Down for me it says:- login failed for user '......'
pauls.
Down for me it says:- login failed for user '......'
pauls.
Last edited by pauls; 22-09-2010 at 07:41 PM.
Jsc+1 on Hotbird 100% ok
Jsc+2 on Hotbird 100% ok
Jsc+3 on Hotbird 100% ok
Jsc+4 on Hotbird 100% ok
Jsc+5 on Hotbird 100% ok
Jsc+6 on Hotbird 100% ok
Jsc+7 on Hotbird 100% ok
Jsc+8 on Hotbird 100% ok
Jsc+9 on Hotbird 100% ok
Jsc+10 on Hotbird 100% ok
With credit from compass original files i have updated.
2nd update
Sky italia now working
The king is dead!Originally Posted by bungouk
Long live the king!!
In the past, the Technomate and Humax used very similar emu's. With this in mind, is there a way to open the Jsc channels on Hotbird and possibly sly Italy?
Any help appreciated.
pixey
as Compass dropped support for Technomate, probably the best way for SSSP is using Fausto?
who is bungouk. Hasn't he done the sky italia file?
The file is working thank you boungouk for suport
Giga, is it possable to open JSC sports with Fausto, as it won't work for me?
pixey
dont work for me etheither on sky or jsc
Bungouk
So these Bungouk files are actually working guys?
Just that as never heard of him its come as a LOT of a surprise - and you really cant be too careful on these occasions?:respect-050:
Had a good fiddle around. Nothing on either @ 11.15AM
sly is ok jsc no @11:38
archie
Just tried the latest from bungouk with no luck although this maybe due to a 10 metre run from PC via null modem to Technomate.
BTW, it's good that we have another helper prepared to give his time in bungouk.:bravo-009:
Best wishes from,
Gibson.
The Italian provider - picture is constantly breaking up as CILQUER ICI
is updating. JSC works a bit better, but is still breaking up.
Using Technomate 5400 and latest patch.
@Gibson,
lower baudrate in Technomate and in the properties of the used com port on computer to 57600, this should allow further distances
lower programs running on the PC or using internet. Check timings in DOS box.
Hi Giga. I'm using my old Technomate 1500 taken out of wraps as my DM800, without CS, is practically a FTA box.
Not sure it's possible to change the baud rating on the old beast. If it is and you know how I'd be pleased to know.
Best wishes from,
Gibson. .
don't have that info, check menus otherwise try with lowering just baud rate on computer. Switch off computer and TM-1500 (not standby). Then start computer, Fausto and connect serial (in program) then start TM-1500 and switch channels
I keep getting timeouts.
Posting Permissions
Reply With Quote
Bookmarks