44, 148, 1, 1125, 4, 5, 36, 1, DTD_1920x1080p50 [16:9]
[EDID] Parsing DTD 1 from Extension 1
DTD: 74250000 Hz, 1280 x 720 p, HSync 700-440-40, 0, Vsync 30-5-5, 0, 1600:900 mm
VMF Mode line from DTD: 74250000, 1280, 720, 1980, 440, 40, 220, 1, 750, 5, 5, 20, 1, DTD_1280x720p50 [16:9]
[EDID] Parsing DTD 2 from Extension 1
DTD: 74250000 Hz, 1920 x 540 i, HSync 280-88-44, 0, Vsync 22-2-5, 0, 1600:900 mm
VMF Mode line from DTD: 74175824, 1920, 540, 2200, 88, 44, 148, 1, 1125, 2, 5, 15, 1, DTD_1920x1080i59 [16:9]
[EDID] Parsing DTD 3 from Extension 1
DTD: 74250000 Hz, 1920 x 540 i, HSync 720-528-44, 0, Vsync 22-2-5, 0, 1600:900 mm
VMF Mode line from DTD: 74250000, 1920, 540, 2640, 528, 44, 148, 1, 1125, 2, 5, 15, 1, DTD_1920x1080i50 [16:9]
[EDID] The first 0 DTDs of 6 are native
[HDMI] EDID with 2 blocks parsed, supporting:
HDMI, RGB and YCbCr, 24 bit color.
DTD 1920x1080p59.94 1600:900 - Preferred
DTD 1280x720p59.94 1600:900
DTD 1920x1080p50.00 1600:900
DTD 1280x720p50.00 1600:900
DTD 1920x1080i59.94 1600:900
DTD 1920x1080i50.00 1600:900
VIC 31 - 1920x1080p 50Hz (16:9)
VIC 16 - 1920x1080p 59.94/60Hz (16:9)
VIC 20 - 1920x1080i 50Hz (16:9)
VIC 5 - 1920x1080i 59.94/60Hz (16:9)
VIC 19 - 1280x720p 50Hz (16:9)
VIC 4 - 1280x720p 59.94/60Hz (16:9)
VIC 18 - 720x576p 50Hz (16:9)
VIC 17 - 720x576p 50Hz (4:3)
VIC 22 - 720(1440)x576i 50Hz (16:9)
VIC 21 - 720(1440)x576i 50Hz (4:3)
VIC 3 - 720x480p 59.94/60Hz (16:9)
VIC 2 - 720x480p 59.94/60Hz (4:3)
VIC 7 - 720(1440)x480i 59.94/60Hz (16:9)
VIC 6 - 720(1440)x480i 59.94/60Hz (4:3)
VIC 1 - 640x480p 59.94/60Hz (4:3)
VIC 32 - 1920x1080p 23.97/24Hz (16:9)

Audio Format #1 Linear PCM, up to 2 channels, fs:<6>32<6>/<6>44.1<6>/<6>48<6> kHz<6>, <6>16
/<6>20
/<6>24
bit
[HDMI] Setting up HDMI mode.
limit : 8
hdmi_ComponentDepth : 0
Digital Output towards HDMI: SDR, Inv. polarity, DE, 601, 24 bit bus with 8 bit components
component_size : 8 : 128
[HDMI] Enabling TMDS.
[HDMI] Sending AVI InfoFrame.
[HDMI] Wrong YCbCr color space for this video mode (VIC 19), has to be YCbCr 709
AVI Frame - Colorspace YCbCr 601
AVI Frame - Sampling Mode 4:4:4
AVI Frame - Wrong 4:3 Aspect Ratio for this video mode, making correction.
AVI Frame - Aspect Ratio: 16:9
[HDMI] *** HotPlug Guard Time ended.
[HDMI] *** Request Reconfiguration.
[HDMI] *** Operational.
set agc=0 aps=0 cgmsa=0 rcd=0 asb=0 on module_id=19
ASP: setting 4:3 on module id 0x00000033 with FrameInfoForce
OSD: addr 0x2702CB28 in system memory!
OSD: addr = 2702d194, size = 8294400
Uncached dram size for gfx engine 1012l
gfx engine task structure allocated at 0x2702c728
em8634 GFX fb: locked 1 regions, starting from region 654496148 at offset 0x00000000
OSD: videomemory = 0x2702D194 (16588800 bytes)
fb0: em8634 GFX fb frame buffer device, using 16200K of video memory
Registering SMP8634 I2C adapter ...
I2C VALID
Tuner Detection in progress for premium ...
Tuner Combination Type : COMBO
1th TUNER Checking...
i2c-adapter i2c-0: Unable to perform I2C read - RM_ERROR
CheckTunerId: reg=0x0 (error=-22)
i2c-adapter i2c-0: Unable to perform I2C read - RM_ERROR
CheckTunerId: reg=0xff (error=-22)
This receiver has DVB_S TUNER Conexent SP2633 tuner
2th TUNER Checking...
i2c-adapter i2c-0: Unable to perform I2C read - RM_ERROR
CheckTunerId: reg=0x7f (error=-22)
Fail to find DVB_T TUNER 1
i2c-adapter i2c-0: Unable to perform I2C read - RM_ERROR
CheckTunerId: reg=0x0 (error=-22)
Fail to find DVB_C TUNER 1
i2c-adapter i2c-0: Unable to perform I2C read - RM_ERROR
CheckTunerId: reg=0x0 (error=-22)
Not yet TC90507XBG ISDBT GetTunerID added
Fail to find ISDBT TUNER 1
ATSC TUNER 1 not implemented
DVB: demux_engine: demux ucode doesn't need DRAM
DVB: registering new adapter (smp8634 DVB adapter)
Trying to attach Conexant 24116 driver ...
CX24116 device 00000501
DVB: registering frontend 0 (Conexant CX24116/CX24118)...
DVB: audio0 initializing audio parameters
DVB: audio0 audio ucode cached addr: 0x26F43E3C, size 0x000E88DE, end: 0x2702C71A
DVB: audio0 ===============ALLOCATING 1b_DRAM AUDIO SHARED MEMORY addr: 0x26E1EE30, size 0x00125000
DVB: audio0 Set SPDIFOut
DVB: video0 video ucode cached addr: 0x26DCEA00, size 0x00050422, end: 0x26E1EE22
DVB: video0 ===============ALLOCATING 119_DRAM VIDEO SCHEDULER SHARED MEMORY addr: 0x26DCE900, size 0x000000F4
jffs2: Too few erase blocks (2)
Wrong ACK(0x10)
eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
DVB: video0 Open the pools
DVB: video0 dmapool id = 0
DVB: video0 error while retrieve the surface address!
DVB: Opening stc timer 0
DVB: video0 decoder data size is 23883776
DVB: video0 PictureProtectedMemorySize is 0
DVB: video0 BitstreamProtectedMemorySize is 0
DVB: video0 UnprotectedMemorySize is 28154684
DVB: video0 video uncached addr: 0x252F4DB8, size 0x01AD9B3C, end: 0x26DCE8F4
DVB: video0 count : 1, timeout = 10000
DVB: video0 count : 1, timeout = 10000
DVB: video0 play command sended to the video decoder
DVB: Play STC!
DVB: video0 play command sended to the video decoder
DVB: video0 stop command sended to the video decoder
DVB: Stop STC!
dvb_video_release
cx24116_firmware_ondemand: Waiting for internal firmware upload (cx24116)...
cx24116_load_firmware: FW version 1.22.82.0
cx24116_firmware_ondemand: Firmware upload complete
polarity/voltage = 2
polarity/voltage = 2
polarity/voltage = 2
UDF-fs: No VRS found
UDF-fs: No VRS found
DVB: audio0 Open the pools
DVB: audio0 dmapool id = 0
DVB: audio0 Open the pools
DVB: audio0 dmapool id = 0
DVB: audio0 Open the pools
DVB: audio0 dmapool id = 0
polarity/voltage = 2
DEMUX: SetSource(0)
polarity/voltage = 0
dtv_property_cache_sync()
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
demux task: RUAMalloc(4320) -> 252e4714
DVB: Closing STC!
DVB: video0 stop command sended to the video decoder
DVB: video0 video ucode cached addr: 0x252942E4, size 0x00050422, end: 0x252E4706
DVB: video0 ===============ALLOCATING 119_DRAM VIDEO SCHEDULER SHARED MEMORY addr: 0x252941E4, size 0x000000F4
DVB: audio0 initializing audio parameters
DVB: audio0 audio ucode cached addr: 0x251AB8F8, size 0x000E88DE, end: 0x252941D6
DVB: audio0 ===============ALLOCATING 1b_DRAM AUDIO SHARED MEMORY addr: 0x250868EC, size 0x00125000
DVB: audio0 Set SPDIFOut
DVB: Opening stc timer 0
DVB: video0 decoder data size is 23883776
DVB: video0 PictureProtectedMemorySize is 0
DVB: video0 BitstreamProtectedMemorySize is 0
DVB: video0 UnprotectedMemorySize is 28130108
DVB: video0 video uncached addr: 0x235B2DA4, size 0x01AD3B3C, end: 0x250868E0
DVB: video0 count : 1, timeout = 10000
DVB: audio0 audio uncached addr: 0x2346CC88, size 0x00146110, end: 0x235B2D98
DVB: audio0 count : 1, timeout = 10000
DVB: audio0 Channel Status from SPDIF: 0x1900 0x0004
em8xxx [/OE/AZBOX/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:961] Registering event callback with module_id 44 and mask 0x00100ad0
DVB: video0 play command sended to the video decoder
DVB: audio0 play command sended to the audio decoder
DVB: demux_engine Play command sended
DVB: demux_engine Play command GOT!
DVB: audio0 Open the pools
DVB: audio0 dmapool id = 0
DVB: video0 Open the pools
DVB: video0 dmapool id = 1
DVB: video0 play command sended to the video decoder
DVB: audio0 play command sended to the audio decoder
em8xxx0 [/OE/AZBOX/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1237] EMhwlibUnregisterCleanable module 44, prop 4456 (from rmmod em8xxx_id 1737): not found
em8xxx0 [/OE/AZBOX/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1237] EMhwlibUnregisterCleanable module 44, prop 4461 (from rmmod em8xxx_id 1737): not found
em8xxx0 [/OE/AZBOX/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1237] EMhwlibUnregisterCleanable module 44, prop 4456 (from rmmod em8xxx_id 1737): not found
em8xxx0 [/OE/AZBOX/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1237] EMhwlibUnregisterCleanable module 44, prop 4461 (from rmmod em8xxx_id 1737): not found
em8xxx0 [/OE/AZBOX/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1237] EMhwlibUnregisterCleanable module 44, prop 4456 (from rmmod em8xxx_id 1737): not found
em8xxx0 [/OE/AZBOX/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1237] EMhwlibUnregisterCleanable module 44, prop 4461 (from rmmod em8xxx_id 1737): not found
dtv_property_cache_sync()
DVB: audio0 stop command sended to the audio decoder
DVB: video0 stop command sended to the video decoder
DVB: Stop STC!
DVB: video0 stop command sended to the video decoder
DVB: video0 count : 1, timeout = 10000
dvb_video_release
DVB: audio0 play command sended to the audio decoder
DEMUX: SetSource(0)
dtv_property_cache_sync()
DEMUX: SetSource(0)
dtv_property_cache_sync()
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
DVB: audio0 Open the pools
DVB: audio0 dmapool id = 0
DVB: video0 Open the pools
DVB: video0 dmapool id = 1
DVB: video0 play command sended to the video decoder
DVB: audio0 play command sended to the audio decoder
DVB: audio0 stop command sended to the audio decoder
DVB: video0 stop command sended to the video decoder
DVB: Stop STC!
DVB: video0 stop command sended to the video decoder
DVB: video0 count : 1, timeout = 10000
dvb_video_release
DVB: audio0 play command sended to the audio decoder
DEMUX: SetSource(0)
dtv_property_cache_sync()

[DragontearS]

can someone that has fta working post the same?

[kanber_kav]

SettingsMaker1.2 download
_http://www.zshare.net/download/813990019bbe6944/

Download the list and select the satellite channel.
Create a list of channels for E2.
Send the channel list DreamEdit azboxsa.

[massimo1167]

@The_Ripper: As a first try to use /dev/hdb1 would be great. I'm also in the 'dark' why it would not work right. I know that in the ufs910 world they need devinit as a kernel parameter (Helper app to populate the initial /dev directory with the required devices when they don't exist yet Call this instead of init to set up everything for the real init (using the init-commandline option of the linux kernel ) - I suppose the problem is there - devinit starts at the end init .If we boot tdt-openwrt we need /etc/preinit which do the same but more detailed.

I also miss /proc/progress which is very strange too.

any improvement?

[4@@@@]

The improvement is, that I now extracted the rootfs out of the vmlinux.bin
No I can get deeper in the solving of the problem. In the man pages about ramfs is some hint about device setup.
Stay tuned - I'll tell you, if I fixed the boot from nfs/hdd.