Sbcl+wsp_Nova_CY_fix

[^^COMPASS^^]

on the second image
of sbcl1.0i

you have selected emu

tick the following

auto start
& debug

make sure Vplug is active (it should be ticked)

also Show monitor
look to see if the check boxes are Ticked
Active (won't work if it not ticked)
Auto ECM (ticked or un ticked doesn't matter)
Auto Pmt (ticked or un ticked doesn't matter)
Auto Cat (ticked or un ticked doesn't matter)

are you sure you are using the correct sbcl & wsp for Nova CY & bulsat the reason i say this is airliquide wsp was in the zip that opens c+ned 19e & doesn't include the special plugin to decrypt Nova & Bulsat ecm's Caid 0604
If your unsure delete it and re download it from post 1 in this thread & update the v-Keys last attachment in this thread.

It is also important to select the correct comport the same as you would use for your Darkman loader.
I'm using 307p for Tm1500 ci super works well with sssp

[sightworthy]

I have been trying to get this working for a few days now , with three computers windows 7 64 and 32 also XP.
I have a Technomate 6900 hd patched and with sssp turned on and have set the Technomate Edit Filter to 0622 000000 .
But i can only get it to work for about 30 seconds.
Any advice would be most welcome.

Sightworthy

[^^COMPASS^^]

Nova Cyprus Next key 06 Updated 18-04-2010 7th


Bulsat ok
Nova CY ok


Unpack & copy and paste in sblc plugins folder v_keys

[^^COMPASS^^]

Nova Cyprus Next key 08 Updated 18-04-2010 8th


Bulsat ok
Nova CY ok


Unpack & copy and paste in sblc plugins folder v_keys

[kegnkiwi]

hi compass thanks for your input, just one quick question before I play today, in post one the cy and bulsat fix when I run sblc it came back with libeay32.dll is missing from your pc. Now I have found another version of this file maybe the canal Nl file and it has the libeay32.dll file in it. Would you know if they are interchangeable or is there something specific in each.

[kegnkiwi]

Just to thank compass I have managed to get Bulsat clearing so the libeay32.dll is generic. Many thanks, now to get nova clearing and write a tut.

ki

[^^COMPASS^^]

Nova Cy Is down atm
ACTIVE KEY 06 currently unknown
NEXT KEY 08

we wait for keys

[^^COMPASS^^]

Nova Cyprus Next key 06
& Active Key 08
Updated 19-04-2010 1st


Bulsat ok
Nova CY ok


Unpack & copy and paste in sblc plugins folder v_keys

[eddieaok]

Couple of quick questions will this work with the new CCcam patches I have 716P.
How do you enable SSSP with this patch.
When I first installed vplug for Nova Cy libeay32.dll was missing to correct this I pasted it into the plugins folder?
Is this ok.
At the moment I am getting green connected but com port not found
Ed

[pauls]

Hi been on with this for a few days now, got everything up and running, still no picture, only thing i can see is on SBCL there is no vplug tab (see pics), i,ve reinstalled 6 or 7 times still the same, any idea's
regards, pauls.
(TM 5400 ci+ usb s/w 176p Mar 23 2010)

[^^COMPASS^^]

Bulsat Next key 04
& Active Key 02
Updated 20-04-2010


Bulsat ok
Nova CY ok


Unpack & copy and paste in sblc plugins folder v_keys

[j@mes]

@pauls

This would suggest there is no Plugin folder in the sbcl Directory.

vPlugin tab should appear next to sbcl on the top left.

Suggest you reinstall sbcl and wsp from the first post. Page 1 of this thread.

https://www.satpimps.co.uk/showthread.php?t=131000

[pauls]

@J@mes
thanks for the reply. I've downloaded unpacked and deleted the zip another 3 times, each time the plugin folder was there but when i started SBCL the vplug tab was not there. Is there a particular way to unpack the zip?
regards,
pauls.

[^^COMPASS^^]

@J@mes
thanks for the reply. I've downloaded unpacked and deleted the zip another 3 times, each time the plugin folder was there but when i started SBCL the vplug tab was not there. Is there a particular way to unpack the zip?
regards,
pauls.

Pauls,

Extract all folders To the same Place Eg: I extracted sbcl with v plug V2.4.3 & Wsp_Nova_CY_Fixed to my Desktop!

If you pinned sbcl to start menu this could be the reason as to why vplug isn't present.

1. open (sbcl with v plug V2.4.3 & Wsp_Nova_CY_Fixed) folder
2. open (SBCL_ vpulg for humax 23.01.10r) folder
3. & start (SBCL v1.0i.exe)

You can pin wsp to start menu (but not Sbcl1.0i as it won't load Vplug)

hope this helps

[liamski]

i have been trying this for days but can not get com port to open ,nearly giving up .

[pauls]

Hi COMPASS.

I've done as you have said

extracted sbcl with v plug V2.4.3 & Wsp_Nova_CY_Fixed to my Desktop
open (sbcl with v plug V2.4.3 & Wsp_Nova_CY_Fixed) folder
open (SBCL_ vpulg for humax 23.01.10r) folder
click (SBCL v1.0i.exe)
then click run
i then get 2 error messages
libeay32.dll was not found (click ok) then
the specified module could not be found : C:\users\paul\desktop\sbcl
with v plug v2.4.3 & wsp_nova_cy_fixed\sbcl_vplug for humax
23.01.10r\plugins\vhelper.mdl

the only way i can get SBCL to open is to put the SBCL application into the
plugins folder and then start (SBCL v1.0i.exe)

it then opens but without the vplug tab

hope you can make sense of this

pauls.

[pauls]

@liamski
i had the same prob at first, have you checked
your pc port is the same as the port you are
useing in the WSP application.

Had to change my laptop to com port 1 to
match The WSP sherif333 com port 1.

hope this helps,
pauls.

[^^COMPASS^^]

Hi COMPASS.

I've done as you have said

extracted sbcl with v plug V2.4.3 & Wsp_Nova_CY_Fixed to my Desktop
open (sbcl with v plug V2.4.3 & Wsp_Nova_CY_Fixed) folder
open (SBCL_ vpulg for humax 23.01.10r) folder
click (SBCL v1.0i.exe)
then click run
i then get 2 error messages
libeay32.dll was not found (click ok) then
the specified module could not be found : C:\users\paul\desktop\sbcl
with v plug v2.4.3 & wsp_nova_cy_fixed\sbcl_vplug for humax
23.01.10r\plugins\vhelper.mdl

the only way i can get SBCL to open is to put the SBCL application into the
plugins folder and then start (SBCL v1.0i.exe)

it then opens but without the vplug tab

hope you can make sense of this

pauls.

If you have problems with sblc
EG:libeay32 is missing (sblc doesn't work)

unpack libeay32.zip & copy and paste libeay32.dll into
:C:\WINDOWS\SYSTEM 32...

This will solve the missing Vplug issue.

[kegnkiwi]

You can also just put into the sblc folder. It was missing from mine and I can confirm that just putting into the sblc folder works.:respect-055:

[pauls]

Many thanks to COMPASS & Kegnkiwi,

put that into the sbcl folder and it worked a treet.

thanks again,
pauls.