Results 1 to 7 of 7

Thread: motorised dish problem

  1. #1
    Junior Member
    Join Date
    Dec 2004
    Posts
    11
    Thanks
    1
    Thanked 0 Times in 0 Posts

    motorised dish problem

    Hi hope this has not been answered before I have searched but to no avail, I have a dreambox 800 se with a motorised dish had no problem until a few weeks ago the dish stopped working tried renewing channel list, factory reset, bought a new motor but still could not get it to work, today I borrowed a friends dreambox 800 Hd replaced my old motor and reset all the setting and bingo finding all the satellites, reinstated my own box not working, does anyone have any had this problem and managed to fix it? or any suggestions I could try.

    thanks

    ronnieb

  2. #2
    Senior Member harddriver's Avatar
    Join Date
    Aug 2006
    Posts
    191
    Thanks
    64
    Thanked 146 Times in 102 Posts
    Hi

    Have you insert your correct Datas ? ( Longitude/Latitude )
    and have you set in the same settings Window the Menue Point
    Rotor is exclusively controlled by this Dreambox to yes ?
    Have you also set in the Menue Setup/System/Customize
    the Point : Enable multiple bouquets to yes
    This settings Works for me on all my DM Boxes 800se/8000/7080
    if thoose settings will not Work on your Box maybe the Tuner
    of you Box has an Defect
    Attached Images Attached Images

  3. The Following User Says Thank You to harddriver For This Useful Post:

    ronnieb (08-10-2015)

  4. #3
    Junior Member
    Join Date
    Dec 2004
    Posts
    11
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Hi
    Thanks for your quick reply yes I have put the right latitude and longitude setting the rotor is in full control but there is no option to allow multiple bouquet the last option on the screen is rotor turning speed which is set to fast and the two options after that are missing.So do you think it's the tuner at fault?

    Ronnieb

  5. #4
    Senior Member harddriver's Avatar
    Join Date
    Aug 2006
    Posts
    191
    Thanks
    64
    Thanked 146 Times in 102 Posts
    Hi

    Go to the Menue/Setup/System/Customize an set the 1th Menue Point : setup Mode : to Expert than you will have more
    setting options in the same Menue include Enable multiple bouquets
    Also i would recomand you to do a Software Update,donīt no which Image you use,i use
    DMM Org Experimental Images on my Boxes and Update my Boxes via Telnet or via
    the Boxes Software management.
    If all this Steps donīt Work for you try to Flash the Box from scratch on may this will Help.

    Otherwise your Friends Box Work on the same system so have you tryed the same settings
    from the DM800 ( Friends Box ) on your 800se ? will this Work ?
    itīs difficult from a distance to make a diagnosis but the possibility of a defect tuner is quite given
    Last edited by harddriver; 09-10-2015 at 05:42 PM.

  6. #5
    Junior Member
    Join Date
    Dec 2004
    Posts
    11
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Yes I have got the menu on "expert mode" and it's options are the same as your inset picture but the last two options on your list or not there on mine, also compared settings on my friends dreambox, not sure how to find the firmware but it's the original firmware software management "blackhole with Sunray 4 sim2"been along time since I upgraded firmware and I believe it's done though the network now not with a lead to a computer as when I last did it on Eagle box will have to get up to speed with that.

    Thanks again for your reply

    Ronnieb

  7. #6
    Senior Member harddriver's Avatar
    Join Date
    Aug 2006
    Posts
    191
    Thanks
    64
    Thanked 146 Times in 102 Posts
    Hi

    As you have a Clone ( Sunray ) i donīt no how and
    what Image you have to use for Updates,Sorry
    but donīt use DMM Org Images this Images will never Work on your Box
    Maybe someone else,with a Clonebox,could Help you better than i can.

  8. #7
    Junior Member
    Join Date
    Dec 2004
    Posts
    11
    Thanks
    1
    Thanked 0 Times in 0 Posts
    ok thanks for your time and help anyway.

    ronnieb

Similar Threads

  1. motorised dish problem
    By markez in forum Dish Discussions
    Replies: 2
    Last Post: 27-04-2011, 12:16 PM
  2. motorised dish problem
    By marky.b in forum Dish Discussions
    Replies: 6
    Last Post: 09-01-2011, 12:33 AM
  3. DM500 motorised dish problem
    By steevs28 in forum Dreambox DM500HD
    Replies: 2
    Last Post: 25-09-2010, 12:15 PM
  4. Problem With Usals and Motorised Dish
    By dribbled in forum SpiderBox 9000 HD
    Replies: 18
    Last Post: 13-08-2010, 05:16 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •