Good news! Can you give an indication? :cup-006:Originally Posted by The_Ripper
Good news! Can you give an indication? :cup-006:
Hello everybody. I'm having problems with my spanish nagra card in my azbox. I can't get reading it.
I wonder if running debian on Azbox I could use the same combinations and versions of cccam, newcs, mpcs, etc as if I had a dreambox
Thank you in advance friends
newcs should work.
tvcabo nagra3 works really good here.
or use sbox (tododream)
I've tried a lot of things: newcs+cccam, newcs+mpcs+cccam, multicas+newcs+cccam, sbox+cccam but I've allways failed
When I used multicas or newcs+incubuscamd I could read my card, but this combinations can't be servers with cccam :banghead:
Are you telling me that there is an alternative software from ToDoDream and is based on SBIN ?
or i did understand you wrong ?
if it is true can i please ask for a link via PM
sbox is a card reader like newcs. google it pls.
plus new version from sbox will be out.
with port.list many many cards update
web interface, etc etc
The_Ripper,
Is there any news on this topic?
Regards,
Tommy
I did all the procedure and all went fine with some minor things to ask...
cccam213 worked like a charm when i finished the install but when i did a rst in the box i needed to mannually start it again... is there a way to make it run whenever the box is restarted
and 2nd and last question is that i saw somewhere that i can put a phoenix reader with a usb2serial cable and read a irdeto card with cccam... but nowhere i fount a thread or something to telling how to do that..
Thx in advance and sorry for all these questions..
cheers from greece :-)
Last edited by bluechris; 04-02-2010 at 06:54 PM.
Oh well pls anyone?
When i start the box i need to mannually enter with telnet this commands to have cccam running and im trying a whole day to find somewhere to put them to autostart on boot with no success
Does anyone know where to put them? and also i have 2 readers with irdeto card 1 is a new phoenix usb that can work also in smartmouse mode and the 2nd is a serial phoenix reader with a usb2serial adaptor. None of them is readable by cccam 2.1.3... here are my lines in cccam.cfgcd /DATA/hdb1/debian
chroot debian /bin/bash
mount -t proc /proc /proc
cd tmp
./CCcam.mipsel
SERIAL READER : /dev/ttyUSB0
CAMKEY : /dev/ttyUSB0 00 00 00 00 00 00 00 00
CAMDATA : /dev/ttyUSB0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000
TRY ALL CHIDS : /dev/ttyUSB0
Last edited by bluechris; 05-02-2010 at 12:26 AM.
After the update of Webmin to version 1.5, I can not log into the webinterface.What are usernae and password by default.
Last edited by Mangasora; 05-02-2010 at 09:23 PM.
plase Where error
plase Where error
dostum telnette chroot komutu ile debiana geçmen gerek
sende şu şekilde
MMP$[~] cd /DATA/hdb1/debian
MMP$[~] chroot debian
MMP$[~] mount -t proc /proc proc
bu komutlardan sonra istediğin cccam çalıoştırabilirsin
ama
azboxtaki dvblibapi kullanamzsın
debiandan çıkmak için exit yazmalısın ama debianda çalıştırdıgın dosyalar hala çalışır.
sadece geri planda çalıştırarak multicas,mgcamd gibi emulere paylaşım vereceksin.
resolve.conf tada sadece ortaki iplerden birini modem ipsi yap.
kolay gelsin.
teşekkurler
debian and cccam auto start scprit be found?
I have cccam running in debian on receiver and multicas connected to cccam on reciever, but no ECM's are get through Any ideas or is it best to use something other the multicas to connect.
I've tried different version of cccam 2.0.4 2.1.3 2.1.2 and even 2.1.4 just want to do some testing. but no ecm's getting trough.
Last edited by Smudger; 07-02-2010 at 07:00 PM.
The problem is that if we use multicas to connect to a cccam server anywhere then multicas is connected with "no" in the connect line that builds. Im in the same situation as you and i am trying to find a way to change how multicas is connected to cccam servers with no luck so far.
I'm not trying to share mutlicas to cccam just trying to clear picture from cccam.
You have a card on the box? or you have in the cccam of the debian install some C: lines and you connect to others?
Sorry for al the confusion.
If I run cccam on azbox under the debian enviroment do I just use dvbapi module to see picture as you would for cccam running with the plugins/lib version of cccam.
hello,
is there anyone who know how to solve this problem?:
AZBox:~# apt-get update
Ign http://ftp.debian.org etch Release.gpg
Ign http://ftp.debian.org etch Release
Ign http://ftp.debian.org etch/main Packages/DiffIndex
Err http://ftp.debian.org etch/main Packages
404 Not Found [IP: 130.89.149.226 80]
Failed to fetch http://ftp.debian.org/debian/dists/e...el/Packages.gz 404 Not Found [IP: 130.89.149.226 80]
Reading package lists... Done
E: Some index files failed to download, they have been ignored, or old ones used instead.
i think i have to update because webmin installation failed, too.
Posting Permissions
Reply With Quote
Bookmarks