Enigma 2 by The_ripper - TEST -

[single]

Looks like tuners is not a problem, then go head.

Others chips are missing on this post's too, like scart (avs), ethernet, ic2 chips bla bla...

:king-041:

[bawin]

Well, if I can help decorificador Azboxhd elite motherboard information and tuners.

Motherboard: DRACO_M / B: Rev3.00

Tuners:

Draco_DVB-S-S2_REV 3.00
DNBU24512ICC LEAD FREE
080514 EAAATR

--------------------------------------------

SAMSUNG
TM10_DVB-C2_REV3.00
DNQS44CPP101A
Demodulation IC STV0297E
- - - - - - - - - - - - - -
090621 HAT.-LF
2009.04.02

[sattommy]

Looks like tuners is not a problem, then go head.

Others chips are missing on this post's too, like scart (avs), ethernet, ic2 chips bla bla...

:king-041:

I believe all the audio and video will be accessed through sigma audio video calls. Same goes for the demux, but dvbapi needs to made to work with this.

Ethernet is also provided by the kernel. I think main thing to build now is the dvbapi part, with the demux and sending the audio video through sigma chip.

Any progress on this the_ripper?

[moicas3004]

Any new Info on development?

when you have a second test version please release it, so i can test it.

[scalpel]

Think about create silent az e2 team and donate function.

[terzic]

"Recovery procedure
__________________


* For all people which have a problem with fleshing Enigma 2 in AzBox , where installation stop ~58% and now have a BOOTING message on display.

You will need :

- Application Acronis True Image

- E2Backup.tib

- External HDD case with IDE controller ( or if You are working on PC, Motherboard which have IDE controller ) .

Take the DOM from AzBox and connect it with IDE connector from Your external usb case for HDD .

Connect the red wire from power cable ( 4-pin Molex connector ) from case ( +5V ) ( picture: Molex and pwrcom ) with right oriented pin on connector which is on DOM - pictures DOM1 and DOM2

Connect USB cable from the HDD case with Your PC.

Now, startup Acronis True Image application, and choose Recovery from the menu on right side - picture 1

Choose Disk Recovery on the top of the window and load file E2Backup.tib and press next - picture 2

Choose Recover whole disk and partition and press next - picture 3

Check-all whole Disk, so it means two partitions : Ex** and Linux Swap and press next - picture 4

Choose on which disk You will restore content, in our case DOM, and press next - picture 5

Commit with OK - picture 6

Choose Proceed - picture 7

Wait for few minutes that process complete - picture 8

When the restore of data and partitions finish, press Ok - picture 9

now You can exit from application, 'Safely' eject Your external USB HDD, in our case DOM.

Disconnect usb cable, and put back the DOM on AzBox, turn on AzBox and wait for 20 seconds that E2 boot.

Now you can take a look on enigma, and when You decide to go back on Official version of Firmware, that You can do with plugin from DDdamir.

Installation od DDamir plugin is described in another tutorial.



hxxp://rapidshare.com/files/407099608/Recovery.rar.html

rgs, "


Again " booting " ! what now ?

[sattommy]

"Recovery procedure
__________________


* For all people which have a problem with fleshing Enigma 2 in AzBox , where installation stop ~58% and now have a BOOTING message on display.

You will need :

- Application Acronis True Image

- E2Backup.tib

- External HDD case with IDE controller ( or if You are working on PC, Motherboard which have IDE controller ) .

Take the DOM from AzBox and connect it with IDE connector from Your external usb case for HDD .

Connect the red wire from power cable ( 4-pin Molex connector ) from case ( +5V ) ( picture: Molex and pwrcom ) with right oriented pin on connector which is on DOM - pictures DOM1 and DOM2

Connect USB cable from the HDD case with Your PC.

Now, startup Acronis True Image application, and choose Recovery from the menu on right side - picture 1

Choose Disk Recovery on the top of the window and load file E2Backup.tib and press next - picture 2

Choose Recover whole disk and partition and press next - picture 3

Check-all whole Disk, so it means two partitions : Ex** and Linux Swap and press next - picture 4

Choose on which disk You will restore content, in our case DOM, and press next - picture 5

Commit with OK - picture 6

Choose Proceed - picture 7

Wait for few minutes that process complete - picture 8

When the restore of data and partitions finish, press Ok - picture 9

now You can exit from application, 'Safely' eject Your external USB HDD, in our case DOM.

Disconnect usb cable, and put back the DOM on AzBox, turn on AzBox and wait for 20 seconds that E2 boot.

Now you can take a look on enigma, and when You decide to go back on Official version of Firmware, that You can do with plugin from DDdamir.

Installation od DDamir plugin is described in another tutorial.



hxxp://rapidshare.com/files/407099608/Recovery.rar.html

rgs, "


Again " booting " ! what now ?

get a serial to ttl adapter....

[pascha99]

some more hardware-infos:

Network-chip:
Realtek RTL8201CP
_xxx.harerod.de/centipad/do***ents/RTL8201cp_121_.pdf

Boot flash:
Eon EN29LV640B-90TIP 64mbit(8MB)
_hxxp://pdf1.alldatasheet.co.kr/datasheet-pdf/view/207730/EON/EN29LV640B-90TIP.html

SATA-to-PATA bridge:
Marvel 88SA8052 (SATA 3 Gb/s to PATA 133)

Hdmi-Transmitter
-Silicon image SIL9030
_xxx.datasheet.in/datasheet-html//I/L/SIL9030_SiliconImage.pdf.html

-Silicon image SIL9134 (Premium+ only)

DDR-SDRAM 512mbit(64MB)
-Hynix HY5DU121622DTP-D43
_xxx.hynix.co.kr/datasheet/eng/consumer/details/consumer_02_HY5DU121622DTP.jsp?se archType=2&menuNo=1&m=2&s=2&RK=02 &RAM_NAME=

-Zentel a3s12d40etp (Premium+)

common interface controller
-STARCI V2.2
_xxx.inctech.co.kr/inctech2/product/StarCI_Brochure.pdf

-STARCI2WIN V1.1 (Premium+)
_xxx.megaupload.com/?d=9TTIBDDM

driver(sh4) for both,see here:
_hxxp://gitorious.org/open-duckbox-project-sh4/tdt/commit/4eac4a45bbac9eee336b320005b2ce3ba 7756f98

multiplexer bus-switch
IDT IDT74CBTLV16292
_xxx.datasheetdir.com/IDT74CBTLV16292+download

USB 2.0 Host Controller
Via VT6212L
_xxx.microdesignum.cz/_d/via-vt6212l.pdf

ISDB-T Frontend only brasil
Samsung DNVS22CXP241A Elite/Premium
90507XBG demod




About connexant demod-chips.
In the manual for a LG frontend,you can see a "little"more,
how the work.
_xxx.haluyatech.com/down/lgtunner/s2TDQR-C005F.pdf

[MickeySa]

VFD, IR and Ethernet are things which already working !!!

So why some of You mentioning ethernet drivers ?

It is working normally, and even it is faster in transfer of files, than on Official AzBox Firmware......

[massimo1167]

VFD, IR and Ethernet are things which already working !!!

So why some of You mentioning ethernet drivers ?

It is working normally, and even it is faster in transfer of files, than on Official AzBox Firmware......

Thanks for your information, are You able to report the status of the project?
In last days we have heard many rumors from people who reported significant progress confided by coder or insider E2 project.
I'd like to ask You (if You can) to report the status of the project:
- What is already working (since the last alpha public release)
- What's not working, but people are working on.
- what's not working and nobody start to work on.
- The_ripper said:

Many Python code is disabled in mytest.py , Harddisk.py is used from Sh4 build, etc ...
so guys who wants/know Python can start playing/repairing because it want work with default Python code for Dreambox ..

I think that team want to publish sources. Is true?
- If is true, when?
- Last important question: who are the components of the project, some of them we know, others have insights (maybe), but it is possible to know at present who are the people of this phase of the project?

Thanks for all

[4@@@@]

I think we have to give them some time. I also offered The_Ripper to use our git. We are ready for it, so let's wait. I'm working on some files to be adapted on OE to have a azbox specific files, like linux-azbox.bb. At the moment the build kernel is not booting via tftp - but I will get it to work.
It is very important that a lot of coders and Python specialist will have access to the toolchain to support the project.
Maybe I can offer today some stuff to start.

[massimo1167]

I think we have to give them some time.

Yes You are right, my intention wasn't to increase the pressure(I didn't ask them about time to finish or time to next release, I know, they are approaching E2 as hobby althoght they are very good coders, so for this reason they can't work all time on the project), but only to clarify the situation, because someone make confusion.

[4@@@@]

At the moment only the four files of The_Ripper are available but we can put more in it.

git clone git://kf-repos.de/oe-azbox.git
( "git pull" to get updates if any available)
make -f Makefile-opendreambox-1.5

I will put the azbox specific stuff in it later. I will just modify the linux-dm800.bb and put the right path fot the kenerl source in it.

The original Makefile hast dm8000 acitivated - is there a reason for this?

[4@@@@]

Added a simple linux-azbox.bb
no you can use
bitbake -c compile - b ../openembedded/packages/linux/linux-azbox.bb
to build the kernel. No additional Patches at the moment (are there any missing yet?) and you first have to build the crosscompiler. It is possible to link an existing to build/tmp/cross/bin.

[moicas3004]

VFD, IR and Ethernet are things which already working !!!

So why some of You mentioning ethernet drivers ?

It is working normally, and even it is faster in transfer of files, than on Official AzBox Firmware......

yes, in my tests the ethernet is working much faster than in original firmware.

[moicas3004]

At the moment only the four files of The_Ripper are available but we can put more in it.

git clone git://kf-repos.de/oe-azbox.git
( "git pull" to get updates if any available)
make -f Makefile-opendreambox-1.5

I will put the azbox specific stuff in it later. I will just modify the linux-dm800.bb and put the right path fot the kenerl source in it.

The original Makefile hast dm8000 acitivated - is there a reason for this?

I tryed to get the files but is gives an error conection time out

i have tryed several times.

sorry, already resolved

[MickeySa]

At the moment only the four files of The_Ripper are available but we can put more in it.

git clone git://kf-repos.de/oe-azbox.git
( "git pull" to get updates if any available)
make -f Makefile-opendreambox-1.5

I will put the azbox specific stuff in it later. I will just modify the linux-dm800.bb and put the right path fot the kenerl source in it.

The original Makefile hast dm8000 acitivated - is there a reason for this?

Hello ,

edit it from dm8000 to dm800

and for all other people, please consider the true news, only from the_ripper, telesat and me .

As You can see, there is no need that some persons spread rumors or news which are not true. We are on forums, like You guy's, and we are watching. So , as something new appear You will have information.

Also, thanks to all of You for supporting the ripper, as he is really doing amazing job, also thanks for support us ( telesat, me and other guy's involved in project ).

[4@@@@]

Thanx!
Well it is edited a while ago just git pull.
We should also modify openembedded/conf/machine/dm800.conf to azbox.conf and put the wanted PREFERRED Versions. and kernel-modules. At the moment I have no idea which they are.

[moicas3004]

Hi, i follow the steps, with git, just fine but the make file gives me this error:

miguel@miguel-desktop:~/oe-azbox$ make -f Makefile-opendreambox-1.5
mkdir -p /home/miguel/oe-azbox/dm800/cache
mkdir -p sources
mkdir -p /home/miguel/oe-azbox/dm800/build
mkdir -p /home/miguel/oe-azbox/dm800/build/conf
mkdir -p /home/miguel/oe-azbox/dm800/build/tmp
git clone -n git://git.opendreambox.org/git/openembedded /home/miguel/oe-azbox/dm800/openembedded
fatal: destination path '/home/miguel/oe-azbox/dm800/openembedded' already exists and is not an empty directory.
make: ** [/home/miguel/oe-azbox/dm800/openembedded/.git] Erro 128

[4@@@@]

cd /home/miguel/oe-azbox/
mv dm800 _dm800
make -f Makefile-opendreambox-1.5

The problem is that git is not amused that there is a directory.
After OE is finished you can
cp -rd /home/miguel/oe-azbox/_dm800/openembedded/packages/linux/linux-azbox* /home/miguel/oe-azbox/dm800/openembedded/packages/linux/

To build the kernel alone (but you must have the crosscompiling stuff before)
cd ~/oe-azbox/dm800/build
bitbake -c compile -b ../openembedded/packages/linux/linux-azbox.bb

I'll fix this, that it is right in the git with _ .

EDIT: fix done