-
How to upload "Software into your Vantage"
1.Switch off the STB
2.Connect "null modem" cable
3.Bring up Winup Program
4.Click RS232 Configuration
5.Select right COM Port
6.set parameter
Bit/Set > 115200
Data bit > 8
Parity >no
Stop bit >1
Flow Control >no
7. Click OK
8.Click Upload to Receiver
9.Click ::: button to find the software
10.Select file type> hdp (dropdown)
11. Open the software
12.Click Start
13.Switch on the STB --------wait until the STB rebooting.
-
-
Updating Vantage HD-7100
Software updating using USB memory stick
1-save the software "dlp file" into a USB memory stick.
2- Connect the USB stick to USB socket.
3- Bring up the menu "Multimedia - USB
4- Select "dlp" file and press the red button on your remote control.
5- The updating process starts.wait until the receiver reboots automatically.
Last edited by T24; 11-12-2007 at 12:59 AM.
-
-
@neotionbox
hdp = E*u
dlp = Original
Regards Bilb
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks