Might be a day or two before I get chance to have another go at my VU+ box.
My wife doesn't always appreciate me disconnecting the TM box, so she can't watch her favourite programmes, and connecting the VU box in it's place. :)
Cheers
Gerry
Might be a day or two before I get chance to have another go at my VU+ box.
My wife doesn't always appreciate me disconnecting the TM box, so she can't watch her favourite programmes, and connecting the VU box in it's place. :)
Cheers
Gerry
just thought I would test these on my vu solo 2, running image BH v3.0.5 (menu , information , about) using various emus and the latest keys by INFORMED from here , plus a 2018 catseye channel list, plus some of the files from the sticky threads in the vu solo2 discussion forum here on pimps
testing in cccam 2.30 I got nothing at all (no decryption)
testing in mgcamd v1.38 the following worked ok
I suspect that any failures are down to not having a correct ID or lamedb file or whatever and something needs correcting , but I never understood those corrections from those sticky threads in the vu solo 2 forum some 4 years agoCode:SD - BBC 1 England - OK SD - BBC 1 Scotland - OK SD - BBC 1 NI - OK SD - BBC 1 Wales - OK SD - BBC 2 England - OK SD - BBC 4 - OK SD - BBC NEWS - OK SD - CBBC - OK SD - CBEEBIES - OK SD - BBC Parliament - OK SD - BBC Red Button - OK SD - Film 4 + 1 - failed HD - BBC 1 HD - failed HD - BBC 2 HD - failed HD - ITV 1 HD - failed HD - CH 4 HD - failed HD - CH 5 HD - failed HD - STV HD - failed HD - UTV HD - failed HD - BBC 4 HD - failed
I tested oscam ymod and that didnt work
I then tested my current oscam which is version r11398 , most of the ones that were ok in mgcamd also worked in oscam11398 but only from a feed off the net, not locally , so MGCAMD worked for me
so I still need to figure out how to open some of them but the ones that worked should help you
I havent tried openvix but you should find that works ok as an image too
ps:- reading your last post , ideally you could do with a twin or quad output lnb so you can have a test feed and not disturb the technomate feed until you are ready
you dont need a sat feed to reprogram your vu , you only need a sat feed to test it when complete
edit
just tested openvix hades and almost all opened on 27.5w using mgcamd v1.38 and the latest usr keys by informed
I have been using notepad++ to edit my lamedb channel file and this is my up to date working list with mgcamd v1.38 (I got oscam and oscam ymod working but less channels opened for some reason)
the list on page 9 here https://www.satpimps.co.uk/showthrea...st-guide/page9 has the details included that need to be placed into the lamedb file as detailed on page 1 in that thread, plus the other files etcCode:SD - BBC 1 England - OK SD - BBC 1 Scotland - OK SD - BBC 1 NI - OK SD - BBC 1 Wales - OK SD - BBC 2 England - OK SD - BBC 4 - OK SD - BBC NEWS - OK SD - CBBC - OK SD - CBEEBIES - OK SD - BBC Parliament - OK SD - BBC Red Button - OK SD - Film 4 + 1 - failed HD - BBC 1 HD - OK HD - BBC 2 HD - OK HD - ITV 1 HD - OK HD - CH 4 HD - OK HD - CH 5 HD - OK HD - STV HD - failed HD - UTV HD - failed HD - BBC 4 HD - failed
your findings are correct and up-to-date. Film 4+1 has stopped broadcasting not too long ago, BBC4 HD was on last year for a couple of months but now off and STV HD and UTV HD were never actually there as such but only as data.
I still have Film4+1 working. I don't understand why, but I just tried rescanning that sat and it didn't work. Before doing so I did a backup, and when I reloaded the backup it worked again.
I have a DM500HD with image openpli
I would like to see BBC's channels at 27.5ºW.
Can someone help me?
Many thanks in advance
same advice to you as in this thread and in the linked thread from the VU SOLO2 sticky threads
try altering your lamedb file to the published parameters and try using mgcamd and/or oscam as emus to open those channels by using the required keys by INFORMED in the correct folders (assuming it can be done on a Dreambox)
its the same info for all these linux boxes, so if the box is capable you use the same files and same info etc
I will try.
Many thanks echelon for the precious help
I only managed to open 3 channels: BBC NEWS, BBC BUTTON, CBeebies,
and only with Ccam and oscam-emu.
well , thats a start , so you now need to check the idents on the lamedb file and set them to the parameters listed in that other thread, for the rest of the channels that I said are open on 27.5w
ie:- if you can open 3 , then the rest should work, if the data is correct , so I suspect your lamedb file needs more work
What is the best image to watch BBC-27.5w channels on DMB 900HD?
Someone managed to "open" the channels:
****** Alba
****** BBC RB0
****** BBC FOUR HD
****** STV HD
****** UTV HD
Hi there
solo2 working well with oscam Ymode is it possible use DM900 and open that channels any specific image for DM900 I did try DreamElite no success
Just been having another go at following the 27.5 West guide.
If I restart my box a get a Black Hole logo followed by a VU+ logo.
The VU+ screen shows "loading" in the bottom RH corner.
Menu/information/ About shows:-
"Version 2018-03-30-vuplus_experimental
Image Experimental 2017-03-02"
Followed the instructions:-
"download the oscam-ymod ipk for vix or blackhole below
put ipk file on a usb stick plug it in to your box
it will then prompt to install it"
Downloaded the blackhole ipk and copied it to my USB stick.
plugged it into my box but didn't get any prompt to install it.
Cheers
Gerry
ftp it to your tmp folder on the box and use the menu to install it , by choosing the ipk installer option and choosing the file in the tmp folder
Sorry to be thick but how do I choose the ipk installer in the menu.?
Been through the Menu options I have but can't find a ipk installer option.
Cheers
Gerry
press the green button and look through the various options (yellow)
or , MENU , ADDONS
Thanks for your patience.
Pressing the green button doesn't give me any options.
ADDONS is not an option in MENU
Cheers
Gerry
In Black Hole, and Open Black Hole, 2 slightly different images, the green button, on your remote, brings up the green panel, then you press the yellow button, to bring up the addons menu options.
Looking at an earlier post, you mention going into the menu, selecting about, and getting the image version.
I think that information shows that you still have the official VU+ image loaded, can you please confirm this information, and the fact that you have the VU+ Zero.
The original VU+ Zero, not the VU+ Zero 4K, was not really intended as a stand alone receiver, as it hasn't got the hardware to do many things, like KODI, but is capable of loading addons, and opening 27.5W.
Bookmarks