The HTTP section now lists the following updates: HitechBox _2.2.21_2017.05.03.bin and IPBOX_2017.05.03.bin
The latter is the first of its kind I've seen. Could it be specifically for IP issues? Pity we don't have blackdevil's
guidelines on this.
The HTTP section now lists the following updates: HitechBox _2.2.21_2017.05.03.bin and IPBOX_2017.05.03.bin
The latter is the first of its kind I've seen. Could it be specifically for IP issues? Pity we don't have blackdevil's
guidelines on this.
lonewolfe (04-05-2017), tinto de verano (04-05-2017)
Hi, Not much information available. I believe the ipBox update is for IP issues of HitechBox. Regards
Correction. Disregard my vague assumption of IPbox update in my earlier post please. Answer from the Guru in other forum is as under:
"sw IPBOX -> Do Not use it for your boxes, this sw is for other customers
Mscamd users : sw 2.2.08
IKS users : sw 2.2.22
In these latest sw we added a new protocol and we are improving it, it will be for renewing your codes".
Aldo (04-05-2017), donegalman (06-05-2017), Dr. House (06-05-2017), glenby (06-05-2017), Jacobo40 (05-05-2017), johnhenry (05-05-2017), Locoman (05-05-2017), port06 (06-05-2017), tinto de verano (04-05-2017)
Meanwhile a new update --2.2.23-- has been added to the HTTP section.
Aldo (06-05-2017), Locoman (07-05-2017), tinto de verano (07-05-2017)
There is a new service in 2.2.23. IKS NEW
tinto de verano (07-05-2017)
And, apart from New protocol in latest sw 2.2.23:
IKS NEW service,
there also seem to be options for:
gscamsd service
Mscamd service
superIKS service
But no further info so far...
tinto de verano
Downloaded and installed 2.2.23 but haven't been able to activate the IKS NEW Service that is offered. What the "new and improved" IKS service is designed to improve is not clear. The Unit still functions well with "standard" IKS. though.
tinto de verano (09-05-2017)
The following was posted on the other forum ref the above situation:
Re: Hitech Box HB9000
I was able to download 2.2.23 as an upgrade from 2.2.22, where Superiks has been functioning fine.
However I find I can't load the NEW IKS service, despite appearances ("IKS NEW active success,please wait 5 seconds").
I was able to return to Superiks, although I would like to install the new version.
Any advice?
Hi Aldo there has been another update last night 2.2.24 for IKS no info on what has been updated.
Hi, Some new information from the other forum.
"IKS NEW is different service than SuperIKS so it means different code needed".
Aldo (10-05-2017), johnhenry (10-05-2017), tinto de verano (10-05-2017)
A question was posted in the other forum with regard to IKS Hitech Box
So how does one get the new code required, and how much would it cost, or will that info be made available via the new firmware update.
Sorry Aldo I thought the question was posted by a member of the other forum. Now I Will remember the name and avoid duplication.
" So how does one get the new code required, and how much would it cost, or will that info be made available via the new firmware update. "
The answer to that query was posted by blackdevil and is as follows:
You can watch last channel in IPTV Bonus, the HitechBox Info channel, you will get the email, you can send message so they can inform you how you can get code.
there was also another query answered:
HitechShqiptv sw is for our box but for customers for IPTV and Albanian channels.
Aldo reference the last channel in IPTV Hitechbox Info. it seems this is now blank I have tried several times recently to see if the information is back ( I wish now I had wrote the information down on a piece of paper) I have only a few days left on my MScam. I might consider IKS for the future now that both MScam and IKS updates are available.
@johnhenry
Have you tried to go back to one of the older firwares, and see if you can get the info that you require, and once you have it you could just then do the HTTP update to bring your receiver back up to date, and why did you not copy paste the info onto notepad/wordpad, name it whatever and store it in my do***ents.
Aldo it was working with the latest sw 2.2.08 because I always check all the apps to see if they are working and I checked Hitechbox info, have to say I did not expect it not to work being in the servers interest for members to renew. Noticed also since the weekend one of the ***** sites ****tube which was working okay is now causing the receiver to reboot which make me wonder if there is a server issue. Hopefully a new update will correct in the future.
Aldo (13-05-2017)
hitech info channel now last channel in ALL just checked its still there
mrfire Hitechbox info is there in IPTV last channel, but when I click on to open it nothing happens just blank screen.
Bookmarks