Enigma 2 by The_ripper - TEST -

[dutchmatrix]

Guys maybe im too dumb to understand but isn't this just a temporary proof of concept?
So just wait for the "beta" before saying this doesn't work or can we have this......

Go play with it, start telnet and try all the files and see what it does.
We know the tuner gives no audio/video yet but maybe ther's a movieplayer somewhere that can be started.

I think my whole evening will be occupied with playing with it......thats part of why i bought this box in the beginning.

Thanx Ripper and friends...so far

[VFL]

hello
i have problem it not show on tv after update
it only display show geeko : p

what can i do now?

[pegaman]

hello
i have problem it not show on tv after update
it only display show geeko : p

what can i do now?

first of all read previous pages...

your answer is here

https://www.satpimps.co.uk/showpost....&postcount=562

[MoRpHiUS_x]

hello
i have problem it not show on tv after update
it only display show geeko : p

what can i do now?

1. Load this patch.bin ( Enigma 2 ) file on FAT32 formatted USB Memory Stick
2. Turn Off Your AzBox HD Device, put USB Memory Stick inside and Turn on AzBox HD Device.
3. Follow the procedure USB Update on the screen, (patch version: 1.0.21 E2 by TheRipper, press OK, wait to finish, reboot - don't remove stick !)
4. Start AZUp , write IP adress of AZBox (see VFD), then click on Update button on AZUp, wait and follow message on AZUp and VFD, when all done - wait for reboot msg on VFD and then remove USB stick

[VFL]

1. Load this patch.bin ( Enigma 2 ) file on FAT32 formatted USB Memory Stick
2. Turn Off Your AzBox HD Device, put USB Memory Stick inside and Turn on AzBox HD Device.
3. Follow the procedure USB Update on the screen, (patch version: 1.0.21 E2 by TheRipper, press OK, wait to finish, reboot - don't remove stick !)
4. Start AZUp , write IP adress of AZBox (see VFD), then click on Update button on AZUp, wait and follow message on AZUp and VFD, when all done - wait for reboot msg on VFD and then remove USB stick

well i have some it not show on TV just display nothing show on TV

[Dennis.Ringler]

hello
i have problem it only display show geeko : p
I not see IP adress of AZBox

Can I help me?

[jamesjay]

+1

i think it's reasonable to ask for something that was possible one month ago
according to this video: http://www.youtube.com/watch?v=ht42JCzeeaI

we are talking about a simple command-line tool to play a file (just like the one shown in the video), not a full MediaPlayer ...

You are not being constructive but pressurising the developers (that are not asking for or getting payment for their work) to release their work in bits before they are happy with it or it as even reached Beta stage.

In fact not only are you not being constructive but you are not even being reasonable, what would happen if firmware was released that corrupted and damaged your box beyond repair, the comments made by members after the recent downloaded when they thought they couldn't get the original opensat firmware back on their boxes is enough to prove that patience (in other words waiting) is best for all.

Maybe you should consider reading some of the posts in other topics rather than just this one, you never know you might find you are able to use your knowledge to help another member.

[gheos]

hello
i have problem it only display show geeko : p
I not see IP adress of AZBox

Can I help me?

Connect with cable LAN
Enable DHCP on the router

[Dennis.Ringler]

Connect with cable LAN
Enable DHCP on the router

Hello
I have Elite HD with cable Lan Connect and on the router is DHCP Enable.
On the DHCP list not found

[gheos]

reboot with the USB stick connected with the E2 firm, it should go into Recovery Mode, and show the IP on the VFD.

Launch AzUp and reinstall E2 firmware.

[VFL]

it some me at Dennis nothing show still display geeko : p

[Dennis.Ringler]

I have started AzUP.
USB stick with E2 at the Azbox I have also formatted FAT32 USB stick again.

But I always get only geeko: P appears. and my router refers to Azbox not so no IP address.

[drjohn]

You are not being constructive but pressurising the developers (that are not asking for or getting payment for their work) to release their work in bits before they are happy with it or it as even reached Beta stage.
...

I'm not sure you understand what I'm trying to say.

I don't want the devs to quickly release another firmware with some added functionality.

I just think that maybe there is a way to play videofiles with THIS firmware
and I also think everybody here would be very happy if they could do that, that's all.

[VFL]

Still now i have try not succes it, i was make file on usb e2 then power off the cable of azbox elite, put USB, then format applicate after done then patch press ok,after reboot then it show only geeko. and nothin happned

[The_Ripper]

@VFL

What USB stick do you use, manufacture/size,is it in FAT32 ?
Are you shure it's patch.bin not PATCH.BIN filename ?
Can you maybe try another router, from some friend who can borrow to you ,just you can try.

[VFL]

@VFL

What USB stick do you use, manufacture/size,is it in FAT32 ?
Are you shure it's patch.bin not PATCH.BIN filename ?
Can you maybe try another router, from some friend who can borrow to you ,just you can try.

also i did make it FAT 32 and put on azbox after show screen it blue like 5 option and i make it first format applicate aftre done then USB.it just rebooting then update it still 100% done they by selfh reboot then it on diplsay geeko : p

my USB i have 4 different
kingstone 4GB
Scan Disc 16GB
and 2 of 2GB

[Dennis.Ringler]

So I got a cheap USB giveaway. With 255MB is enough for updates. So the patch.bin is spelled correctly. I have a router and Vodafone had already tried that with another and with switch but can not get IP.

[The_Ripper]

@VFL, Dennis.Ringler
When you tried with different USB sticks, did you poweroff Azbox then again PowerON, multiple times with same stick ?

It's stupid if dhcp script cant get IP address from router ...

[antrabe]

How it works this beta video and audio is working? i would like to test

[VFL]

@VFL, Dennis.Ringler
When you tried with different USB sticks, did you poweroff Azbox then again PowerON, multiple times with same stick ?

It's stupid if dhcp script cant get IP address from router ...

ofcourse many USB not succes then what can i do.
ping of IP what i know not answere
i was try old fim for patch version 5020 it notthing happned just geeko : p

maybe it have different Hardware or all the some!