DM8000 not booting

[luis]

After trying to reboot the receiver doesn´t do the usual procedure of rebooting. The same thing happens when trying the hard restart with the switch on the back side. The display ligts up showing the "powered by DREAM multimedia" inscription, but it stays there and doesn´t procede the usual way (to "booting" and then "loading enigma"). Tried to load another image using the back side switch while keeping the lower front button pressed (a "STOP" should appear on the display and then, after releasing the button, receiver´s IP), but it doesn´t work. Has anybody any idea what to do?

[hda5]

Not sure if this will help but try pressing the higher front button instead and see if that works.

[luis]

I did that too, but no luck. So far, I have installed several images into this receiver, always using the lower front button, and it always worked. I guess the reason might be some defective hardware element. If so, it´s pretty hopeless.

[oldfart]

could be the bootloader is corrupt if you don't get the 'STOP' message
have a search around for how to install a new bootloader

[wolves]

Hello luis
Think you need computer with com port/null modem cable/latest dream up program,
for flashing your dreambox..

Regards Wolves :respect-051:

[bonehead]

Looks like your right there Wolves just about to say the same thing trouble is most newish computers don’t have a serial port nowadays, that’s why I still have kept an old computer on XP.

Regards,
Bonehead