0.9.4585

[hfmls]

yeah i stick with mproved image ratio and quality in 4487.
this works for me.
a bunch of restart bugs...but hey! it's opensat.

[rocktheroad]

I am on 4384, Imported short satellite list without unneeded satellites, with updated TP's, and channel list created just with Maz 2.3. I haven't done even slightest channel list customization within AzBox with remote. And few days I don't have any problem, and reboot messages. Looks like AzBox interface for channel list editing makes corrupted channel list which make problems.

[denton]

opensat YOU ARE A DISGRACE!!
opensat coders are stealing € from the owners!!
fix a bug, make 2 more ?!?! that way you will have jobs for decades!!no progress!

dvb subtitles and .srt subtitles broken?
bunch of amateurs! i know nothing about coding, but YOU ARE PAID AND WELL PAID to deliver!! it's your job to code!

and wow nice changelog! snce 4 or 5 versions of firmware i only enjoyed quality fix in media center (no more pixelization)
no new channel list interface
no new EPG
no OpenXCAS removed once and for all
no picon
nothing! nothing at all!
do yourselvs a favor a release the source code! pay fines to sigma or whatever but release all you can or else you will die. at least with source code released you will get € from sales to pay GPL fines or whatever.

i would have shame if i was a coder to do a ****ty job like this!

STOP INCLUDING NEW FEATURES! FIX THE GOD DAMN BUGS.

too bad there isn't another 200€ receiver i can trade for with 1080p mkv .srt playback or else i would sell it in a blink!!

over 1 year and not even a "take my hat off" improvement?!
if i was the boss you guys would be fired long long time ago!!

bahhhh
my 2 cents.

That was more like $2! But have to say I agree with you 100%. Closedshat just don't listen - Fatty drops by once in a blue moon and other than that, new firmware with new bugs.
I've giving up and mothballed my box until something happens, like release of software code or Enigma 2, neither of which are likely.

[geezerpl]

I am on 4384, Imported short satellite list without unneeded satellites, with updated TP's, and channel list created just with Maz 2.3. I haven't done even slightest channel list customization within AzBox with remote. And few days I don't have any problem, and reboot messages. Looks like AzBox interface for channel list editing makes corrupted channel list which make problems.

Could you please share that with others ?

You ment FW 4348 ? The one with fan on/off ?
Why it's so special ?? BTW the fan-thing disappeared from later versions.

WEIRD...

[tx0]

now I know why azbox software developers have their faces hidden in that mag.

[Blesi]

Still grayish haze on HD channels !!! SD channels fine !

[iwols]

yeh same here on hd with latest fw

[rocktheroad]

Could you please share that with others ?

You ment FW 4348 ? The one with fan on/off ?
Why it's so special ?? BTW the fan-thing disappeared from later versions.

WEIRD...

My bad... you are right 4348... they should accompany FW with friendly names to help us distinguish easier. Instead city names I would rather use names of great catastrophes and fiascoes to better describe contents

I have DVB-S and DVB-C tuners, and I have heard that some users have good experience with 4348 FW. Personally I have skipped that version after seeing changelog but later I was devastated with 4487 and "recording complete" & "please reboot" combo messages. So I decided to give it try. I believe that version of FW is not the most important thing, more important is work flow. Other stable FW with good experiences is 4142 which records subtitles and it is recommended by author of trimmed satellite list.

Here is what I did:

1) Formatted app area,
2) Installed 4348,
3) Replaced current satellite list with trimmed list 53E – 30W with updated TP's
4) Scanned DVB-C and DVB-S channels
5) Edited channel list with Maz 2.3 channel editor
6) Saved changes to disk and then Imported edited channel list with ACC 1.1

Trimmed satellite list should help speeding up AzBox optimizing number of satellites you can physically catch. I have used already prepared and updated list from dvlajkovic from AzBox4Yu (http://www.azbox4yu.com/showthread.php?t=773)

ACC 1.1 Import of channel and satellite list should prevent unwanted behavior. Here excerpt from ACC 1.1 changelog:

* Loading and saving channel lists into AzBox - in section: Tools-2, Channel List Everybody who has problem loading lists in AzBox and strange stufs like crazy mix after loading lists (besides that you have already erased unnecessary satelites. this way you will get clear and clean list with that that you really want to have on your STB.

Not even single change to channel list has been done with AzBox via remote. I was doing backups for every step, and for 5 last days haven't seen "Please reboot" message, which was occurring frequently earlier.

I am using mbox 4.023 on gbox servers, and it works without problems. No other changes or modifications has been done except NFS mount to NAS storage.

Of course all existing other bugs and limitations are there, this just prevents "Please reboot" message in my case.

[buyukbang]

SD channel image quality is low with 4348 and there is a bug with .sub subtitles. Player cannot dedect .sub files and even subtitle search utility cannot see .sub files :( I'm on 4348 and I watched a film after converting sub to srt yesterday.

4466 was stable.

4487 has "please reboot" errors.

[buyukbang]

But we should be fair :

quete from fw.azupd.com :

"These snapshots are generated automatically and are untested. Means the compiler found the source good enough to compile.
Dont forget that these snapshots are provided as a courtesy only and might NOT WORK. "

[denton]

But we should be fair :

quete from fw.azupd.com :

"These snapshots are generated automatically and are untested. Means the compiler found the source good enough to compile.
Dont forget that these snapshots are provided as a courtesy only and might NOT WORK. "

And being fair again - quote from site admin on the official site in response to a complaint about a bug in older FW:

"Hello,
Do you know that we are now in 0.9.4487.
_http://fw.azupd.com/
Please upgrade your firmware."

They can't have their cake and eat it!

Denton
AZBox Elite, now mothballed

[buyukbang]

Really interesting

And being fair again - quote from site admin on the official site in response to a complaint about a bug in older FW:

"Hello,
Do you know that we are now in 0.9.4487.
_http://fw.azupd.com/
Please upgrade your firmware."

They can't have their cake and eat it!

Denton
AZBox Elite, now mothballed

[tx0]

the latest fw still has issue with vbox-II while "blindscan". I've rolled back to a stable one

[Tiptronic]

worth upgrading from 0.9.4466?

[tx0]

IMHO - the short answer is NO

[Ted47]

Has anyone had problems with recording using this FW? I did not succeed!
I have to admit that I did not do a clean istallation. Maybe this was the reason. Maybe not!?

[rocktheroad]

I had problems with scheduled recording, with [rec] button evertyhing worked fine. But first problem exist almost in all FW versions.

[medmed]

@Ted47 & @rocktheroad
change channel list in the /DISK2 by this list
https://www.satpimps.co.uk/showthread.php?t=126483
and all is ok

[ManikM]

now I know why azbox software developers have their faces hidden in that mag.

hmm the ladies are fit!

EDIT: actually only 1 is.

[Tiptronic]

hmm the ladies are fit!

EDIT: actually only 1 is.

explains why things aren't progressing so fast, the guys are probably busy trying to impress those the whole time, so there's little time left for the azbox