JSC_Sports_On_Technomate

[sat_rrstm]

https://www.satpimps.co.uk/showpost.php?p=755207&postcount=4 53

Thanks,but the strange thing is that @holmroad is talking about a fourth file posted 05/10 :

Sorry guys, but JSC Sports still not working for me, using 4th file!
(this at 1825hrs 5/10)

and I found a newer file than yours here :

http://satpimps.co.uk/showthread.php...727#post753727
posted 2 hours later than yours...
besides I couldn't spot manually the location of your link's post...
--------------------------------------------------------
@bungouk mate,could you please upload files after the latest post on this thread and not in the middle or elsewhere in it?
Thanks for the support,once again. :respect-055:

[holmroad]

I'm using a new laptop on Windows 7 and had to install my USB to stb from scratch!
The other day when Sly Italia was working but not JSC Sports, I had successfully changed portcom from COM 3 to COM 1 as previously - and Sly was working without 'portcom error' showing!
When I reported JSC Sports not opening yesterday the portcom was ok but it was telling me that 'JSC Sports not open' on DOS screen and was therefore constantly timing out.
Today when I tried again, the COM port had reverted to COM 3, as for some reason my lappie had decided to re-install the USB adaptor driver etc!
So I changed it to COM 1 as before - but device manager said COM 1 WAS 'already in use, do I want to continue as it may cause complications etc' - so I said YES!
Despite all this I'm now getting constantly in DOS screen 'Portcom error' so no point in screen printing as thats where I now am!
Help please!

[holmroad]

Rebooted and yipee there they all were - opening fine!
However within 3 or 4 minutes they've gone down again (messages in DOS screen stating '5928 c01 tuner xxxxxxxxxxxxxxx rejected tuner etc' so now again none of JSC Sports 1-10 opening any longer!:respect-051:

[holmroad]

This is what I'm now getting guys!

2010/10/06 11:37:19 3284 s monitor: disabled
2010/10/06 11:37:19 3284 s camd 3.3x: disabled
2010/10/06 11:37:19 3284 s camd 3.5x: disabled
2010/10/06 11:37:19 3284 s cs378x: disabled
2010/10/06 11:37:19 3284 s newcamd: disabled
2010/10/06 11:37:19 3284 s radegast: disabled
2010/10/06 11:37:20 3284 s logger started (pid=5856)
2010/10/06 11:37:20 3284 s resolver started (pid=4540, delay=30 sec)
2010/10/06 11:37:20 3284 s anti cascading: disabled
2010/10/06 11:37:20 3284 s serial: initialized (pid=5044, auto@/dev/ttyS0)
2010/10/06 11:37:22 5044 c01 plain sssp-client 127.0.0.1 granted (tuner, au=0)


Cheers!:respect-055:

[holmroad]

Rebooted again and now this:-

2010/10/06 11:51:51 4664 s 2593 service-id's loaded
2010/10/06 11:51:51 4664 s 36 lengths for caid guessing loaded
2010/10/06 11:51:51 4664 s monitor: disabled
2010/10/06 11:51:51 4664 s camd 3.3x: disabled
2010/10/06 11:51:51 4664 s camd 3.5x: disabled
2010/10/06 11:51:51 4664 s cs378x: disabled
2010/10/06 11:51:51 4664 s newcamd: disabled
2010/10/06 11:51:51 4664 s radegast: disabled
2010/10/06 11:51:51 4664 s logger started (pid=1680)
2010/10/06 11:51:52 4664 s resolver started (pid=504, delay=30 sec)
2010/10/06 11:51:53 4664 s proxy started (pid=1896, server=www.satna.biz)
2010/10/06 11:51:53 4664 s anti cascading: disabled
2010/10/06 11:51:53 4664 s serial: initialized (pid=860, auto@/dev/ttyS0)
2010/10/06 11:51:54 860 c01 plain sssp-client 127.0.0.1 granted (tuner, au=0)

2010/10/06 11:52:28 860 c01 tuner (0603&000000/20F6/34:A393): rejected reader
ident (0 ms)
2010/10/06 11:52:31 1896 p02 connect(fd=4) failed: (errno=1)
2010/10/06 11:52:31 1896 p02 connect(fd=4) failed: (errno=1)
2010/10/06 11:52:31 860 c01 tuner (0500&042400/20F6/2F:7FE0): not open (5273
ms)
2010/10/06 11:52:31 860 c01 tuner (0603&000000/20F6/34:62AC): rejected reader
ident (0 ms)
2010/10/06 11:52:31 860 c01 tuner (0500&042400/20F6/2F:7FE1): not open (2153
ms)
2010/10/06 11:52:33 860 c01 tuner (0603&000000/20F6/34:62AC): rejected reader
ident (0 ms)
2010/10/06 11:52:35 860 c01 tuner (0603&000000/20F6/34:62AC): rejected reader
ident (0 ms)
2010/10/06 11:52:37 860 c01 tuner (0603&000000/20F6/34:62AC): rejected reader
ident (0 ms)
2010/10/06 11:52:39 1896 p02 connect(fd=4) failed: (errno=1)
2010/10/06 11:52:39 860 c01 tuner (0500&042400/20F6/2F:E185): not open (78 m
s)
2010/10/06 11:52:41 860 c01 tuner (0603&000000/20F6/34:3186): rejected reader
ident (0 ms)
2010/10/06 11:52:43 860 c01 tuner (0603&000000/20F6/34:3186): rejected reader
ident (0 ms)
2010/10/06 11:52:45 860 c01 tuner (0603&000000/20F6/34:3186): rejected reader
ident (0 ms)
2010/10/06 11:52:47 860 c01 tuner (0603&000000/20F6/34:3186): rejected reader
ident (0 ms)
2010/10/06 11:52:49 1896 p02 connect(fd=4) failed: (errno=1)
2010/10/06 11:52:49 860 c01 tuner (0500&042400/20F6/2F:E184): not open (78 m
s)
2010/10/06 11:52:51 860 c01 tuner (0603&000000/20F6/34:10F4): rejected reader
ident (0 ms)
2010/10/06 11:52:53 860 c01 tuner (0603&000000/20F6/34:10F4): rejected reader
ident (0 ms)
2010/10/06 11:52:55 860 c01 tuner (0603&000000/20F6/34:10F4): rejected reader
ident (0 ms)
2010/10/06 11:52:57 860 c01 tuner (0603&000000/20F6/34:10F4): rejected reader
ident (0 ms)

[bungouk]

i get that rejected reader sometimes thats when on my tm5400 ihave to enter 9797 on each jsc channel and set the ident to auto then the channel comes on after a few seconds.
Its coz the server wants to use caid 0500 ident 042400.
Regards
Bungouk

[holmroad]

Thanks mate, but even with 9797 I still only get all this:-

2010/10/06 12:38:04 3236 s 36 lengths for caid guessing loaded
2010/10/06 12:38:04 3236 s monitor: disabled
2010/10/06 12:38:04 3236 s camd 3.3x: disabled
2010/10/06 12:38:04 3236 s camd 3.5x: disabled
2010/10/06 12:38:04 3236 s cs378x: disabled
2010/10/06 12:38:04 3236 s newcamd: disabled
2010/10/06 12:38:04 3236 s radegast: disabled
2010/10/06 12:38:04 3236 s logger started (pid=4240)
2010/10/06 12:38:04 3236 s resolver started (pid=5164, delay=30 sec)
2010/10/06 12:38:04 3236 s anti cascading: disabled
2010/10/06 12:38:04 3236 s serial: initialized (pid=3164, auto@/dev/ttyS0)
2010/10/06 12:38:12 3164 c01 plain sssp-client 127.0.0.1 granted (tuner, au=0)

2010/10/06 12:39:08 3164 c01 tuner (0603&000000/20F6/34:ACE2): rejected reader
ident (0 ms)
2010/10/06 12:39:11 3164 c01 tuner (0603&000000/20F6/34:ACE2): rejected reader
ident (0 ms)
2010/10/06 12:39:13 3164 c01 tuner (0603&000000/20F6/34:ACE2): rejected reader
ident (0 ms)
2010/10/06 12:39:15 3164 c01 tuner (0603&000000/20F6/34:ACE2): rejected reader
ident (0 ms)
2010/10/06 12:39:15 3164 c01 tuner (0500&042400/20F6/2F:8313): timeout (7040 m
s)
2010/10/06 12:39:16 3164 c01 tuner (0500&042400/20F6/2F:8313): timeout (7018 m
s)
2010/10/06 12:39:17 3164 c01 tuner (0603&000000/20F6/34:BA43): rejected reader
ident (0 ms)
2010/10/06 12:39:19 3164 c01 tuner (0603&000000/20F6/34:BA43): rejected reader
ident (0 ms)
2010/10/06 12:39:21 3164 c01 tuner (0603&000000/20F6/34:BA43): rejected reader
ident (0 ms)
2010/10/06 12:39:22 3164 c01 tuner (0603&000000/20F5/34:19F4): rejected reader
ident (0 ms)
2010/10/06 12:39:22 3164 c01 tuner (0500&042400/20F6/2F:69D7): timeout (7034 m
s)
2010/10/06 12:39:22 5140 p02 connect(fd=4) failed: (errno=1)
2010/10/06 12:39:22 5140 p02 connect(fd=4) failed: (errno=1)
2010/10/06 12:39:22 3164 c01 tuner (0500&042400/20F5/2F:6996): not open (747
ms)
2010/10/06 12:39:24 3164 c01 tuner (0603&000000/20F5/34:19F4): rejected reader
ident (0 ms)
2010/10/06 12:39:26 3164 c01 tuner (0603&000000/20F5/34:19F4): rejected reader
ident (0 ms)
2010/10/06 12:39:27 5140 p02 connect(fd=4) failed: (errno=1)
2010/10/06 12:39:27 3164 c01 tuner (0500&042400/20F5/2F:6997): not open (51 m
s)
2010/10/06 12:39:30 3164 c01 tuner (0603&000000/20F5/3417C): rejected reader
ident (1 ms)
2010/10/06 12:39:32 3164 c01 tuner (0603&000000/20F5/3417C): rejected reader
ident (0 ms)
2010/10/06 12:39:34 3164 c01 tuner (0603&000000/20F5/3417C): rejected reader
ident (0 ms)
2010/10/06 12:39:36 3164 c01 tuner (0603&000000/20F5/3417C): rejected reader
ident (0 ms)
2010/10/06 12:39:37 5140 p02 connect(fd=4) failed: (errno=1)
2010/10/06 12:39:37 3164 c01 tuner (0500&042400/20F5/2F:2F4D): not open (31 m
s)
2010/10/06 12:39:40 3164 c01 tuner (0603&000000/20F5/34:6D91): rejected reader
ident (0 ms)
2010/10/06 12:39:42 3164 c01 tuner (0603&000000/20F5/34:6D91): rejected reader
ident (0 ms)
2010/10/06 12:39:44 3164 c01 tuner (0603&000000/20F5/34:6D91): rejected reader
ident (0 ms)
2010/10/06 12:39:46 3164 c01 tuner (0603&000000/20F5/34:6D91): rejected reader
ident (0 ms)
2010/10/06 12:39:48 5140 p02 connect(fd=4) failed: (errno=1)
2010/10/06 12:39:49 3164 c01 tuner (0500&042400/20F5/2F:2F4C): not open (2073
ms)
2010/10/06 12:39:50 3164 c01 tuner (0603&000000/20F5/34:EC2C): rejected reader
ident (0 ms)
2010/10/06 12:39:52 3164 c01 tuner (0603&000000/20F5/34:EC2C): rejected reader
ident (0 ms)
2010/10/06 12:39:54 3164 c01 tuner (0603&000000/20F5/34:EC2C): rejected reader
ident (0 ms)
2010/10/06 12:39:56 3164 c01 tuner (0603&000000/20F5/34:EC2C): rejected reader
ident (0 ms)
2010/10/06 12:39:57 5140 p02 connect(fd=4) failed: (errno=1)
2010/10/06 12:39:57 3164 c01 tuner (0500&042400/20F5/2F:64E8): not open (41 m
s)
2010/10/06 12:40:00 3164 c01 tuner (0603&000000/20F5/34:3B0A): rejected reader
ident (0 ms)
2010/10/06 12:40:02 3164 c01 tuner (0603&000000/20F5/34:3B0A): rejected reader
ident (0 ms)
2010/10/06 12:40:04 3164 c01 tuner (0603&000000/20F5/34:3B0A): rejected reader
ident (0 ms)
:respect-050:

[bungouk]

I will try mine when i get in from work.
Can other people tell me if jsc open for them as i cant check at the min.

[pauls]

jsc not working for me, tried the 9797 (auto) thing but after it has saved if i try 9797 again it has gone back to one of the other options,
tried doing 9797 (auto) and saved 6 times in a row but it still goes back to another option.
pauls.

[pricey]

I can't get any JSC to open. The most frequent message I get is 'STOP POLL'. I have tried entering 9797 by the remote (I assume that is what is meant!)but there is no difference. Any chance for Fridays games??

[taffykid]

along with Cilquer ici have any of you tried the programs that Powercisco posts in the Humax section, they do almost the same thing and he updates often. i've found that most of his updates work on my tm 6800hd non super when servers are up . might be worth a look.

[liaqatali]

hi JSC not working today

[grin2]

ditto

[bungouk]

i have been trying to get it to work again but struggling to find a server that works at the mo.
Will post new file as soon as i get one to work.
Sorry people

[Learning]

@ bungouk
As and when you can m8. Those that want it quicker should maybe have a go at it themselves. And if people were to read the log as they loaded cliquer they would see why they arent connecting.
Thanks for your efforts m8.

[grin2]

read the log? dont you know how many oldies on here mate (me included). the only log i know was in my kecks when a police dog chased me at the match. might as well be in arabic

[holmroad]

read the log? dont you know how many oldies on here mate (me included). the only log i know was in my kecks when a police dog chased me at the match. might as well be in arabic

Well put my sarcy friend - I totally agree with you mate!!:respect-055:

[FOX]

I have been lost on this lenghty threads. Does anyone get JSC? if yes which version?
Tks

[grin2]

all down at mo. as far as im aware. whe the same thread is used for weeks, it is sometimes easy to get lost.

[holmroad]

Problem is that our trusty comrade Compass started this thread with his 'revolutionary' file to enable us to open exciting new channels on the TM's - and the same thread has been used ever since, with many many updates, all thanks to both Compass in the past and now our new hero Bungouk!!:respect-055: