Results 1 to 3 of 3

Thread: Bh 2.1.7

  1. #1
    Senior Member
    Join Date
    Dec 2004
    Posts
    115
    Thanks
    5
    Thanked 15 Times in 7 Posts

    Bh 2.1.7

    Hi, since updating to the latest FW, reinstalling vHannibal etc none of the channels are showing any signal. I've tried reinstalling settings, updating software rebooting etc but no change, does anyone have an ideas?

    Also is there a preferred order of tuners in the ultimo? Current layout is A usals, B C/T, C single and D single.

    Thanks

  2. #2
    V.I.P
    Join Date
    Dec 2004
    Posts
    2,809
    Thanks
    1,305
    Thanked 4,802 Times in 1,938 Posts
    Are you using a motor?

    Go into your main menu/setup/service settings/tuner configuration:

    Check your tuner is like this Tuner A (depending on where you have your lnb cable driving your motor you might have to swap these):

    Configuration mode: Simple
    Mode: Positioner
    Longitude & latitude - set these for your area.

    Tuner B - Second cable or motorised LNB Tuner A


    Exit the setup menu.

    Open your channel list - hit blue button - go to a bouquet on a different satellite from what you're currently on - select a channel.

    If your motor doesn't move - check your cables or swap the settings around - Tuner B/A.

  3. #3
    Senior Member
    Join Date
    Dec 2004
    Posts
    115
    Thanks
    5
    Thanked 15 Times in 7 Posts
    Thanks for replying mrdude.
    I had to reinstall before I could get it to work, still don't understand why it wouldn't work before.

  4. The Following User Says Thank You to luis88 For This Useful Post:

    mrdude (26-07-2015)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •