Enigma 2 by The_ripper - TEST -

[chepejohn]

@ ripper ...top man all the best from ROI

[aoryx]

u know u killed these thread :(
anyway got some good news

Hi, I made new video to keep informed on my progres with Enigma 2 on AZBox HD platforma.

SD channels OK

EPG OK

DiSEqC 1.2 (1.0 and 1.1 also ok)

Now trying to get a picture on HD channels, Teletext, coded channels and after that come the multimedia part of AZBox HD.

http://www.youtube.com/watch?v=z5ntg...mbedded#at=277

[MalMen]

nice video... but its from 14 april... :\
If that is the progress of 14 april why not come in the last release ?
May be fake no ?
Only suposing... i ill not say fake / true anymore.... only install to see
But is on good way this progress

[Mate]

u know u killed these thread :(
anyway got some good news

http://www.youtube.com/watch?v=z5ntg...mbedded#at=277

This is old fake video.. a saw it in legendary hfmls E2 thread.. dont believe this info.

[devilred]

Hello everyone. I wanted to know how to continue developing our enigma2 AZBox. thanks

[edu1971]

any news?

Thanks for everything you do, all that you are involved in this project.



thanks and greetings from Cadiz (Spain)

[nakata]

Recovery procedure
__________________


* For all people which have a problem with fleshing Enigma 2 in AzBox , where installation stop ~58% and now have a BOOTING message on display.

You will need :

- Application Acronis True Image

- E2Backup.tib

- External HDD case with IDE controller ( or if You are working on PC, Motherboard which have IDE controller ) .

Take the DOM from AzBox and connect it with IDE connector from Your external usb case for HDD .

Connect the red wire from power cable ( 4-pin Molex connector ) from case ( +5V ) ( picture: Molex and pwrcom ) with right oriented pin on connector which is on DOM - pictures DOM1 and DOM2

Connect USB cable from the HDD case with Your PC.

Now, startup Acronis True Image application, and choose Recovery from the menu on right side - picture 1

Choose Disk Recovery on the top of the window and load file E2Backup.tib and press next - picture 2

Choose Recover whole disk and partition and press next - picture 3

Check-all whole Disk, so it means two partitions : Ex** and Linux Swap and press next - picture 4

Choose on which disk You will restore content, in our case DOM, and press next - picture 5

Commit with OK - picture 6

Choose Proceed - picture 7

Wait for few minutes that process complete - picture 8

When the restore of data and partitions finish, press Ok - picture 9

now You can exit from application, 'Safely' eject Your external USB HDD, in our case DOM.

Disconnect usb cable, and put back the DOM on AzBox, turn on AzBox and wait for 20 seconds that E2 boot.

Now you can take a look on enigma, and when You decide to go back on Official version of Firmware, that You can do with plugin from DDdamir.

Installation od DDamir plugin is described in another tutorial.



hxxp://rapidshare.com/files/407099608/Recovery.rar.html

rgs,

please please can someone upload the file again?

[gheos]

please please can someone upload the file again?

Link megaupload
http://www.megaupload.com/?d=WEA4BJ4R

[nakata]

Link megaupload
http://www.megaupload.com/?d=WEA4BJ4R

thanks a lot :bowing-036:

[terzic]

NAKATA, do you recovery your box ?

[nakata]

the problem is relevant to a friend and we will try to resolve it the following Sunday. i will inform you about the results

[nakata]

NAKATA, do you recovery your box ?

yes thanks to telesat the box is alive and working with original FW

[botti]

Thanks for the great work that has been done,
However, we're a bit messed up with all the posts running around enigma2 on azbox
Do u have a clue if in the comming days we'll start using E2 on this box
Cheers

[ebro]

In the coming days.... No. In the coming months...... maybe.

[hfmls]

i think we probably have news in this week maybe next one.
(ONLY MY OPINION)

[aspava]

:smilielol5:

[vrlika]

thumbs up to the guys working on E2 but I am not installing it untill I see its stable enough .
regards

[medmed]

more weeks , ....E2 is ok

[botti]

When u say more weeks, based on what argument or info!

[PsiDOC]

Have patience. It'll be released when it's ready.
I am sure that all concerned in the development of this want to release a 100% finished and bug free firmware. This can take months to get right. <<--- NOTE I said CAN take months. I don't know how the development is going or for that matter the developer(s).
What would you rather? A good release that you have to wait for, or a rushed buggy release that doesn't work properly and yet more moaning on the forum.

Me? I'll wait for the good release.

Psi