Sammy 9500 ViaCI How to...Flash +

[Andrew007]

OK Guys...

Things have changed with our Sammy you NO longer need to go thru the whole old routine for Loading the S/W Updates .....
just use this Tool for everything:....
https://www.satpimps.co.uk/showthread.php?t=89235

You know you have to use a Straight Serial Cable and NOT a Null Modem one..Right..?

Here is the latest S/W Version 8.2:..
https://www.satpimps.co.uk/showthread.php?t=89234

Last but NOT least the Ram Bin.
So I have Posted one here:.
https://www.satpimps.co.uk/showthread.php?t=101706

Load the S/W and RAM*bin using the Tool above.

Here is the Editor with my Settings Dated Jan.09:..
https://www.satpimps.co.uk/showthread.php?t=101703
You will have to Configurate the LNB's to suit your needs.


Just to be Safe I have given you the Flash procedure.


********************************* ***********************
HOW TO FLASH YOUR SAMMY PROPERLY AND GET THE AU TO DO ITS MAGIC!!!

[Remember: switch your Sammy off at the back BEFORE and AFTER you program the EMU in! Do not hurry, do not cut corners, if you want it all to work properly!

After Sammy has cooled down a bit [say 2 - 3 minutes] switch it on at the back and keep it on Standby.

Now start the STUDIO 1.4 by MAHDI and go to DSR FW Loader and Send FW, then choose the Emu you want to put in [in this case the excellent 8.2] and Open -> to put the EMU in.
Wait for the clock on Sammy display, do not rush...!!!

When you start Sammy via a remote go to RESET EMU [again: via a remote] by pressing 0 + Menu quickly in succession, then go down to RESET TO EMU DEFAULTS and press the OK button on your remote.

(After it resets you can go back to EMU MENU to make sure you have the following configuration:

EMU - ON
EMM - ON
CAID Mode - AUTO
CS Mode - SSSP [if you need that one or HSIC if you're sh*ring via the Hummy CS SW]
EMU Active Mode - NO CARD [One doesn't need the Conax Card nowadays!])

Put Sammy to Standby and then kill at the back for a couple of minutes.

Restart your Sammy at the back, then leave it on Standby.

Now put the RAM *bin in [Cruiser's are excellent] if you need to, then start Sammy via Remote.

********************************* ***********************

HOW To..COMPLIMENTS OF GORAN..:cup-006: Tks Buddy.



Enjoy.:respect-050:

Cheers
Andrew