What should I have? I downloaded M1.69, is that the latest software? Haven't found a bootloader yet, what should it be? Thanks!
What should I have? I downloaded M1.69, is that the latest software? Haven't found a bootloader yet, what should it be? Thanks!
1.69 is the most upto date sw at the moment but this does had the new ASE keys in the sw there is no new sw out for it yet.Originally Posted by bgsats
This is what new.
the Contents
1. TPS Fixed
2. Belgium card fixed(seca)
3. operating Conax 7
4. Viaccess EMM update Fixed.
5. Arena card(Cryptoworks) fixed
From a other fourm.
@bgsats,
Have you loaded the software yet? If you have, make sure that you have an internet connection to the receiver, change the network settings so that you have an IP address, and after pressing menu, press 9 six times, i.e. 999999
If you have smartcard in the menu, press fn on the remote, and check that you are connected to a server.
The status should be "Connected". The server will be in the bottom left of the screen, and it will be in the format xxFF
The main European server is 33FF
As for the bootloader, by default you cannot change server, but as per instructions from Graham, there is a process for loading a modified bootloader, which will allow other servers to be selected.
DrPaulos
Thanks, Graham7 and Drpaulos! I have SW 1.18 which I believe is the correct bootloader, can either of you confirm this please? Also found the Visionnet support forum and saw a familiar name there!
hi folks ps can anyone help me with my new vn box? i need to set it up. my friend told me about it but can lay my hands on him to help set it up. i av a broadband connection and just eager toget going. the box is a visionet 8000series.thanks remzy29.
@bgsats and remzy29,
I have PM'd you both with the detail for where you can find support.
DrPaulos
All so have a read of this as this will help you all so. drpaulos & me will get you up and runing in no time.
https://www.satpimps.co.uk/showthread.php?t=56437
@Graham7 or drpaulos,
got my visionnet 8000cis today and i'm a little confused how to get going with loading software and what to use to start with when i go to menu and find no card slot i press 9999 but still nothing appears this is the info off the box.
SW: 1.12 VN-8000fcis
HW: 8000 CI-0.3-SZV0-M1.4DE
3300- 0000- 000000000000000
could you explain to me what boxloader to use i have downloaded 1.2 is this right and what software to use i have downloaded m1.69_up_33_MDR_NL_81_TX1000CIS.Z I is that right.
Also will my Digitalb sub run in this reciever.
Regards Jono
Last edited by Jono; 03-12-2006 at 01:02 PM.
@Jono,
The latest software is 1.69, and the best loader is Mitega Vision Tools 2.8
Graham's read me is worth checking out. I will also PM you where you can get full support/files/manuals, etc
DrPaulos
Read and printed Graham7's readme, done as directed by PM (thanks Drpaulos!), just need to know whether SW1.18 is the correct bootloader, can either of you confirm this please, I have it here ready to load, thanks!
You should be able to use 1.18. Then load on the latest software - 1.69.
Once up and running, and the receiver is connected to the internet, you can do what is called Internet Software Update, where you enter the URL from the remote. I cannot give you the address for it here, but if you follow as per the PM, you will find the info you need there.
DrPaulos
Ok, that's fine - one more question, if using Boxloader 1.3, do I select "Upgrade Bootloader" for 1.18, then "Upgrade Software" for 1.69?
You can do that, or use Mitega Vision Tools 2.8
You really need to go to the place in the PM. There is an awful lot more info on there that you can think of, and I have time to write right now
DrPaulos
OK, I'll do that, just trying to take a few short cuts! Thanks for your help.
Just like to say thanks you all it is up and running.
Regards Jono
Likewise, now working, thanks!
Well done chaps!
DrPaulos
Easy when you know how welcome to the club.
Yes, I have to agree, Graham7's instructions are very comprehensive and cover every eventuality. I was expecting complications with the LAN connection, but there were none, the connection was made automatically. Anyone who can update a receiver's software with a null modem lead should be able to do this!
Posting Permissions
Reply With Quote
Bookmarks