Sbcl+wsp_Nova_CY_fix

[^^COMPASS^^]

(Fixed Nova Cy 13E(On caid 0604 Irdeto2)<<
Sblc and wsp using SSSP & Null Modem cable connected to receiver with vplug_2.4.3

With this tool your TM Receiver must always be plugged to your computer via your 9 Pin Null Modem Cable
Use the same com port that you use for tm loader

Here how it works

Plug your Pc to Your TM Receiver (It is compatible with USB To serial for Laptop's)

1.Unpack sbcl_vplug & wsp_ Nova CY_Fixed _ vplug_2.4.3
2. start wsp
3. start SBCL v1.0i
4.click on Vplug Tab & enable Active
5.click on Vplug> monitor>active (now you can close the monitor window)

No internet connection required

Update New 06 key for Nova CY 13.E 10.04.2010

[johnnyboy]

not working for me on a tm1000ci .i've tried this and also tried modifying my existing and working c+ nl sblc with the irdeto.mdl and updated key but doesn't clear nova and also screws up c+.
thanks john.
update
got the above file working but has stopped again(key change?).should i be able to get c+ and nova at the same time with 1 sblc file as the 2 seperate ones are different versions v2.4.3 and v2.3.8.
thanks.
sussed it
only the cyprus channels clearing. when i did a channel scan i got 2 of most channels ie novacinema1 and novacinema1 cy only the cy ones clear.

[liamski]

does this work with tm5000 super

[^^COMPASS^^]

Nova Cyprus Active Key in use is now 06

which i also included in the vkeys update

so should be ok atm

[speedy_04]

i have treed to get this working and am confused, does this stuff need a internet and server or how do i get it working without internet???

[holmroad]

i have treed to get this working and am confused, does this stuff need a internet and server or how do i get it working without internet???

Same here mate - maybe some more comprehensive instructions could help please?:respect-057:

[^^COMPASS^^]

Info is in post one, no internet connection required
run both programmes together along with your null modem cable your receiver needs to be able to use sssp or similar.

[comber]

could anyone please what the line means
timeout .the pid is empty please rescsan
have loaded the la\test v plugs
put not clearing

[dodgybrook]

NOT WORKING FOR ME ON TM600
1737: [1] Filter 0 active - PID: 255.
1737: [1] Filter 1 active - PID: 1.
1738: COM Connecting again
1739: COM Connecting again
1740: COM Connecting again

[techmate]

NOT WORKING FOR ME ON TM60
1737: [1] Filter 0 active - PID: 255.
1737: [1] Filter 1 active - PID: 1.
1738: COM Connecting again
1739: COM Connecting again
1740: COM Connecting again

your not alone m8 i get same thing.

[^^COMPASS^^]

you guys with your posh receivers

works great on my old TM1500CI Super :cheers2:

[CBo]

Need to ensure you have the correct serial number that your null modem cable is on. SSSP is how it communicates to the technomate so need to ensure teh firmware still had that feature enabled.. was well mentioned when tps was still avaliable but recently seem to of been covered up despite still being there. Strange dvb cards have had support since 2000 tm for a few yrs while it was interesting for some

[sheild 10]

which tm is this for ? please:o11:

[dodgybrook]

need to ensure you have the correct serial number that your null modem cable is on. Sssp is how it communicates to the technomate so need to ensure teh firmware still had that feature enabled.. Was well mentioned when tps was still avaliable but recently seem to of been covered up despite still being there. Strange dvb cards have had support since 2000 tm for a few yrs while it was interesting for some

????????????????????????????????? ?
Give us a clue

[dodgybrook]

Just spent a 10 enner on\serial lead a bit angry doesnt work

[^^COMPASS^^]

works on all receivers that are capable of sssp protocol

[PAULF]

Ran WSP changed COM port to COM3(MY usb connection)
Ran VPLUG

Clears straight away

Thanks again

:cheers2::cheers2::cheers2:

[^^COMPASS^^]

Thanks for the feedback :respect-067:

[liamski]

does tm5000 super have ssssp protocal

[^^COMPASS^^]

Yes the 5000 SERIES does as long as you are using p firmware