Enigma 2 by The_ripper - TEST -

**SAUS04** · 05-10-2010, 10:17 AM

How far off are we at getting CCCam running with this? am holding off until this is working. I would be happy to test the beta once this is implemented. Is there any progress on this E2 team :respect-055:

**bawin** · 05-10-2010, 10:32 AM

I put the new driver and I do not I have a satellite channel search engine and fixed to the Astra I have right now. In contrast with the old driver if I was looking for channels.

**Kuhnigotchi** · 05-10-2010, 10:54 AM

Originally Posted by bawin

I put the new driver and I do not I have a satellite channel search engine and fixed to the Astra I have right now. In contrast with the old driver if I was looking for channels.

as i understand you have to make the channel search with the OLD driver. and AFTER the search is finished, you can replace the old driver with the new one

**hfmls** · 05-10-2010, 11:00 AM

Originally Posted by simon30000

zap speed is same as dm500 on 28.2 fta ,epg gets alittle confused with itself ,is fine though, volume when u turn it down on remote ,it turns itself up again, slighty to much colour.
is a ok though .and chanel list seems unlimited like dm500/800
congrats to the team :respect-054::respect-054::respect-054:
havent tested 30w yet
me daughter is watchin cbeebies ,yep in azbox e2

dm500 zapping speed

that's pretty awsome. faster then dm800.

**andriorn** · 05-10-2010, 11:10 AM

Originally Posted by kinace

exactly the same with astra 2 28e.

old driver - full channel scan and epg

new driver - no a/v with the scanned channels, tried rescan and cannot get a lock with the same transponders.

Same here! any solution?

**hfmls** · 05-10-2010, 11:11 AM

some users said with previous driver you could do the channel scan, and with new driver you could watch FTA channels.

or you can just use new driver and use a normal enigma2 channel list.
send it via dreamset or so.

**pazzoider** · 05-10-2010, 11:16 AM

Hello to everybody

I have a motorized dish and i've sent to the box "vhannibal motor channel list for e2".
But reload command does't go well.
I rebooted the box but i can't see the new channel list?
My question is:
For this version of e2 is possible to send customized channel lists?
Or is possible only to activate "default channel list" activating it on the box menu?
Other question:
If i have a motorized dish, is possible to see fta channels with default channel list?If yes, what i have to configure to make it possible?

Thanks a lot

**simon30000** · 05-10-2010, 11:41 AM

to get chans working with new driver
u could send an updated e2 chanel list ,i used dreambox edit
u can do this
dm500 chan list,open up dbe open chan list change from type2,e1 to type 4 e2 then save ,then send over to az ,works a treat

**andriorn** · 05-10-2010, 01:05 PM

Originally Posted by simon30000

to get chans working with new driver
u could send an updated e2 chanel list ,i used dreambox edit
u can do this
dm500 chan list,open up dbe open chan list change from type2,e1 to type 4 e2 then save ,then send over to az ,works a treat

I uploaded a channel list from DM800 and i got audio/video

But i can't seem to get ITV HD and BBC HD.....
anyone know when we can expect CCcam ?

**DrChaos** · 05-10-2010, 01:25 PM

Please, give us DVB-C users some hope... All this fast channel switching sounds so good...

**[0_o]** · 05-10-2010, 01:40 PM

Anybody tested some 4:2:2 feeds or HD channels just to see what happens?

**hfmls** · 05-10-2010, 02:16 PM

Originally Posted by DrChaos

Please, give us DVB-C users some hope... All this fast channel switching sounds so good...

i'm almost sure other tunners support will only come after current dvb-s2 s stable enough.

**T0rca1950** · 05-10-2010, 02:26 PM

@RogerThis, DragontearS,pr2,kinace....

Did you managed to get picture? if yes, please tell what did you do to get it.

Thank you.

**cicciotommaso** · 05-10-2010, 02:55 PM

Hello I am new I can not set the decoder, I have a dual feesds hotbirth 13 ° and 19 ° astra with two runs, it tells me line failure, please help me, are in trouble, and another thing I wanted to ask if you could put the pluging of the DM800 ?????

**DragontearS** · 05-10-2010, 03:35 PM

Originally Posted by T0rca1950

@RogerThis, DragontearS,pr2,kinace....

Did you managed to get picture? if yes, please tell what did you do to get it.

Thank you.

Here's nothing new. I've tried to use previous driver to make channel search and then i put the new one... but nothing. New driver just doesn't work with my premium... If anyone knows how to do please talk.. for CCcam i use CCcam 2.1.1 on my Azs (with original fw). It's only a folder with everything inside.... I see no reason for not working just with a script even in enigma fw.. its a CCcam.mipsel so it would work... dvbapi_module was rewritten for using with original fw but with E2 maybe it just works, or I'm wrong? Tonight I will try.. Now I've reloaded original fw, but tonight a new session of benchmarks.. :respect-048:

**numark0504** · 05-10-2010, 03:59 PM

with the new driver, my elite has no audio and no video on astra 19,2...the epg does not work any more and the clock will not be set automaticly....with the old driver the clock an the epg work.

ERROR MESSAGE:
no data on transponder
timeout reading PAT

has someone an idea?

**andriorn** · 05-10-2010, 04:15 PM

Originally Posted by andriorn

I uploaded a channel list from DM800 and i got audio/video

But i can't seem to get ITV HD and BBC HD.....
anyone know when we can expect CCcam ?

I used DM800 channel list and dreambox edit to transfer to box an after that i got audio and video with new driver on Astra2

**[0_o]** · 05-10-2010, 04:35 PM

@everybody

Try to download any dreambox channel list (from a DM800, for exemple), transfer it to azbox using dreambox edit and then try again and see if you got audio/video (like andriorn did).

Regards