Results 1 to 1 of 1

Thread: Dummies guide to setting up Vu+ Solo 4K

  1. #1
    Goldwafers.co.uk LeeGW's Avatar
    Join Date
    Dec 2004
    Posts
    89
    Thanks
    20
    Thanked 505 Times in 42 Posts

    Dummies guide to setting up Vu+ Solo 4K

    Dummies guide to setting up Vu+ Solo 4K by Lee Goldwafers.com

    Click Here to Buy Vu+ Solo 4K

    Useful Software
    7zip - http://www.7-zip.org/download.html
    Winrar - http://www.rarlab.com/download.htm
    Either of the above software can be used for unzipping the files.
    VuCC - https://www.satpimps.co.uk/showthrea...ol-Centre-V0-8

    Connecting LNB cable(s) don't get Tuner A and Tuner B mixed up.
    Look on the back and make sure Tuner A cable goes into LNB 1 and Tuner B cable goes into LNB 2.
    Click on image to expand and see the tuner A and B inputs properly.

    1. Installing BlackHole Image

    Download the latest BlackHole image from here
    https://www.satpimps.co.uk/forumdisp...Solo-4K-Images

    Unzip the Blackhole_image_usb.zip file and extract the vuplus folder to a USB PEN Drive.

    After unzipping to the pen drive you should have a folder on your USB pen drive named vuplus

    In the vuplus folder is another folder named solo4k

    Power off Vu+ Solo 4K with switch on the back
    Open the front flap on the right hand side.
    Insert USB Pen Drive into the front USB socket behind the front flap.
    Power on Vu+ Solo 4K

    When you see the "Update! Press Power" message on the front display, press the power button (located behind the front flap to the left of the USB socket)

    Once the image has been successfully installed the receiver will reboot automatically.

    2. Setup Motorised Dish using USALS

    First get your longitude & latitude info from _http://www.satsig.net/maps/lat-long-finder.htm

    Enter your post code into satsig.net and you'll get the correct LON & LAT info for your location.

    Example if I enter the following UK postal code: SE1 6JZ into _http://www.satsig.net/maps/lat-long-finder.htm

    I get the following LON & LAT:
    Longitude: -0.1042°
    WEST
    Latitude: 51.4979°
    NORTH

    Press Menu
    Select Setup Press OK
    Select Service searching Press OK
    Select Tuner configuration Press OK
    Select Tuner A Press OK

    This is how to configure Tuner for Motorised Dish using USALS.
    Use the < > buttons on remote to select Configuration: Simple.
    Use the down button to select mode and use the < > buttons to set to Positioner.

    So your screen should look something like this...

    Configuration Mode: Simple
    Mode: Positioner
    Longitude: 0.104 (Make sure you enter your own Longitude settings here)
    WEST
    Latitude: 51.497 (Make sure you enter your own Latitude settings here)
    NORTH

    Press OK to save.

    Press Menu
    Select Setup Press OK
    Select service searching Press OK
    Select Positioner Setup Press OK
    Select goto 0 Press RED Button

    Dish should now goto 1w.

    3. Installing Softcam
    Download the enigma2-plugin-cams-oscam_11077_all.ipk file from
    https://www.satpimps.co.uk/showthrea...BH-Solo4K-Emus

    FTP the enigma2-plugin-cams-oscam_11077_all.ipk to the /tmp folder on your Vu+ Solo 4k.

    Now to install Oscam via the Black Hole menu.

    Press Green Button then Yellow Button on Vu+ remote control.

    Select Manual Install IPK Packages.
    Select the enigma2-plugin-cams-oscam_11077_all.ipk file and press OK.
    Message will appear - Do you want to install enigma2-plugin-cams-oscam_11077_all.ipk


    Select "Yes" and press OK.
    Message will appear - Installed.
    Press the exit button on remote a couple of times to come out of all the menus.

    4. Activate Cam
    Press the Blue button and use the < > buttons on remote to select Oscam.
    Press OK to run the CAM.

    Oscam config files are located in /etc/tuxbox/config

    5. Upload a Channel List
    Download a pre-configured channel list example catseye's from

    https://www.satpimps.co.uk/forumdisp...gma-2-Settings

    For motorised dishes you'll want to look for this thread "CATSEYE E2 settings lists (VARIOUS SATELLITES)"
    Go to the last page in that thread to download the latest Catseye E2 Settings File All Sats.rar file.

    Unzip the Channel List to your local HDD.

    Example C:\Catseye E2 Settings File 75 East-45 West

    Use VuCC to upload channel list to Solo 4K.

    VUCC is an essential tool to have.
    Download VuCC From
    https://www.satpimps.co.uk/showthrea...ol-Centre-V0-8

    How to setup Vu+ with VBox II DiSEqC 1.2 Positioner.

    If your VBox II already has the satellite positions stored and your changing from an old receiver to Vu+ then follow this procedure.

    Write down your VBox II satellite position numbers. These are the numbers displayed on the front of the VBox II when moving to a
    specific satellite position. These position numbers can also be found in your old receivers motor setup menu.

    Example lets say...
    Position 1 on VBox II = Astra 19e
    Position 2 on VBox II = Eutelsat W2 16e
    Position 3 on VBox II = Hotbird 13e

    You get the idea...

    First send the dish to Astra 19e using Vbox II.

    On Vu+ Remote Press Menu
    Select Setup Press OK
    Select Service Searching Press OK
    Select Tuner configuration Press OK
    Select Tuner A Press OK

    Now set Configuration Mode to Advanced. Use Left or Right keys on remote to select.

    Configuration Mode: Advanced
    Satellite: Astra 19e
    LNB: 1
    DiSEqC mode: 1.2

    Scroll down to bottom of the page with the down arrow on remote.

    Use USALS for this sat: No
    Stored position: 001

    Press OK to store.

    OK that's Astra 19e setup now to setup Eutelsat W2 16e

    Now send the dish to Eutelsat 16E using Vbox II.

    Select Setup Press OK
    Select Service Searching Press OK
    Select Tuner configuration Press OK
    Select Tuner A Press OK

    Configuration Mode: Advanced
    Satellite: Eutelsat W2 16e
    LNB: 2
    DiSEqC mode: 1.2

    Scroll down to bottom of the page with the down arrow on remote.

    Use USALS for this sat: No
    Stored position: 002

    Press OK to store.

    OK that's Eutelsat W2 16e setup now to setup Hotbird 13e

    Now send dish to Hotbird using Vbox II

    Select Setup Press OK
    Select Service Searching Press OK
    Select Tuner configuration Press OK
    Select Tuner A Press OK

    Configuration Mode: Advanced
    Satellite: Hotbird 13e
    LNB: 3
    DiSEqC mode: 1.2

    Scroll down to bottom of the page with the down arrow on remote.

    Use USALS for this sat: No
    Stored position: 003

    Press OK to store.

    You get the idea, now repeat for the rest of the satellites and your done.
    Attached Images Attached Images
    Last edited by LeeGW; 03-11-2015 at 04:50 PM.

  2. The Following 14 Users Say Thank You to LeeGW For This Useful Post:

    alan1948 (18-11-2015), automan2 (14-04-2016), chris-k (03-11-2015), den123 (21-10-2016), HughR (28-01-2017), jos1311 (09-12-2015), jovie (07-08-2018), nedrige (23-07-2016), Nikkas (03-11-2015), ozzy30 (24-12-2015), rainman287 (29-12-2015), saintomer1866 (03-11-2015), seagate1 (03-11-2015), sonic1 (03-11-2015)

Similar Threads

  1. Dummies guide to setting up Vu+ Zero
    By LeeGW in forum Vu+ Zero Help Section
    Replies: 5
    Last Post: 18-05-2018, 10:15 PM
  2. Dummies guide to setting up Vu+ Solo
    By LeeGW in forum Vu+ Solo Help Section
    Replies: 8
    Last Post: 11-04-2015, 12:06 AM
  3. Dummies guide to setting up Vu+ Solo SE
    By LeeGW in forum Vu+ Solo SE Help Section
    Replies: 2
    Last Post: 11-04-2015, 12:05 AM
  4. Dummies guide to setting up Vu+ Duo
    By LeeGW in forum Vu+ Duo Help Section
    Replies: 15
    Last Post: 11-04-2015, 12:00 AM
  5. Dummies guide to setting up Uno
    By LeeGW in forum Vu+ Uno Help Section
    Replies: 2
    Last Post: 14-03-2015, 12:31 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •