Results 1 to 2 of 2

Thread: Setup Guide for the HitechBox HB9000

  1. #1
    File Guy
    Join Date
    Nov 2013
    Posts
    582
    Thanks
    388
    Thanked 718 Times in 384 Posts

    Setup Guide for the HitechBox HB9000

    Setup Guide for the HitechBox HB9000
    First connect up the required cables to your new HitechBox HB9000 Box, HDMI Cable, Network cable, LNB Cable and Power lead then switch it on.

    Patch Loading
    Only use the correct and latest patch for your Model, link below.

    https://www.satpimps.co.uk/forumdisp...p?796-Firmware

    PLEASE NOTE: There may be a later update using the HTTP Online update.!!

    PLEASE ALSO NOTE: If you have a channel list loaded remember to save it first.
    Put a USB Stick in, go to Main menu, To second icon screen, Upgrade and Backup, Backup in USB, Backup Database, use the preset 'database.bin' and press the FAV button on remote to save.

    To load a new channel list
    Put the new channel list on your USB stick, then in Main Menu Use the Upgrade & Backup Icon/Upgrade by USB/Upgrade Type/Press OK/Select Channel Data/select Start/select USB Stick/select your channel list.


    When downloaded, unpack it using 7zip, Winzip or WinRar depending on which compression was used (free downloads) and copy the uncompressed file to your USB stick.
    Place the USB stick into either of your USB slots then goto Main Menu (12 Tiles screen) / right ‘V’ Volume button to the second Tile screen / Upgrade and Backup / Select your USB Drive / Select the unzipped HitechBoxHB9000.bin file, wait until box reboots.
    Alternative is the online update FTP or HTTP. Use Red button /Green Button or Red Button / Yellow button.

    Satellite Scanning (Motorised)
    First goto Menu / Sat Installation / Installation / Motor Settings / Find and Select a Satellite you can view / scan from your location using the right or left ‘V’ Volume side buttons then down to Enable Motor Settings to USALS and enter your correct Long and Lat, continue to select any other Sats you require to scan by selecting and setting each one to USALS, this will Save / remember your USAL settings, then Exit button.
    Then scroll up to Satellite list and press the Ok button to give a tick to all the Satellites you set up for USALS. Then Blue Button Channel Scan, I used Auto Scan, Go make a Coffee or Grab a Beer until scanning is done.

    Emulator keys
    Main menu / Sat Installation / Conditional Access / EMU Keys Editor, 3 Options 'Edit' , 'Add' , or 'Fav' Get keys from Internet.

    DiSEqC setup.
    Some very usefull DiSEqC setup info in the link below thanks to johnhenry
    https://www.satpimps.co.uk/showthrea...lation-problem

    Update to Mscam Dec 2016

    Mscam Setup for 2.1.93 and later releases via http upgrade. This also applies to the other encryption types in the IP Sharing Protocal Menu.

    Sat Installation / Condition Access / Enter Pass / OK on IP Shared Protocol / Select Mscamd / Scroll down to Mscamd / Enter Active code / Press FAV button to save / Press Test / Select Test, should give Success and remaining days to expiry, Exit out.


    Time to start MsCam In older firmware.
    Main Tile menu / Sat Installation / Installation / Conditional Access / 1111 / Net Client / Press red button Active Account / Down to MScamd service / OK button / OK button on Active code and enter your 10 digit code (Given by your supplier) / FAV button to save.


    Adding your own Cccamd lines, In older Firmware
    Main Tile Menu / Sat Installation / Conditional Access / 1111/ Net Client / Press OK on a Red Reader / right or left ‘V’ Volume button to select Cccamd / Enter your Port / User and Password details and set Enable to On / Red button to Save.

    IKS, in older Firmware
    Please note you will need to purchase and enter an IKS key to use this option, I have read that you can use your ‘ if still valid’ Spiderbox Key, but only in one box at a time and with the other Cams switched off in the Net Client menu.

    Streaming side of the Hitech Box
    As you have noticed there is a lot more to this tiny STB than just Satellite viewing.
    Online streaming seems to be the way forward at the moment with faster and more reliable ISP’s around.

    Stalker Portals
    The Portal numbers 1 to 4 are for entering your own found sites.
    There are four preset Operator Portals which are accessed by scrolling down (CH Down arrow Button on the remote) to Operator Portal then using the ‘V’ Volume right arrow button to select the set you want, then press the Ok button. Use ‘V’ button to scroll through the 10 categories.
    Press Exit button to get back to the Main Tile Menu.

    VOD
    Press the VOD Tile and Explore.

    IPTV World
    Press and Explore, Try IPTV Bonus.

    STB Client
    The STB Client is a usefull app to add to your Android Tablet or Phone.
    This will allow you couch potatoes to view and control your Hitech HD9000 via your Tablet or Phone while you are away from it.
    I have it installed and its partially working. I can get the channel lists up and remote control the Box but cannot view any channels ATM, but this could be down to me.

    I will add more as needed or when something is asked about in the Forum.
    jbvid
    Last edited by jbvid; 08-01-2017 at 10:44 AM. Reason: Mscam Update

  2. The Following 28 Users Say Thank You to jbvid For This Useful Post:

    2colby (09-02-2016), Aldo (09-02-2016), audi-tek (11-11-2016), blogfred (13-02-2016), centaur (28-04-2018), cutain (17-11-2016), djoreydjo (06-07-2018), donegalman (10-02-2016), Dr. House (11-07-2016), echelon (09-02-2016), evens (09-02-2016), flashharry (09-09-2016), gibson (10-02-2016), halfax (09-02-2016), hda5 (09-02-2016), johnhenry (09-02-2016), lonewolfe (10-02-2016), mikej05 (11-12-2016), PAULF (27-07-2016), port06 (16-03-2016), quasireality (08-05-2016), Rainhampete (04-11-2016), Roadrunner (09-02-2016), rolec (17-02-2016), tinto de verano (10-02-2016), vasf (08-04-2017), waverider (29-02-2016), welshpaddy (09-02-2016)

  3. #2
    Security Admin echelon's Avatar
    Join Date
    Dec 2004
    Posts
    12,732
    Thanks
    13,913
    Thanked 9,112 Times in 4,411 Posts
    FORCE UPGRADE PROCEDURE from this thread

    https://www.satpimps.co.uk/showthrea...ew-Hitech-9000

    Rename the Patch Software force_upgrade_rom and press this on your remote control many times

    OKOKOKOKOK

    until you see your box start to get the software back from the usb stick

    New flash drive, force_rom_upgrade and my box is back to life

  4. The Following 2 Users Say Thank You to echelon For This Useful Post:

    jbvid (14-03-2016), philips (18-03-2016)

Similar Threads

  1. HitechBox HB9000 Patch 22/01/16
    By blackdevil in forum Firmware
    Replies: 0
    Last Post: 22-01-2016, 08:53 PM
  2. HitechBox HB9000 Patch 20/01/16
    By blackdevil in forum Firmware
    Replies: 0
    Last Post: 20-01-2016, 08:48 PM
  3. Setup Guide for Spiderbox 6000HD
    By Aldo in forum Spiderbox 6000 HD
    Replies: 3
    Last Post: 12-09-2015, 09:41 AM
  4. Setup Guide for Spiderbox 6000HD
    By ^^COMPASS^^ in forum Guides & FAQ
    Replies: 1
    Last Post: 09-05-2013, 10:56 PM
  5. Setting up your SpiderBox Setup & Installation Guide
    By spiderlover in forum Guides & FAQ
    Replies: 5
    Last Post: 10-10-2011, 10:29 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •